What the hell is wrong with the Death and Decay spell?

[Matarael]

I made a 4 level spell based on it, and for the first 2 levels it's fine, but the 3rd and 4th levels kill units instantly. I set it to 3, 4, 5, and 6 percent unit life, but it's doing something like 3%, 4%, 500% and 600% (checked using triggers to show how much damage it does.)

And before you ask me to check the values in Object Editor, I did, a few hundred times. It's normal and I didn't make any mistakes.

 

[Maker]

I tested it, gave it 5 levels. 0.04, 0.06, 0.08, 0.10, 0.12 damage. It worked fine, so it must be something else.

 

[Matarael]

How very infuriating. Very well, I'll start over, I hope it's not some old residual trigger element from some other function that's causing this (it shouldn't, the percentage of the damage dealt is consistent; a 300HP unit would get 3600 damage, a 400 one would get 4800 damage, etc).

 

[APproject]

Seems like very first levels counts as 1.00 equal 1% and next ones might count as 1.00 equal 100%. Try to set levels that makes 500% and 600% to 0.05 and 0.06 value.