-
Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
-
Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.
🎨Texturing Contest #32 - Final Form
- Status
- Joined
- Dec 30, 2007
- Messages
- 1,554
I guess I can share it here as well. Just please, party people, don't read too much into it. I was drunk - as per usual - writing it and it's very... "Angry", for some reason. I really don't know why however. Anyway, here you go I guess:
www.hiveworkshop.com
And, the entire conversion process can be replaced in Blender these days, you just need to some open source plugins. Just google "Blender MDX MDL plugin" or something like that.
Utilizing 3D Coat for Warcraft 3 Retextures
www.hiveworkshop.com
And, the entire conversion process can be replaced in Blender these days, you just need to some open source plugins. Just google "Blender MDX MDL plugin" or something like that.
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 3,667
WiP #2
I know it's been a while since the last WiP as progress has been slow and life has been busy but I've been able to get a bit more work on that I can show off:
I've decided to work with a higher resolution for this texture, this time around and I've got all my base colours down so now it's just a case of sharpening this all up. Colour choice has been a bit tough tho and I might revise some of it based on the reference images.
I know it's been a while since the last WiP as progress has been slow and life has been busy but I've been able to get a bit more work on that I can show off:
I've decided to work with a higher resolution for this texture, this time around and I've got all my base colours down so now it's just a case of sharpening this all up. Colour choice has been a bit tough tho and I might revise some of it based on the reference images.
- Joined
- Jan 25, 2011
- Messages
- 2,386
I'm almost done, but I really don't feel going with this. This concept has already been in my mind since the contest started. (Seeing that there's no attempt on texturing the Shade. Well there should be one back then from another texturing contest but didn't finished it. I forgot who had attempted to texture it) Some screenies:
Front and back shots to show how the UV is being recycled in certain parts.
An upclose, detailed shot of the face.
A portrait shot (in war3 model viewer)
I am still arguing with myself if I should change the arm design, I had so many reiterations as that the UV for that part is recycled for the back part (Mountain Giant texture flashbacks, MG is still worse though). Aaaand, I am still thinking if I should do a gradient TC for the spikes, the eye color will remain as it is.
However, I might change models if I get frustrated lol.
Front and back shots to show how the UV is being recycled in certain parts.
An upclose, detailed shot of the face.
A portrait shot (in war3 model viewer)
I am still arguing with myself if I should change the arm design, I had so many reiterations as that the UV for that part is recycled for the back part (Mountain Giant texture flashbacks, MG is still worse though). Aaaand, I am still thinking if I should do a gradient TC for the spikes, the eye color will remain as it is.
However, I might change models if I get frustrated lol.
Last edited:
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 3,667
Now that is definitely an upgrade for the shade. That looks amazing!
- Joined
- Jan 25, 2011
- Messages
- 2,386
I just realized that my monitor color settings is fucked up. The color of my screenshots looked weird when viewed on my phone and/or work pc lol. Anyway, modified the contrast.
- Joined
- May 25, 2017
- Messages
- 740
My my, an actual elite Shade straight from the icon itself, kinda bummer that a little bit more blu could lead to maw shade territory. Anyway just incase a giant sand playing eredar gotta panik that i forgot this contest:
Just be patient, I still reading tons of books about boats logic and gears with horde boatcrafting technique. It's funny how the entire duration this contest, i make probably 3 skins (technically 2 because my mech is from June), talk about I couldn't take it serious
.
Here's a thing about 1024 ratio size, I can bet you probably cannot get any folk download your skin at that size, even take filesize out of equal. Unless your unit scaled in 10.00x, it's much rather just get 2 skins or resources instead of 1 fat texture. This is a hard fact that even delusionals gotta agree.
The only time i feel like 1024 make sense is your texture a rectangular (256x516), it's not fair for rec so upscaled them is fine.
Just be patient, I still reading tons of books about boats logic and gears with horde boatcrafting technique. It's funny how the entire duration this contest, i make probably 3 skins (technically 2 because my mech is from June), talk about I couldn't take it serious
.Here's a thing about 1024 ratio size, I can bet you probably cannot get any folk download your skin at that size, even take filesize out of equal. Unless your unit scaled in 10.00x, it's much rather just get 2 skins or resources instead of 1 fat texture. This is a hard fact that even delusionals gotta agree.
The only time i feel like 1024 make sense is your texture a rectangular (256x516), it's not fair for rec so upscaled them is fine.
- Joined
- May 7, 2016
- Messages
- 2,175
First WIP.
- Joined
- May 25, 2017
- Messages
- 740
Hey Gentlemen, how's yah doin recently?
I'm still building this boat from scratch at least to satisfy their "100% freehand" so what this boat is currently an HD-fied Orc Destroyer.
Wishing your best with more than one week deadline. @Arowanna Do you have any news catching by for your WC2 Deathwing long lost cousins?
I'm still building this boat from scratch at least to satisfy their "100% freehand" so what this boat is currently an HD-fied Orc Destroyer.
Wishing your best with more than one week deadline. @Arowanna Do you have any news catching by for your WC2 Deathwing long lost cousins?
- Joined
- May 7, 2016
- Messages
- 2,175
Orc nipples...
I just realized that the axe doesn't support alpha channel, so like the original it'll be ugly as hell
And there's a 'thing' right above the nose which shares the same wrap as the 'horns', it doesn't support alpha channel as well...
I prefered to to be able to entirely remove the helmet. Still, we'll see how I manage this.
Last edited:
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 3,667
WiP #3
Here's another WiP just to keep some interest in the contest going. I've gotten the largest part of the texture now finished and it's just the small finicky bits left to do, going for 512 x 512 was definitely a smart decision. Also I think it is now obvious what I am aiming for with my Final Form. This is High Magus Medivh, Medivh at his peak as the Last Guardian of Tirisfal, greatest mage on Azeroth and most powerful being and protector of the mortal races.
Here's another WiP just to keep some interest in the contest going. I've gotten the largest part of the texture now finished and it's just the small finicky bits left to do, going for 512 x 512 was definitely a smart decision. Also I think it is now obvious what I am aiming for with my Final Form. This is High Magus Medivh, Medivh at his peak as the Last Guardian of Tirisfal, greatest mage on Azeroth and most powerful being and protector of the mortal races.
- Joined
- Jun 25, 2008
- Messages
- 2,348
here is my entry, it is a WIP but I wanted to do something that I can actually use later so I wanted to make the Avenging Assassin from the icon (which I use in my map), I'm using the skins from other authors as a reference for the mesh (which I'm still exploring anyways), as you know with me, focus is on making the face look nice, also I just increased the size to 512, so I will have to remake the face, but no problem.
It is going to look something close to this:
It is going to look something close to this:
- Joined
- May 25, 2017
- Messages
- 740
Nope, sorry for pop the bubble that i'm not done yet. No background is just fancy 0% magic wand here.
Afterall, no matter how fancy you become, you are what you are. Still figuring out what can I go from here, I'm overhere think what is the name am I gotta put? At least Footman found a fitting name for his medivh.
- Joined
- May 7, 2016
- Messages
- 2,175
Almost done.
- Joined
- May 25, 2017
- Messages
- 740
It seem like I got my first finish seat here. Not that I am on hurry or something but it's something I can have some pride that I rode this boat just to give it a journey of growths.
You know the drill about this tabs, this is where I explain my entry for not just the viewer but to the my fellow contestants.
Prior looking over mechanical units, I was considered for something like Pit Lord because you can have the ultimate four legging overlord. But that wrap is not something for me to discover this early. So does for Eredars, Mountain Giants and even Lobstrokks.
While all options upthere are good, the theme itself suffer a flaw that Final Form/Elite is telling me to took that unit in their strongest form. Why yes, mind if I turn MG into a block of diamond? Lobstrokk become King Lobstrokk? Honestly, I make like 25 skins by now and I want all category here. So that's where mechanical units came in.
Yes, I am dippin with barefeet because I am not good at metalwork so picking them is a risk. But then again, I literally make a mech made out of ObsidianStatue so by default, I kinda forced to learn new stuffs.
This is where I dip even further, I was thinking of ships because they can have so much freedom on how would you make them in their strongest form. Obviously, Human Battleship and UD Battleship were the first ships came in mind but I literally got ALPHA (UD), Tongueless (NE) and tons of human like skins so yeah... Orc Ships was the way to go because cycling them help me feel fresh.
Which is tragic for Orc because their Destroyer/Frigate is the only unique boat but hey, I can turn their sad upside down so move on to Ideas.
In the Skin Section, Ship is literally ancient. Like the last approved one was 2016, 7 years my friend, no one would ever dip their feet in the ocean with a floating vehicle. Now... you got me. So the first thing is searching around Orc Ships which lead me to Horde Navy, after doing some research on material, I grab the Destroyer and the UV wrap to work.
The wrap isn't that bad but probably stressed when work with this because there is a lot of component and I couldn't start on scratch easily. So I detach each components and work step by step by fulfilling the 100% freehand rules. After rebuilding the ship with my style on it, I have to craft some metal that recently experienced from Alpha. Yes, I gotta point out that Horde Navy is unofficial on how Horde ship work because most the image I see maybe from the AU with the Iron Horde, I would just take it with a pinch of salt and logic.
After that, I armored this ship up with details, clean up arsenals and more woodcrafts which later replace with metal because duh, resist getting sunk and meeting the nagas. This is where the wrap screw me up because the lower part of the ship was quite a rollercoaster to do, I did my best with my skills because I have another goal for this ship.
You see, I don't want to make a texture look way too unfamilar to the original for this theme. I was sincerely give anything worth being familar to the lower counterpart. I could turn that MG into diamond but that won't make me recognize "Mountain Giant" and it's an entirely different unit that I didn't start with it. Hell this is like Goku final form would turn something that make him look like Vegeta which is no longer a final form but just outright replacement.
If you wish to continue treat them as a different unit, that's fine. But keep them at least familar to each other, You can talk crap about swordman is just footman but wings helmet but it's still related in appearance wise and role wise.
So I didn't fully replace every parts of the ship because I retain some familar because we start here and end there. That's intentional even if this lead me not to win this contest (which i doubt I care this time after I have my own drama). I would care to see this ship sail to as much map makers who have care in naval because trust me, you haven't seen ship skins for a while.
With that, I have concluded with my work and called this:
Ever heard of a melee ship? I think this one will fit to ram even the largest cruiser in Azeroth. As long you can make Jaina shiver me timber for my sake.
Overview
Models
Ideas
Final Form?
Conclusion and Final Entry
You know the drill about this tabs, this is where I explain my entry for not just the viewer but to the my fellow contestants.
Prior looking over mechanical units, I was considered for something like Pit Lord because you can have the ultimate four legging overlord. But that wrap is not something for me to discover this early. So does for Eredars, Mountain Giants and even Lobstrokks.
While all options upthere are good, the theme itself suffer a flaw that Final Form/Elite is telling me to took that unit in their strongest form. Why yes, mind if I turn MG into a block of diamond? Lobstrokk become King Lobstrokk? Honestly, I make like 25 skins by now and I want all category here. So that's where mechanical units came in.
Yes, I am dippin with barefeet because I am not good at metalwork so picking them is a risk. But then again, I literally make a mech made out of ObsidianStatue so by default, I kinda forced to learn new stuffs.
This is where I dip even further, I was thinking of ships because they can have so much freedom on how would you make them in their strongest form. Obviously, Human Battleship and UD Battleship were the first ships came in mind but I literally got ALPHA (UD), Tongueless (NE) and tons of human like skins so yeah... Orc Ships was the way to go because cycling them help me feel fresh.
Which is tragic for Orc because their Destroyer/Frigate is the only unique boat but hey, I can turn their sad upside down so move on to Ideas.
In the Skin Section, Ship is literally ancient. Like the last approved one was 2016, 7 years my friend, no one would ever dip their feet in the ocean with a floating vehicle. Now... you got me. So the first thing is searching around Orc Ships which lead me to Horde Navy, after doing some research on material, I grab the Destroyer and the UV wrap to work.
The wrap isn't that bad but probably stressed when work with this because there is a lot of component and I couldn't start on scratch easily. So I detach each components and work step by step by fulfilling the 100% freehand rules. After rebuilding the ship with my style on it, I have to craft some metal that recently experienced from Alpha. Yes, I gotta point out that Horde Navy is unofficial on how Horde ship work because most the image I see maybe from the AU with the Iron Horde, I would just take it with a pinch of salt and logic.
After that, I armored this ship up with details, clean up arsenals and more woodcrafts which later replace with metal because duh, resist getting sunk and meeting the nagas. This is where the wrap screw me up because the lower part of the ship was quite a rollercoaster to do, I did my best with my skills because I have another goal for this ship.
You see, I don't want to make a texture look way too unfamilar to the original for this theme. I was sincerely give anything worth being familar to the lower counterpart. I could turn that MG into diamond but that won't make me recognize "Mountain Giant" and it's an entirely different unit that I didn't start with it. Hell this is like Goku final form would turn something that make him look like Vegeta which is no longer a final form but just outright replacement.
If you wish to continue treat them as a different unit, that's fine. But keep them at least familar to each other, You can talk crap about swordman is just footman but wings helmet but it's still related in appearance wise and role wise.
So I didn't fully replace every parts of the ship because I retain some familar because we start here and end there. That's intentional even if this lead me not to win this contest (which i doubt I care this time after I have my own drama). I would care to see this ship sail to as much map makers who have care in naval because trust me, you haven't seen ship skins for a while.
With that, I have concluded with my work and called this:
Ever heard of a melee ship? I think this one will fit to ram even the largest cruiser in Azeroth. As long you can make Jaina shiver me timber for my sake.
- Joined
- Jun 25, 2008
- Messages
- 2,348
update (mental note, that umbrella thing on her back just sh*ts all over the model)
- Joined
- Jan 25, 2011
- Messages
- 2,386
Amazing work, Yaser. Nice to see the very large improvement!
Good to see someone using that texture as a reference.
I don't know if I'll make it in time, I am currently out of town for a week.
Site Director
- Joined
- Jan 1, 2006
- Messages
- 3,152
Great WIPs gents!
We can grant an extension as per usual, for those who have shown a WIP before the deadline, but can't quite make it
We can grant an extension as per usual, for those who have shown a WIP before the deadline, but can't quite make it
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 3,667
I am aiming for the 23rd and have planned to be done by then so hopefully I wont need oneGreat WIPs gents!
We can grant an extension as per usual, for those who have shown a WIP before the deadline, but can't quite make it
but I appreciate the willingness to have one if others need it.
- Joined
- Jun 25, 2008
- Messages
- 2,348
I am aiming for the 23rd and have planned to be done by then so hopefully I wont need one
update, making the umbrella thing look like an actual umbrella is kinda a success, currently finishing exploring the arms mesh (it is a mess) before going with the rest of the body, at least I was able to make her hands look like well, hands, and have a fist on it when you look closely, now it needs a little bit more detail
**
update
Last edited:
- Joined
- May 7, 2016
- Messages
- 2,175
Last edited:
- Joined
- Jun 25, 2008
- Messages
- 2,348
update, almost done actually, but the mesh around the legs is kinda sht too, and the other skins had no idea about how to handle the legs or the crotch area, it took me a while to figure out how the mesh worked around that area
- Joined
- May 14, 2014
- Messages
- 919
i regret myself forgetting about this thing
i had to look up images of crustaceans, the carapace looks all wobbly but it should be looking ok
i had to look up images of crustaceans, the carapace looks all wobbly but it should be looking ok
Last edited:
- Joined
- Dec 30, 2007
- Messages
- 1,554
I took an extended holiday, and I don't really think I'll make it back in time. Best of luck to everyone!
- Joined
- May 14, 2014
- Messages
- 919
Idk if i could make it but its 90% complete, the only thing left is to revised few parts and the weapon
- Joined
- May 25, 2017
- Messages
- 740
In the spirits of competition, as much we have agreed this deadline. I want the ship sailed with the most quality crew as possible so perhap a week extension is required. I haven't raise the anchor yet so by now if they can, they would provide with their best arsenal.
So I have a slight thumb up for extension, Hey Prince @PrinceYaser , I know you are winning in monopoly but can you give them a shot to beat your 8k Ultra HD grunt.
So I have a slight thumb up for extension, Hey Prince @PrinceYaser , I know you are winning in monopoly
but can you give them a shot to beat your 8k Ultra HD grunt.
- Joined
- May 7, 2016
- Messages
- 2,175
I too will be more than happy to see all the entries finished.
Nothing is certain yet. xDHey Prince @PrinceYaser , I know you are winning in monopoly
- Joined
- Mar 10, 2013
- Messages
- 106
- Joined
- Jun 25, 2008
- Messages
- 2,348
Crotch mesh is geting weirder every time, I had to change the shape a lot so that it looks nice on the skin, I guess I can finish it today
I also changed the fist a bit, and took some guidelines from the OG base skin to make the fists look better
The hand looks like, well, a hand, that's a lot in WC3
I also changed the fist a bit, and took some guidelines from the OG base skin to make the fists look better
The hand looks like, well, a hand, that's a lot in WC3
Site Director
- Joined
- Jan 1, 2006
- Messages
- 3,152
The deadline has been extended by two weeks.
@TheZodiarch please post some WIP (work in progress). You need to do this in order to enter the contest. See the first post for rules and guidelines.
@TheZodiarch please post some WIP (work in progress). You need to do this in order to enter the contest. See the first post for rules and guidelines.
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 3,667
Oh thank god, I've been out with the flu since I got back from my holiday at the weekend which had destroyed the two days I'd set aside to work on this, I was literally forcing myself to get it finished right as you posted this lol.
- Joined
- Mar 10, 2013
- Messages
- 106
Same man... totally forgot I had an appointment with a dentist with my family and wasted hours there. Not to mention we are working on changing him for another, what a scammer that one.
Anyway... here are some WIPs
Attachments
- Joined
- May 7, 2016
- Messages
- 2,175
3DCoat? I'd suggest removing the 3D Grid from the View section. It's better that way.
Last edited:
- Joined
- May 25, 2017
- Messages
- 740
Extension happened, man this contest give you too many vacation trips than schools can give you, talk about i'm starting to miss Footman review here.
Well, I'm not gotta make any more change here not to upset past downloaders. I can gladly give myself sleep all day long babe.
Well, I'm not gotta make any more change here not to upset past downloaders. I can gladly give myself sleep all day long babe.
- Joined
- Dec 8, 2008
- Messages
- 4,375
I can judge, no time for participating.
- Joined
- Jul 28, 2021
- Messages
- 804
I will elitify Inernals and Ents, just watch.
- Joined
- May 25, 2017
- Messages
- 740
With your modeling skill boi?
Nah, you be dipping them in new coating, son.But god bless you would do Ents over Infernal because.... I already been there.
Last edited:
- Joined
- Jul 28, 2021
- Messages
- 804
Partially.With your modeling skill boi?
But god bless you would do Ents over Infernal because.... I already been there.
With a few exterior changes you can make them look like an intermediary between a Treeant and their prime form of Ancients.
Last edited:
- Joined
- Mar 10, 2013
- Messages
- 106
First time using it, thanks :,D
- Joined
- May 25, 2017
- Messages
- 740
Oh oh. Guys, 3 days left and any news from the progress?
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 3,667
Grand Magus Medivh
www.hiveworkshop.com
Here is my entry, Grand Magus Medivh! The most powerful mage to ever walk Azeroth now finally looks the part as the Last Guardian!
- Joined
- Apr 24, 2012
- Messages
- 9,802
- Joined
- Jun 25, 2008
- Messages
- 2,348
- Joined
- Mar 10, 2013
- Messages
- 106
- Joined
- Apr 24, 2012
- Messages
- 9,802
Site Director
- Joined
- Jan 1, 2006
- Messages
- 3,152
@Darkfang @Draktar @Vinz @Villagerino @Wildfire What's the status?
@Shido I will create a new TC #33 theme discussion thread ASAP
@PROXY thanks for wanting to help judging! Do we have another? We need at least two judges.
@TheZodiarch You need to post some WIP (work in progress) images in order to enter the contest. Like I stated in our other conversation. Are you able to do this?
@Shido I will create a new TC #33 theme discussion thread ASAP
@PROXY thanks for wanting to help judging! Do we have another? We need at least two judges.
@TheZodiarch You need to post some WIP (work in progress) images in order to enter the contest. Like I stated in our other conversation. Are you able to do this?
- Status
