Problem with flying height and obstacles/cliff

[shadowvzs]

-added to unit crown form, removed it
-set unit flying height to 400

but i cant over the cliffs/trees....have anyway how to walk over the obstacles&cliffs with crown form trick?

 

[Maker]

Turn collision off for the unit?

Are you using move unit instantly or SetUnitX/Y?

 

[Hashjie]

What pathing do the cliffs and trees have?

 

[Adiktuz]

its just for setting fly height... if you want it to cross non-walkable things, you need to have the flying movement type... or turn off collision

 

[shadowvzs]

i used setunitposition without collision but with flying height after setunitposition (test unit was human peasant & priest)

i added colission still problem when i want go over the edge of cliff, the unit mostly stuck there and cant go over the cliff :/


@Has i will show the map, soon

 

[Adiktuz]

You would need to either use SetFlyHeight then SetUnitX/Y so that it won't check for collision until you issue ur unit to move or whatsoever, or use the fly movement type...

 

[shadowvzs]

You would need to either use SetFlyHeight then SetUnitX/Y so that it won't check for collision until you issue ur unit to move or whatsoever, or use the fly movement type...

i cant use fly movement type just add remove crown form,also my mian problem the cliff edge 's :/

u can check here https://www.hiveworkshop.com/forums/2115620-post15.html

 

[Adiktuz]

Use SetUnitX/Y, because it doesn't check for pathing unlike SetUnitPosition... not until you issue an order to the unit...

You would need to either use SetFlyHeight then SetUnitX/Y so that it won't check for collision until you issue ur unit to move or whatsoever,

 

[shadowvzs]

Use SetUnitX/Y, because it doesn't check for pathing unlike SetUnitPosition... not until you issue an order to the unit...

but i must order the unit with right click, and problem is that, i cant go allways down from cliff, if u check the screenshot in posted link then u understand why i must order

 

[Adiktuz]

you can capture the right-click order event and use SetUnitX/Y to mimic it...