• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Simple Model Workshop

Status
Not open for further replies.
Level 8
Joined
Feb 6, 2013
Messages
432
Thank you so much!! The model is very nice. :D :D
But can I request more model than one? :)
 

Attachments

  • asdf.PNG
    asdf.PNG
    29.8 KB · Views: 131
Level 8
Joined
Feb 6, 2013
Messages
432
I don't really get it, more altar models? Or more requests? If so just request away

Thank you. But now it isn't an altar. I need a water dragon. :) It's base on Phoenix model.
EDIT: Like this: (Once again I talk i used Adobe Photoshop!!)
 

Attachments

  • asdf.PNG
    asdf.PNG
    29.1 KB · Views: 209
Level 12
Joined
May 12, 2012
Messages
631
Ugh! The phoenix :ogre_rage:

I'm really sorry dude but I can't edit the phoenix because it does not have a texture of it's own so I don't know which is which, I would recommend posting this on the request forum itself for help or ask J.H. (Jesus Hipster) for help becuase he is the one who made a dark phoenix request here :ogre_haosis:
 
Level 20
Joined
Apr 14, 2012
Messages
2,901
Ugh! The phoenix :ogre_rage:

I'm really sorry dude but I can't edit the phoenix because it does not have a texture of it's own so I don't know which is which, I would recommend posting this on the request forum itself for help or ask J.H. (Jesus Hipster) for help becuase he is the one who made a dark phoenix request here :ogre_haosis:

That's true. JH made my nether drake-skinned phoenix...
 
Level 12
Joined
Jun 2, 2012
Messages
715
Hello again, I tested a portrait, you did for me, but it did not work as it was to be, anyway, I was wondering if you have to pick up the Portrait of the Swordsman and the Lieutenant, and edit their eyes to look like models, you can do this for me?


Thanks for the help!
 
Hey, Zyne. I started following through your Model Workshop, and I was struck by how I might be able to help here or there. There were a couple of situations where you said there were requests you could not do, and where I thought I might have been able to do them.

I'm very busy with life away from Warcraft, but I tend to have time on the weekends. So, if you would like to, feel free to forward any requests to me when you run into things that you don't know how to do. I've spent an awfully long time learning MDL editing; when I make a model, I try to tell myself that nothing is impossible, but I work very slowly.

Just a thought that I had while following through your workshop. Either way, it looks like you're doing some good work. :)
 
Level 20
Joined
Apr 14, 2012
Messages
2,901
Hey, Zyne. I started following through your Model Workshop, and I was struck by how I might be able to help here or there. There were a couple of situations where you said there were requests you could not do, and where I thought I might have been able to do them.

I'm very busy with life away from Warcraft, but I tend to have time on the weekends. So, if you would like to, feel free to forward any requests to me when you run into things that you don't know how to do. I've spent an awfully long time learning MDL editing; when I make a model, I try to tell myself that nothing is impossible, but I work very slowly.

Just a thought that I had while following through your workshop. Either way, it looks like you're doing some good work. :)

Wow... I'm not Zyne but if another one joins the team I think all of us would appreciate it =D
 
Level 12
Joined
May 12, 2012
Messages
631
Hey, Zyne. I started following through your Model Workshop, and I was struck by how I might be able to help here or there. There were a couple of situations where you said there were requests you could not do, and where I thought I might have been able to do them.

I'm very busy with life away from Warcraft, but I tend to have time on the weekends. So, if you would like to, feel free to forward any requests to me when you run into things that you don't know how to do. I've spent an awfully long time learning MDL editing; when I make a model, I try to tell myself that nothing is impossible, but I work very slowly.

Just a thought that I had while following through your workshop. Either way, it looks like you're doing some good work. :)
the creator of the tool Im using wants to join my team :ogre_rage: I'm honored :grin:
sure you can join the workshop, can you start with the ones I can't do right now? (reviews :grin:)

offtopic: wondering when you may be able to finish the geoset deleter tool in Matrix Eater :grin:
 
Frankly, I'm honored you like the tool :)

While at school today, I spent some spare time on my laptop making some water dragon models from the Phoenix. I'm not at home, and don't have my home computer / full arsenal of tools, but here's something.

Was the water dragon request still needed, or was it taken elsewhere?

Edit: The one of the left has the water elemental's animated texture.

Edit: I was sitting around after school to study and made a winged lich king with arthas's sword too, it'll be attached below. I made it from the lich king model referenced earlier in this thread, and without any permission to edit the model beyond permission to edit it earlier in the thread? I hope that permission for the other edit was sufficient?
 

Attachments

  • WaterDragons.png
    WaterDragons.png
    76.7 KB · Views: 275
  • WaterDragon.mdx
    132.6 KB · Views: 84
  • WaterDragonCold.mdx
    130.8 KB · Views: 87
  • WingedKing.zip
    347.1 KB · Views: 99
  • wingedKing.png
    wingedKing.png
    603.9 KB · Views: 466
Last edited:
Level 20
Joined
Apr 14, 2012
Messages
2,901
Frankly, I'm honored you like the tool :)

While at school today, I spent some spare time on my laptop making some water dragon models from the Phoenix. I'm not at home, and don't have my home computer / full arsenal of tools, but here's something.

Was the water dragon request still needed, or was it taken elsewhere?

Edit: The one of the left has the water elemental's animated texture.

Edit: I was sitting around after school to study and made a winged lich king with arthas's sword too, it'll be attached below. I made it from the lich king model referenced earlier in this thread, and without any permission to edit the model beyond permission to edit it earlier in the thread? I hope that permission for the other edit was sufficient?

Thanks a Retera! You certainly are a great modeler! (One of the best I know now)

EDIT: Retera, Do you do models from scratch or edit default models for those to look like models from a reference picture(s)?
 
I'd be happy to edit default models to try to make a reference picture, but my skill in making models truly from scratch probably leaves something to be desired. I seem to recall that the last time I tried to make something from scratch, I ended up editing it as though it were a normal model anyway.

If you'd be willing to give a reference picture, I'd be happy to try to make whatever it is, although I like to recycle Blizzard's art as much as possible.

Also, I sort of wish I had made better documentation on the MatrixEater. For example, the water elemental animated texture on that phoenix was literally like... one click. It just had to be the correct click in the horribly complicated interface (see picture). Also, the program crashed when it tried to handle the animated texture, so I had to update it. I should post that update soon.
 

Attachments

  • MatrixEaterImport.png
    MatrixEaterImport.png
    46.4 KB · Views: 146
Level 8
Joined
Feb 6, 2013
Messages
432
I backed!
Thank you so much to Retera, the Water Dragon model is very nice! ^^
I thanks to all of modellers. Then I will credits both of you! :D
 
Level 8
Joined
Jul 18, 2010
Messages
332
I'm not sure if you can make me this model but I'll give it a shot again anyway. I'm requesting a model that somewhat looks like a golden god-like humanoid entity. There's the picture below. I'm going to use it as the final boss for my map. I'm not really asking anybody to make it look as accurate as possible but maybe you could base it off the cinematic Kil'jaeden because it floats and just turn it to gold, remove the cloud, the cape, and the tail. That will be fine for me. Too bad that model doesn't have much animation so I'm not sure which model you could base it from. I would need it to have a channelling and a spell animation(These two are optional). Thanks in advance.

Secret_Project_Achemedia_Final_Monster_09.png


Here's a video of the model I'm talking about. It's on the last minutes of the video.

Another request, I hope someone can do both of these requests for me.
Here's a picture below. It looks like a sphinx.
Immortal_Barahkufu.png


I was thinking you could base it off the model Centaur Khan and just turn it to gold and red. It's okay if you don't give it wings, I'll take care of that. And this model floats so it would be great if it had the sorceress floating animation.

This is another request.

Nobody could make me the wings for the GOD Model so can someone do it for me? These are wings that Wandering Soul made for me back then. I would want it to be shiny golden. And instead of being attached to the chest, I would want it to be either an origin or an overhead attachment so it wouldn't follow the unit's movement. And make it 2.5x to 3x the size of the original wings. And make it float up and down if possible. Thanks in advance.

www.hiveworkshop.com/forums/requests-341/god-model-sphinx-model-request-233396/
 
I felt kind of inspired to start with that Sphinx model. I basically just reskinned the Destroyer Form of the Obsidian Statue and gave it pit lord animations. And, the reskin mostly consisted of copying bits and pieces of that image you posted onto the Destroyer's skin. But, I guess it's looking pretty good.

I think there's still more I should do to it before I call it done, but here's a WIP image. Feel free to make any comments you want. Right now, the weapons are just copied off of the Naga Siren and resized mostly.

The bad new is that I haven't been focused on real life enough today, so I probably should do more of that.
 

Attachments

  • SphinxWIP2.png
    SphinxWIP2.png
    388.2 KB · Views: 578
Level 20
Joined
Apr 14, 2012
Messages
2,901
I felt kind of inspired to start with that Sphinx model. I basically just reskinned the Destroyer Form of the Obsidian Statue and gave it pit lord animations. And, the reskin mostly consisted of copying bits and pieces of that image you posted onto the Destroyer's skin. But, I guess it's looking pretty good.

I think there's still more I should do to it before I call it done, but here's a WIP image. Feel free to make any comments you want. Right now, the weapons are just copied off of the Naga Siren and resized mostly.

The bad new is that I haven't been focused on real life enough today, so I probably should do more of that.

Nice skinning skills dude... I'm impressed.
 
Level 8
Joined
Jul 18, 2010
Messages
332
Wow, that looks great. It does look impressive.
Using the destroyer form is a great idea, never really thought of that.
I just have one stupid question, is that just a skin or a model?
I think it would be better if it will replace the original destroyer form skin since I ain't using that model anyway.

If you can't do the wings well, you can remove it if you want cause I have a wonderful wing model already which I could just attach. It's on the link to my request thread I gave.

Thank you very much.
 
The Sphinx thing that I made yesterday is a model (I'll attach it so that you can take a look) -- that's how I added the blade weapons and different shaped headpiece. But, because I wrapped it around pitlord animations with the Matrix Eater, it doesn't float quite like you were hoping, so I may do some more animation work on it sometime soon. I should be able to take the Matrix Eater and import the sorceress float twice over onto both sets of its legs, or something like that. I could also try to put back the Destroyer-style leg animations. I happen to still have a copy of the Destroyer's original model that uses that skin, so I'll attach it too if you want it.

As for that axe, I guess I'd say you could plan on it being done by Sunday at the latest, just based on the fact that I'll do it one of these next few days. I may start on it today, if I have time, but I might not have time, etc.
 

Attachments

  • BrightSphinx.blp
    98.1 KB · Views: 98
  • GreatSphinx2.mdx
    278.5 KB · Views: 112
  • ObsidianStatueSkinned.mdx
    263.3 KB · Views: 101
Level 12
Joined
May 12, 2012
Messages
631
I just had a thought about your axe request, when I look at the axe of Hellscream it looks similar somehow and I think the a rune of warcraft can be used there and color it orange, will try it lol (so it doesn't looks like I'm relying it all to Retera >___<)
 
Level 20
Joined
Apr 14, 2012
Messages
2,901
I just had a thought about your axe request, when I look at the axe of Hellscream it looks similar somehow and I think the a rune of warcraft can be used there and color it orange, will try it lol (so it doesn't looks like I'm relying it all to Retera >___<)

It doesn't seem like that at all. I know your busy with life and Retera just wants to help real fast.

Now that I think of it, it does resemble Hellscream's axe... I'm counting on you Zyne. Don't let me and the people of this Model Workshop down =)

Remember now, it's just not for me, but for the people too.
 
Level 8
Joined
Jul 18, 2010
Messages
332
Thanks for the Sphinx Retera. If anybody got time for my other two requests, I'll be needing your help too.

Here's my other two request:
A golden version of Cinematic Kil'jaeden or whatever model close to his god-like pose and aura. Remove the tail, cape, and, the cloud.

A golden version of this set of wings. Base it off something that floats and make it an appropiate attachment for an overhead or an origin attachment.

EDIT: Retera, I liked the obsidianstatue more than the great sphinx but can you please remove its wings, I have a better set of wings with me. And can you please replace its weapon with the weapon that you gave to the great sphinx model. Thanks in advance.
 

Attachments

  • Tsubasa.blp
    39.8 KB · Views: 170
  • Tsubasa_White_squished.mdx
    11.8 KB · Views: 132
Last edited:
Today I'm messing with my main computer workstation, which has ceased to boot windows. However, that seems entirely within the realm of what I should be able to either on my school laptop or when I get this computer fixed. The Matrix Eater can import Spell Effects (like any model) and I would imagine I could import the phoenix missiles onto the orbit-bones of something like Chimaera acid (I'm on Linux on this dead machine atm, but I seem to recall that chimaera acid had a spinning part of its art? I can import that spin, or something similar, etc..)

Edit: and those orbit bones + phoenix missiles could be imported on Sky-Fury missile (it should all work)
 
Level 20
Joined
Apr 14, 2012
Messages
2,901
Today I'm messing with my main computer workstation, which has ceased to boot windows. However, that seems entirely within the realm of what I should be able to either on my school laptop or when I get this computer fixed. The Matrix Eater can import Spell Effects (like any model) and I would imagine I could import the phoenix missiles onto the orbit-bones of something like Chimaera acid (I'm on Linux on this dead machine atm, but I seem to recall that chimaera acid had a spinning part of its art? I can import that spin, or something similar, etc..)

Edit: and those orbit bones + phoenix missiles could be imported on Sky-Fury missile (it should all work)

Thanks so much! If I knew anything about modeling (sufficient knowledge to help you) I would help you and Zyne; but alas, at the moment I could only resize models.
 
Status
Not open for further replies.
Top