War3 Model Editor

[Mr.Pockets00000]

This application has failed to start because d3dx9_35.dll was not found. Re-installing the application may fix this problem.

Why?

 

[Hero_Lief]

Reinstalling the application won't help, stupid M$ error. Install DirectX 9 or newer, and then try again.

Trollus, I suppose I kinda do. I don't believe it "should" work. It "might", but I don't think the author intended it for such purposes. If you've tested it and it "doesn't", then it "doesn't". Get my drift?

 

[mr.sheep]

hey i need help it keeps pn saying im missing components but i downloaded them all and redownloaded the program over and over, but it still says the same thing.
ps im on a windows 7 PC

 

[Dr Wigglz]

It says "This application has failed to start because d3dx9_35.dll was not found. Re-installing the application may fix this problem." What should i do now in order to get the program running?

 

[xorkatoss]

"This application has failed to start because d3dx9_35.dl was not found. Re-installing the application may fix this problem"
go (f)uck your self idiot
fix that (f)ucking thing!! -.-

 

[Piitah_masta]

shuld i have it in some special tft file??

 

[Piitah_masta]

the file opens and just are white!!
it dont even load omg my pc is ot some retarded virus pc wtf

 

[Hero_Lief]

If the entire window for the Model Viewer is gray or white, try turning off any theme you may have enabled. That sometimes causes problems with the rendering.

 

[BlackDragon12215]

"This application has failed to start because d3d9.dll was not found. Re-installing may fix this problem." This is what happens when I try to run the program. Any suggestions on what's wrong? I've re-downloaded this 4 times now in hopes something changed, yet nothing has.

PLEASE P.M. me or post back to tell me what's wrong or if you can give me one that you have that works.

same here how do you fix?
nvm i fixed

 

[BlackDragon12215]

ok i fixed it

 

[BloodSpilla]

If it doesn't want to start up then put it in the wc3 folder.

 

[Allen Walker 22]

Can someone give me a link to how to create a very simple model?

pm me after posting tnx

 

[kris4o]

Uffff.Chek old posts!

 

[JGGDMakervb6]

Highly approved

 

[Warcraft_Tester]

Dude im always having the same problem, The Program Can't Start because d3dx9_35.dll is missing from your computer. Try reinstalling the program to fix this problem, i want to use that program but how can i if i can't get the program fix. Ps i use opera as my browser and Im using windows 7.

 

[Warcraft_Tester]

Problem Solved

"This application has failed to start because d3d9.dll was not found. Re-installing may fix this problem." This is what happens when I try to run the program. Any suggestions on what's wrong? I've re-downloaded this 4 times now in hopes something changed, yet nothing has.

PLEASE P.M. me or post back to tell me what's wrong or if you can give me one that you have that works.

Umm dude I know the reason why, i had the same problem but than I just knew it like a bullet of ideas hitting me into my head and its because i needed direct 9
to use the system, the best website would be to solve this problem is http://www.microsoft.com/downloads/en/results.aspx?pocId=&freetext=directx&DisplayLang=en go to this link and find this DirectX End-User Runtime i readed what it does and it says that it installs all missing files that you need to use this program, install this program and wait one hour, reset and you should able to use the model editor hope you like this advice. Ps you don't have to thank me if this works because I already did it for you.

 

[kris4o]

Download it then

 

[mio]

10/10

 

[1nic12]

it says "unable to open war3patch"
what should i do now please help

me too but other people say download it again

wahahahahahahahahaha

 

[ironliondoor]

I have the same problem Warcraft_Tester had. Is there any other way to get it working without downloading Direct 9??

NVM! I downloaded Direct X thingymabob and it worked fine

 

[GoatWalker_Z_]

umm why doesnt it work in my computer?

umm when i use it it says that i am missing a file how do i get this file?

 

[Hero_Lief]

If it's d3dx9 or something like that, download DirectX 9. Google it.

 

[NinjaofWind]

Dude im always having the same problem, The Program Can't Start because d3dx9_35.dll is missing from your computer. Try reinstalling the program to fix this problem, i want to use that program but how can i if i can't get the program fix. Ps i use opera as my browser and Im using windows 7.

Yup, I had that problem and i was soooooo ticked untill i found a better version of it its because dl39 or whatever wasnt in the file. but at the last word ill show you the link and in that file that has dl39 whatever so then you can open it please thank me though otherwise you cant even use model editor and heres the link http://www.filefront.com/14265031/wa...tor_v1.07.zip/

 

[NinjaofWind]

"This application has failed to start because d3d9.dll was not found. Re-installing may fix this problem." This is what happens when I try to run the program. Any suggestions on what's wrong? I've re-downloaded this 4 times now in hopes something changed, yet nothing has.

PLEASE P.M. me or post back to tell me what's wrong or if you can give me one that you have that works.

Yup, I had that problem and i was soooooo ticked untill i found a better version of it its because dl39 or whatever wasnt in the file. but at the last word ill show you the link and in that file that has dl39 whatever so then you can open it please thank me though otherwise you cant even use model editor and heres the link http://www.filefront.com/14265031/wa...tor_v1.07.zip/

 

[NinjaofWind]

umm when i use it it says that i am missing a file how do i get this file?

Yup, I had that problem and i was soooooo ticked untill i found a better version of it its because dl39 or whatever wasnt in the file. but at the last word ill show you the link and in that file that has dl39 whatever so then you can open it please thank me though otherwise you cant even use model editor and heres the link http://www.filefront.com/14265031/wa...tor_v1.07.zip/

 

[Hero_Lief]

Don't triple post.

 

[Lichking9]

DON'T DOWNLOAD THIS! I can't even open the editor! I'll give it a...
0/9348750913847509348750398457230

do not dl

 

[Lichking9]

Can't open the program after I extracted it.

I just cant open it too

 

[iAcce]

I feel really stupid for asking this... But where do I find already existing WC3 Models and how do i create new?

 

[Fjury]

This program is equal to win, no doubt.

 

[Hero_Lief]

iAcce, use an MPQ Extractor. Or the Model Viewer.

 

[iAcce]

okay, thx

 

[The Judger]

it would be very nice if u could make a tutorial... but 1 more thing when i remove a militia's head and replace it with uther's head using geoset manage and your own textures, he is invisible in game. like he has a locust or something. BUT if i just remove militia's head its working HELP!

 

[-Peper-]

Attach the Geoset-manage thing not to 'Head-ref' but 'bone-head' otherwise the head invisible.

 

[The Judger]

i did, and i placed it in right position still... any sugestions?

 

[-Peper-]

Try to attach the geoset to a Bone-symboled Node that contain the ref, so for Militia it's Bone_Head.

 

[The Judger]

Try to attach the geoset to a Bone-symboled Node that contain the ref, so for Militia it's Bone_Head.

Ok I didn't understand any of that so, could you make a tutorial too. There is 1 on youtube (wich i was using to make a model) but I did all of that and still doesn't work. I think it would help A LOT of ppl here. Tnx anyway...

 

[-Peper-]

Okay, i'll make a tutorial sooner or later (not now, busy)

 

[The Judger]

Okay, i'll make a tutorial sooner or later (not now, busy)

AWSOME! You're the man! But could you P.M. me when you do pls

 

[babymike360]

Looks cool

 

[LanjiaoKnight]

"This application has failed to start because d3d9.dll was not found." Re-installing may fix this problem." This is what happens when I try to run the program.Any suggestions on what's wrong? I've re-downloaded this 4 times now in hopes something changed, yet nothing has.

PM me please.

 

[Aslit]

preffer 3ds2011 over this

 

[Hero_Lief]

I'm sure everyone would, but unfortunately, not everyone can spare $3,995 for Warcraft modelling. Unless you work at Blizzard, of course.

 

[Aslit]

or that u download the thing, ofc, who would pay that when u can download it for free

 

[Dyre Wolf]

The d3d9.dll thing

"This application has failed to start because d3d9.dll was not found. Re-installing may fix this problem." This is what happens when I try to run the program. Any suggestions on what's wrong? I've re-downloaded this 4 times now in hopes something changed, yet nothing has.

PLEASE P.M. me or post back to tell me what's wrong or if you can give me one that you have that works.

Yea i just googled d3d9.dll and it came up with something that will probaly work (I hope)

 

[Dyre Wolf]

nah it didnt work...

 

[Hero_Lief]

Just install DirectX, dammit!

or that u download the thing, ofc, who would pay that when u can download it for free

Which is illegal and you could go to jail.

 

[Aslit]

1 o dont go to jail due that
2 thats just "illegal" in some places ;D

 

[Hero_Lief]

Torrenting paid and copyrighted software is illegal if the company that created said software exists within bounds of it being illegal. Not to mention that fact that it's copyrighted software. AutoCAD, 3DSMAX, they're all copyrighted.

 

[Aslit]

already checked that, the so called "piracy" is legal here