Mister_Haudrauf's Self-made Wip Model Gallery

[Mister_Haudrauf]

Firstly this thread was made to show you the progress of specific models that i am going to make with the Tool Milkshape3d. Be aware that it will take a while for such models to be made. So be patient.

1.Models that are scratch-made and that i will upload.

Spoiler: Gorloc Wip

Milkshape3d Modeling

Spoiler: Very Early 1

As you can see it's only the foot and the beginnings of the leg of it. Not much yet.

Spoiler: Very Early 2

Now there are two legs instead of one. Also there is the beginning of the Torso.

Spoiler: Early 1

Now it's getting interresting. The Torso is almost complete and the Arms/Hands are there too. Also there is a Tail.

Spoiler: Early 2

I begin to shape the Head. You can already see the teeth along with a weird limp that is attached to is mouth.

Spoiler: Early 3

Now you can see an ear along with the shape of the Eye.

Spoiler: Early 4

This is not the final model, but it is almost finished.

Spoiler: Final

This is the final model. I will have 'fun' texturing this.....

Texturing

Spoiler: WIP 2 Texturing 1

Well this is the beginning of a colorful 'friendship'. I am using the Standard Murloc texture.

Spoiler: WIP 2 Texturing 2

If you ask me it's kind of 'wrong'. Using the Standard Murloc texture.

Spoiler: WIP 2 Texturing 3

Thank's to @Heinvers' advice/help. I am using now different textures. They are now fitting more.

Spoiler: WIP 2 Texturing 4

The wrapping of the Texture is not finished, but you can see the tongue.

Spoiler: WIP 2 Texturing Final

I changed the wrapping of the arms a bit. Also by the Way: THE WRAPPING IS FINISHED!

Bone placing and 'animating' (Not sure)

Spoiler: WIP 3 Animating Preview

As you can see i have made a 'Stand Swin'-Animation. So with this Picture i confirm that the model is able to swim.

Gorloc-Model found here

Spoiler: Lynel WIP

Milkshape3d Modeling

Spoiler: Early 1 -> 4

In the first three Pictures. You can see the forming of the Body and in the last you can see that i colored the different portions of the Body to ease the modeling of the hair a bit.

Spoiler: Early 1

Spoiler: Early 2

Spoiler: Early 3

Spoiler: Early 4

Spoiler: Late Early 1 -> 3

These pictures are taken from the same version, but from different perspectives.

Texturing

Spoiler: Early 1 -> 3

These pictures are taken from the same version, but from different perspectives. Just so you know i have chosen white hair so that i can color it differently later on.

Spoiler: Late Early 1 -> 3

These pictures are taken from the same version, but from different perspectives. So yeah the Texture is final. The Only thing i will change is the Hair Color, Eye Color and Body texture for the Other Versions.

Spoiler: Final 1 -> 3

These pictures are taken from the same version, but from different perspectives. These Weapons you see here are premade. Yes you heard right 'Premade'. I made these Weapons before i made the model. Also they are not his only weapons. I gonna make another two Versions of the model: One with a Spear and no shield and one with a Club/Crusher and no shield.

Lynel Model found here

Spoiler: Quilboar Building-Set

Quilboar Building-Set link here

Spoiler: Tagar Spinebreaker WIP

Milkshape3d Modeling

Spoiler: WIP 1 -> 2

Texturing

Spoiler: WIP 1 -> Final

2.Models that i made, because i was bored.

Spoiler: Models made, because i was bored

Spoiler: Gravestone

Spoiler: WIP

Spoiler: Model

Spoiler: Tomb

Spoiler: WIP

Spoiler: Model

Spoiler: Majora's Mask

Spoiler: WIP

If you have any Questions regarding this Gallery or the Models (that are going to be made), then don't hesitate and ask straight away.

 

[Cuore]

Nice

What do you like of ms3d, in comparison to other software, e.g. 3dsM?

could you describe the steps you take to develop a limb, for example a leg?

 

[Mister_Haudrauf]

Nice

What do you like of ms3d, in comparison to other software, e.g. 3dsM?

could you describe the steps you take to develop a limb, for example a leg?

1. It is the only one i have that i can make models from scratch with and it is pretty easy to handle, if you have watched the tutorials.

2.Well.... I can't really describe it easily. I can only say this look at your own limps and imagine: How would your limp look in the Program, that you going to use. And then simply make it.

Or if it's a fantasy creature then i recommend to look at reference pictures.

 

[Mister_Haudrauf]

Here is a small Update on the WIPs of the Gorloc.

Spoiler: Early 2

I begin to shape the Head. You can already see the teeth along with a weird limp that is attached to is mouth.

Spoiler: Early 3

Now you can see an ear along with the shape of the Eye.

Spoiler: Early 4

undefined

 

[Mister_Haudrauf]

Another Update. This time Major for the Gorloc.

Spoiler: Final

This is the final model. I will have 'fun' texturing this.....

Texturing

Spoiler: WIP 2 Texturing 1

Well this is the beginning of a colorful 'friendship'. I am using the Standard Murloc texture.

Spoiler: WIP 2 Texturing 2

If you ask me it's kind of 'wrong'. Using the Standard Murloc texture.

Spoiler: WIP 2 Texturing 3

Thank's to @Heinvers' advice/help. I am using now different textures. They are now fitting more.

Spoiler: WIP 2 Texturing 4

The wrapping of the Texture is not finished, but you can see the tongue.

Spoiler: WIP 2 Texturing Final

undefined

 

[Cuore]

This is looking very good!
I have a constructive suggestion on this. I have made minor image edits to illustrate what I propose:
1 spread out the claws a little bit

2 make the legs a little thicker

My opinion is that this would make the gorloc look more frog-like and murlocky

 

[Mister_Haudrauf]

This is looking very good!
I have a constructive suggestion on this. I have made minor image edits to illustrate what I propose:
1 spread out the claws a little bit
View attachment 269770

2 make the legs a little thicker
View attachment 269771

My opinion is that this would make the gorloc look more frog-like and murlocky

It's a good suggestion. I will consider it.

 

[UmbraUnda]

oh my - DAYEMmm. You really know how to model - excellent job. I might use these in my Dark Souls inspired map.

 

[Mister_Haudrauf]

oh my - DAYEMmm. You really know how to model - excellent job. I might use these in my Dark Souls inspired map.

Yeah i know. I am currently in the progress of placing the bones and then probaly animate them or i ask someone else, if i don't have time.

Also there will be more models in the future. I am currently only paying attention to this and "make it great".

 

[UmbraUnda]

Yeah i know. I am currently in the progress of placing the bones and then probaly animate them or i ask someone else, if i don't have time.

Also there will be more models in the future. I am currently only paying attention to this and "make it great".

alright mate, keep up the good work.

 

[Heinvers]

This took a good turn so far.

 

[Mister_Haudrauf]

This took a good turn so far.

Yeah i agree. I am currently animating the model.

Question: I don't play Wow so much and i want to question how the Gorloc attacks. Does it attack with his teeth?

 

[Chen]

I think they use teeth. I think the head could be a lot bigger, kinda like a frog. Have you tried using the Altar of Depths texture btw? I recall gorlocs to be brown colored, but also have blue ang green variations.

Buuut good job so far, I'm excited to see how animations would look like

 

[Mister_Haudrauf]

I think they use teeth. I think the head could be a lot bigger, kinda like a frog. Have you tried using the Altar of Depths texture btw? I recall gorlocs to be brown colored, but also have blue ang green variations.

Buuut good job so far, I'm excited to see how animations would look like

I can already say, that i am not really good in making Walk-animations.

Buuut with the Walk animation. I have already four done so far.

 

[Mister_Haudrauf]

Well another update.

Bone placing and 'animating' (Not sure)

Spoiler: WIP 3 Animating Preview

undefined

Not much to see. Aside from the bones and the animation.

At this Point i have the following animations done:
Stand - 1
Stand - 2
Stand - 3
Stand Swim - 1
Stand Ready
Walk
Attack - 1

 

[Mister_Haudrauf]

The Gorloc is finally finished and uploaded.

Gorloc-Model found here

 

[Kyrbi0]

Good stuff!

 

[Sir Fleymark]

I like your model, very original

 

[Mister_Haudrauf]

I started to stratch-model a new model. This time it's the Lynel.

Spoiler: Lynel WIP

P.s. I know that in the last picture the Head looks a bit similar to Sageras' head with the horns, but this has nothing to do with the Model i currently am working on.

 

[Mister_Haudrauf]

A new Update on the progress of the Lynel.

Spoiler: Late Early 1 -> 3

These pictures are taken from the same version, but from different perspectives.

Texturing

 

[FerSZ]

Lynel looks good, I think mane could be a bit bigger, also lower limbs a bit thicker.

 

[Mister_Haudrauf]

Texturing

Spoiler: Early 1 -> 3

undefined

Another Update for the Lynel. This it's texturing.

Lynel looks good, I think mane could be a bit bigger, also lower limbs a bit thicker.

What do you mean with 'lower limbs'?

 

[Cuore]

@Mr the lower limbs are the legs.

 

[Mister_Haudrauf]

Spoiler: Late Early 1 -> 3Final 1 -> 3

Spoiler: Late Early 1 -> 3 These pictures are taken from the same version, but from different perspectives. So yeah the Texture is final. The Only thing i will change is the Hair Color, Eye Color and Body texture for the Other Versions.

Spoiler: Final 1 -> 3 These pictures are taken from the same version, but from different perspectives. These Weapons you see here are premade. Yes you heard right 'Premade'. I made these Weapons before i made the model. Also they are not his only weapons. I gonna make another two Versions of the model: One with a Spear and no shield and one with a Club/Crusher and no shield.

Another Update for the Lynel.

Just so you know: I am probably gonna give him a bit more Armor.

 

[Mister_Haudrauf]

Lynel Model found here

I finally have finished the Lynel. I also made Variations of it. Many Variations.

 

[Mister_Haudrauf]

2.Models that i made, because i was bored.

Spoiler: Models made, because i was boredGravestone

Spoiler: Gravestone

Hey guys. Funnily enough i was bored and made a quick gravestone.

 

[Stefan.K]

Hey guys. Funnily enough i was bored and made a quick gravestone.

Very nice. But the cross texture is a little blurry and not fitting there. I think you should change it.

 

[Mister_Haudrauf]

Very nice. But the cross texture is a little blurry and not fitting there. I think you should change it.

Well i planned it to be part of a building. So the blurry part can be forgiven, but if someone really wants the Gravestone only then i can see what can be done.

 

[Mister_Haudrauf]

Spoiler: Tomb

Spoiler: WIP

Spoiler: Model

Again because i was bored i made a tomb. Again i think of including it in a bigger building like a Graveyard.

 

[Kyrbi0]

That's pretty solid.

 

[Mister_Haudrauf]

Spoiler: Quilboar Building-Set

Quilboar Building-Set link here

I am going to make a Quilboar Building-Set. But i use another Thread for this Discussion so please go to this Thread, if you want to share your Ideas.

 

[Mister_Haudrauf]

Spoiler: Majora's Mask

Spoiler: WIP

No this is not a heart. This is Majora's Mask without any texture. If someone wants to make a texture then please contact me.

 

[Mister_Haudrauf]

Spoiler: Tagar Spinebreaker WIPWIP 1 -> 2WIP 1 -> Final

Milkshape3d Modeling
Spoiler: WIP 1 -> 2

Texturing
Spoiler: WIP 1 -> Final

Believe it or not, but i decided to remake my old Tagar Spinebreaker from Scratch and with ingame textures.
That's also the reason why i didn't make anything for the quilboar buildings so much.

I just have to animate him. His class is a Warrior so he uses his axe most of the time. It's already bloodstained.

 

[stein123]

you really need to improve on the proportions

 

[Mister_Haudrauf]

you really need to improve on the proportions

Is the Head to small? Is the body too big? Is everything bad? Where is the need of improvement?

 

[stein123]

sure, I'll make a quick sketch when I get home, to illustrate what I mean :3

 

[Mister_Haudrauf]

sure, I'll make a quick sketch when I get home, to illustrate what I mean :3

Illustrations are the best way to show someone how something is done correctly.

I greatly appreciate your help in making the model better. I'll wait until the sketch is done, before i do anything else.

At least with this Model. I'll most likely continue making Quilboar buildings until then.

 

[stein123]

This is what i mean, a bit more compact, bulkier and shorter.


Off-topic: while i was doing that body sketch, i made a concept art for the character too XD:

 

[Mister_Haudrauf]

View attachment 275752
This is what i mean, a bit more compact, bulkier and shorter.


Off-topic: while i was doing that body sketch, i made a concept art for the character too XD:

View attachment 275753

So compact, bulkier and shorter. Okay i will try that.

Also nice concept. I llike it.

 

[Mister_Haudrauf]

@stein123
Okay. I have worked on the Proportions a bit.

Spoiler

On the far left is the old tagar.
In the middle is a Fel Orc Warlock, that i had on my Pc.
On the far right is the new tagar.

NOTE: The Eyes of both tagars are so red, because the red color was modulated. MDLvis can't display modulated textures so well.

 

[Kyrbi0]

Better, though still needs some work (head needs to be better seated on shoulders IMO).

@stein123 , stop being so awexome...

 

[Mister_Haudrauf]

Better, though still needs some work (head needs to be better seated on shoulders IMO).

I have already done that on the version that i have on Pc. I am sometimes looking at the Fel Orc Warlock Wow model for reference. Maybe i should do this for every Orc model that i make.

And looking at different references for each race in general.

@stein123 , stop being so awexome...

I know right.

 

[Stefan.K]

Spoiler

The proportions are not right again. I tried to give you a tip on how to improve it in the picture above. The head needs serious work.

And don't use wow models as your reference, use some from the Warcraft III.

 

[Mister_Haudrauf]

His look is referenced by this Image:

Spoiler: Tagar Spinebreaker

His handgloves aren't bulky like you illustrated @Stefan.K but i will improve the other things you have illustrated.

 

[Stefan.K]

His look is referenced by this Image:

Spoiler: Tagar Spinebreaker

His handgloves aren't bulky like you illustrated @Stefan.K but i will improve the other things you have illustrated.

I know they aren't, but if you take a look at Tauer's models you will see that he base his models on the same references as you do but he made them to fit into Warcraft 3. That's why I showed you this. To make it more fitting in game. I always wanted my models first to fit in game with the original models.

The more bulkier model looks the better it will fit in game, trust me. Just compare Tauer's Doomhammer model with this one of yours and you will see huge differences and they are both great warriors and are bulkier like any orc.