Hive's Simple Edit Resources Thread

[Uraman]

Made this simple edit for the project.
Blood Elf Apartments, with two upgrades.
original model by SinisterX

 

[Cheshire]

hey, I need a a stand-alone cave. the blizzard doodad caves are all part of cliffs and look very bad alone.

these rock models are good (and the creator wrote that all his stuff is free to edit) I just need someone to add a cave opening to them (could take the ones from the blizzard caves or just color it dark and make it recede a little ), and melt the sides down a little so that they meld more seamlessly with the ground.

RockV3

I made these rocks to spice up the environment around mountains and also in nature in general. They fit best around Village Rock terrain but feel free to change the texture to fit your terrain. Here is an example picture of how I use them. Keywords: rock, stone

www.hiveworkshop.com

RockV4

I made these rocks to spice up the environment around mountains and also in nature in general. They fit best around Village Rock terrain but feel free to change the texture to fit your terrain. Here is an example picture of how I use them. Keywords: rock, stone

www.hiveworkshop.com

thanks!

 

[Kingsley]

Greetings Hivers! I have 2 simple edit request

1.) First Request Can anyone replace the head of the Pikeman bandit with the head pf the bandit captain?. Basically replacing the horns with wings.

2.) Second Request Can anyone Make a spearman version of the pikeman bandit. Basically this will replace the pike/halberd of the pikeman bandit to a spear similar to the spearman model. This second request is just making bandit version of the spearman model.

Note Please Include the Portraits.

Thank you so much!!!

 

[DREADMAN]

Greetings Hivers! I have 2 simple edit request

1.) First Request Can anyone replace the head of the Pikeman bandit with the head pf the bandit captain?. Basically replacing the horns with wings.

2.) Second Request Can anyone Make a spearman version of the pikeman bandit. Basically this will replace the pike/halberd of the pikeman bandit to a spear similar to the spearman model. This second request is just making bandit version of the spearman model.

Note Please Include the Portraits.

Thank you so much!!!

The texture wrapping of the model is very terrible. The advice is to use the base from Jiok

 

[Nobelian]

ProtoDragonRed_SvH

So here it is. Yes it needs a little tinkering like adding decay animations...I will do that soon. But I really needed this to release. Basic info: The mesh of the rider is made by me (not really good one). And the mesh of the drake is made by Misha. I tinkered all the other stuff like wrapping...

www.hiveworkshop.com

Excuse me, could someone please edit this model without the rider riding the proto dragon ?

 

[stein123]

I'm sure this was somewhere around at one point in the hive history, not sure if i got it from the request section or if it was uploaded to the model section :I

 

[Uraman]

Protodrakes without rider, added additional plates on the back, and two simple reskins.

 

[Nobelian]

Protodrakes without rider, added additional plates on the back, and two simple reskins.

Thanks

 

[Mathematician]

Protodrakes without rider, added additional plates on the back, and two simple reskins.

The green version reminds me very much of the Sahrotaar dragon from The Elder Scrolls V: Skyrim.

 

[SNIper of DARKness]

Would anyone be able to make a mounted version of this model? King (kinda like this: Paladin (Horse Mount) and Derivatives )

Alternative I need a King looking guy that has both mounted and dismounted animations for a Chemical Rage based ability.

 

[Wargeras]

Hello guys i have a request can someone add decay animation to this model remove a hero glow basicle make a standard unit from hero thanks in advance

HeroAbomination

A hero abomination model for the Modeling Contest #25 Projectile Launch: X: 49 Y: 108 Z: 104 This model's animations do not display properly in the Hive's model viewer. Keywords: hero, abomination, undead

www.hiveworkshop.com

 

[Chiron]

StormwindUnit.The basic model from Asssssvi,bakr..The geoset from johnwar.The skin from Footman16.
Edit：2.0 Smaller.

Can you make a Gilneas version of the cannon?

 

[Chiron]

Giant Bat / Gargoyle
Edit of the old Hearth of the Storms mod fell bat model, using in-game textures, and also added a version using 67_Chrome's darkwing skin.
Credits to the HoS team, 67_Chrome and the Hiveworkshop

View attachment 458797 View attachment 458798

how about a demonic verison?

 

[435D]

This is my first edit for this thread.

Credits: Kodo Beast and Derivatives by Ujimasa Hojo

 

[Manastorm]

Greetings!
Can someone replace textures of these two models(while keeping the headpiece/hood) with the NESentinel skin from 67chrome? Would mean a lot to me!

Models

Skin

 

[tillinghast]

Hello guys i have a request can someone add decay animation to this model remove a hero glow basicle make a standard unit from hero thanks in advance

HeroAbomination

A hero abomination model for the Modeling Contest #25 Projectile Launch: X: 49 Y: 108 Z: 104 This model's animations do not display properly in the Hive's model viewer. Keywords: hero, abomination, undead

www.hiveworkshop.com

 

[CGCyan]

Hello, can anyone add tusks of Tauer's Zul'jin model and thanks in advance.

Zul'jin

Here he is at last. Took me a while to finish this one. Not my best model evah, but I'm pretty satisfied with the result. Some parts of the texture are better than others, but I'm quite pleased with the animations. Don't even bother complaining about filesize, this guy has a buttload of...

www.hiveworkshop.com

 

[tillinghast]

Hello, can anyone add tusks of Tauer's Zul'jin model and thanks in advance.

Zul'jin

Here he is at last. Took me a while to finish this one. Not my best model evah, but I'm pretty satisfied with the result. Some parts of the texture are better than others, but I'm quite pleased with the animations. Don't even bother complaining about filesize, this guy has a buttload of...

www.hiveworkshop.com

add tusks to which version

 

[CGCyan]

add tusks to which version

All of the three

 

[tillinghast]

All of the three

do you just put them all in a map together and do this?

 

[CGCyan]

do you just put them all in a map together and do this?
View attachment 492542

No its for Campaign purpose.

For Zul'jin (Axethrower) - Be use on Released from Durnholde until reaching Quel'thalas
The Axethrower/Hand Blade - For war against Quel'thalas
One Armed - Where he escapes from the Farstriders when the trolls rescue him

Efit: Forgot to mention his depiction needs to be accurate

 

[CGCyan]

Can anyone pls recolor the Dungeon Tiles more Gray or Blackish.

 

[Wc3 Footman Enthusiast]

Hi big fan of everyone s work could i request some naga ish footman skin or models or some existing one of there are anyone hopefully not asking too much or breaking any rule here ! Keep up the good work everyone !!

 

[Lefroit]

Hello everyone. I have a texturing request: to recolor the Doomguard's armor to match Kil'jaeden's texture, similar to how the original Doomguard's armor matches with Eredar. Also, if possible, to recolor the Doomguard's skin to a palette similar to the DiabloCar skin below.

 

[Scias]

Hello everyone. I have a texturing request: to recolor the Doomguard's armor to match Kil'jaeden's texture, similar to how the original Doomguard's armor matches with Eredar. Also, if possible, to recolor the Doomguard's skin to a palette similar to the DiabloCar skin below.

Spoiler

View attachment 495153

How's this?

Spoiler: No Shoulderpad Texture

Spoiler: With Shoulderpad Texture

First time ever editing a skin, I didn't add the green texture to the shoulder pad since I wasn't sure how the transparency on it works, but I can if needed.

Edit: added the shoulder pad texture

 

[Lefroit]

How's this?

Spoiler: No Shoulderpad Texture

View attachment 495157

Spoiler: With Shoulderpad Texture

View attachment 495158

First time ever editing a skin, I didn't add the green texture to the shoulder pad since I wasn't sure how the transparency on it works, but I can if needed.

Edit: added the shoulder pad texture

Thanks! It's almost perfect, my only nitpick is to change armor's "yellow'ish" tone (not sure if it's the right word).

 

[Scias]

Thanks! It's almost perfect, my only nitpick is to change armor's "yellow'ish" tone (not sure if it's the right word).

I assume you mean the color of the trim on the armor?
Here's another version:

Spoiler: Edit

 

[Lefroit]

I assume you mean the color of the trim on the armor?
Here's another version:

Spoiler: Edit

View attachment 495174

Perfect, thanks for the help. I made a TC version if somebody wants it.

 

[mukuro14]

I like this model and want to use other textures to modify its style, but I found that the fabric on the corners of its head and crotch is unnecessary. I don't know how to modify the model, and the author of this model hasn't been online for four years. Can I get help here?
Skeleton Ogre

 

[AnyNameYouWish]

Can someone please add decay animations to Akama from the base game?

 

[AnyNameYouWish]

I made a custom aura target model for Thorns Aura, but it shows up way too soft in game. I would appreciate it greatly if someone could increase the opacity of the texture, or otherwise make it so that it's visible and noticeable in game.

 

[Chaosium]

I made a custom aura target model for Thorns Aura, but it shows up way too soft in game. I would appreciate it greatly if someone could increase the opacity of the texture, or otherwise make it so that it's visible and noticeable in game.

I assume you used War3 Model Editor? It happens more often than not that it messes up the alpha and uses a random value instead of 1, should be better now

 

[AnyNameYouWish]

I assume you used War3 Model Editor? It happens more often than not that it messes up the alpha and uses a random value instead of 1, should be better now

I did, yes. And thank you, it is far more visible now as you can see. Is this just something that happens with the program sometimes, or is there a way to avoid it? Because I tried checking the 'No Depth Test' box on my first model, which I saw that yours had, and it didn't make a difference.

Also, do you (or anyone else) know how to make it so that the aura target isn't visible through the whole model, even the parts that should be covering it?

 

[Chaosium]

Try with this one, pretty sure it's because the bone was billboarded. I removed the no depth test as well to see if that changes anything, I didn't realize it was enabled previously, I never use it

As per the alpha problem, I've noticed it happening a lot of the time when you assign a color to a geoset animation in WC3ME, even if you set it to 1 it would change it randomly, so a hacky workaround is to save it like so

 

[AnyNameYouWish]

Try with this one, pretty sure it's because the bone was billboarded. I removed the no depth test as well to see if that changes anything, I didn't realize it was enabled previously, I never use it

As per the alpha problem, I've noticed it happening a lot of the time when you assign a color to a geoset animation in WC3ME, even if you set it to 1 it would change it randomly, so a hacky workaround is to save it like so

View attachment 499308

It works! Thank you! +rep (I still don't know how that rep thing works)

I had 'no depth test' enabled cos I was just trying everything vaguely related to this I found in past Hive threads to see if it would be a fix. I now know about billboarding thanks to you. I checked the original General Aura Target model in the MPQ that I edited, and it indeed has the bone billboarded- but in-game the aura target circle never shows through a unit like your first edit did, which confuses me.

 

[AnyNameYouWish]

Would anyone be able to add a death animation to Village Building 1 (shown in pic)?

 

[Chaosium]

An attempt has been made

 

[AnyNameYouWish]

An attempt has been made

My thanks! However the smoke is visible during the stand animation, and the building falling is basically an instant disappearance in game despite looking fine and gradual in the model editor.

 

[Chaosium]

I fixed the dust visibility, as for the disappearance, what value did you put in this row?

The animation should be 1s long

 

[AnyNameYouWish]

I fixed the dust visibility, as for the disappearance, what value did you put in this row?

View attachment 500211

The animation should be 1s long

Cheers, the dust is no longer a problem! I was using a scout tower as a test unit so I left it as the default. In my last test I changed it to 1 second and you can see the result in the video, I still got the instant disappearance. The full animation still plays in the model editor, but in the world editor it's (second video)

 

[Chaosium]

Welp here's yet another version, did a quick test and it seems to play the anim fine this time

 

[AnyNameYouWish]

Welp here's yet another version, did a quick test and it seems to play the anim fine this time

Perfect! Thank you so much.

 

[LGR]

Hi, could someone please pin her hair to her chest so it doesn't move out of place during animations?

 

[Chaosium]

Hi, could someone please pin her hair to her chest so it doesn't move out of place during animations?

Here have a look

 

[LGR]

Here have a look

Thanks!

 

[AnyNameYouWish]

Would anyone be able and willing to add the standard Undead birth animation (small) to the Icecrown Obelisk? Model path doodads\cinematic\IcecrownObelisk\IcecrownObelisk.mdl.

If there is a way to have it fade into existence like the standard Undead buildings, or rise out of the ground like the Skull of Gul'dan shrine, that would be awesome, but I really only need the basic birth animation for it.

 

[doom_sheep]

some experiments with auras

 

[stein123]

Some gnoll edits, just edited the head and some little bits, nothing too fancy, already have portrait included:

 

[Stefan.K]

Some gnoll edits, just edited the head and some little bits, nothing too fancy, already have portrait included:
View attachment 507281View attachment 507282View attachment 507283View attachment 507284

 

[AnyNameYouWish]

I don't know if this is actually simple, but could someone slap the Goblin Tinker's backpack/arms thing onto the back of an Acolyte? I think it would make a good Techpriest.