• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Afronight's request stronghold (temp closed)

Status
Not open for further replies.
Level 4
Joined
Oct 2, 2004
Messages
128
I like your sheep idea. Infact, I am in much need of a cow model as well... If you do custom models, but not custom animations, couldn't you put the sheep animations onto the cow? :D

Actually, I'm here to request something else... lol

I need a Female Villiager model - It's more of a geomerge, and it uses other models' animations, so... yeah. Here goes:

- Male Villiager 1's body (if possible, add breasts, and make him (her) more athletic (not as fat). :D
- Sorceress' head
- No weapon
- Male Villiagers models, but... I'd like for the attack animations to work well with a sword. Could you use the Demon Hunter's attack animations?
- Lastly, please un-detail the muscles, and make the skin color match the sorceress' face. :D

So far, I've requested that to two other people with no success... You're my last hope! Please consider doing this model. If not for me, for the LoaP creators, as they seriously need new female models. :roll:
 
Level 5
Joined
Aug 14, 2004
Messages
188
Alien warrior, pretty simpple changes, just make'em bigger looking and sharper claws, maybe add the crypt lords spikes on his back, longer tail? .. uhh. . . and a longer head for sure... ... because the drones heads small. .. . and yeah, heh. . . Up to it?
 
sure ill fix up my ravager. oh and sir poops alot, i made the cow, thhis is the best i can do with it, but ill give it a skin.
cow.jpg
 
Level 5
Joined
Aug 14, 2004
Messages
188
"Alien warrior, pretty simpple changes, just make'em bigger looking and sharper claws, maybe add the crypt lords spikes on his back, longer tail? .. uhh. . . and a longer head for sure... ... because the drones heads small. .. . and yeah, heh. . . Up to it?"

Ughh.. i ws hopeing you could do all that to the drone, not the ravanger
 
Level 4
Joined
Oct 2, 2004
Messages
128
Alright, Afro. You went out of proportion on the Female Villiager Request, lol.

Thank you VERY much for getting to it as soon as you did, though! Decent job, however I posted some request-changes on the model replies. If you have time, PLEASE review them, and if you can, make the changes. It looks like it could be a great model, but first, make the changes...

Again, thanks for making it soo fast! I hope to see the changes whenever you get to them. :D
 
Level 4
Joined
Oct 2, 2004
Messages
128
Ho ho ho! I found a great job for you, Afro - for some reason or another, no one has done it yet.

This project doesn't really have a time-frame; I just assumed if you were looking for something clever to do, you could try this.

Project: Extract the Night Elven Archer model from the WC3 Game Interface.

If you've ever played through the single player campaign, you know of the Night Elver Archer that you see in the Campaign Screen. I propose you take this out of it's background, and put all of Sylvanas' Animations on it.

#1 - The model is VERY nice detail, and I think there's some way to make the game acknowledge that it is part of another model, thus making the file size very small (less than 100kb). If you CANNOT give it a small file size, that's perfectly fine - I'm using this one on a Two Player Lan map (no map size limit). :D

#2 - If you can make keep it at a small size, imagine how many people will use it! Some people may even just take her face, and use it on a orc model, which in my oppinion would look very nice (after coloring it green). :D

Either tell me what you think, or do it without telling me, lol. If you need to know the exact name of the Interface Model this sub-model is found in, I can get it for you. :wink:

Good luck! I doubt someone as good as you will need luck though! 8)
 
Level 5
Joined
Jun 21, 2004
Messages
148
All mine really needs is a basic melee unit with a custom club.. and skinned it wouldn't be too hard. I would do it myself but I dont have the right programs, or computer for that matter, to do the job on my own
 
Level 4
Joined
Oct 2, 2004
Messages
128
Afro. I've asked for quite a few things in the last little while, so when you have time for another request from me, please tell me by sending me a PM. I have one more request that I need sometime or another... It's similar to the Female Villiager Request. :D

So yeah. Whenever your schedule opens up, give me a hollar!
 
Level 11
Joined
Aug 4, 2004
Messages
978
Ah yes, the annual death by turkey occured last week didn't it? The time of year when the turkeys fight back because they get eaten for Thanksgiving...how tragic. But I still want my elf knight.
 
Level 2
Joined
Sep 21, 2004
Messages
23
Hey Knight! COuld you please give the Archmage the decay animation of the hydromancer Model? I need it because I want to make my own race in which you can upgrade a hydromancer (or whatever I'll name it) to an Archmage. Thx!
 
Level 2
Joined
Apr 14, 2004
Messages
26
As i'm sure you're aware, your Death Knight Model does not work in the World Editor or in the game (many of the Textures do not display), could you fix it? and maybe make a version without the Necromancer's Helmet on the horse?
 
Level 11
Joined
Aug 4, 2004
Messages
978
Just read your post in the off topic section...I had been wondering where you were.

Let's see....Knight anims, Archmage horse, priest body(with archer shoulder armour instead of those yellow shoulder pads), Swordsman short sword, Dragonhawk rider lance. I believe that covers my request. And thank you for doing it. :)
 
Level 3
Joined
Oct 11, 2004
Messages
28
Most esteemed Afronight_76,

I have posted a thread asking for naga model aid, and nobody has responded. I have taken it unto myself to find a modeler, as nobody is answering the thread in which I posted for the aid.

The next couple paragraphs are from a portian of the thread, explaining why we may need your modeling help.

-----

On the Battle.net suggestion forum there is currently a project called "The Naga Project". This projects goal is to convince Blizzard of adding the Naga race to The Frozen Throne by designing and balancing the race themselves. The head pancho of the project is named "Nintendoman_766" and creates and designs the project according to what suggestions are found in the forum.

However, we have run into some difficulties in proceeding in this quest. There are no people currently involved in the project that can model, due to the lack of technology. This is where we (Naga Project Regulars) would ask a boon of the modelers out there. We would like a couple of expert modelers to participate in the project and help design the new models we need.

-----

Our requests are quite vague at the moment for the specific models, but there are a number we are fiddling around with.

The two most suggested models are...

A. A two legged Naga riding a Green Drake.
B. A Naga riding a hydra carrying a tridant.

If you accept this proposel and join the project, the rewards could include any of your Naga Models on Ladder Battle.net.

Thank you for your time.
 
Level 4
Joined
Oct 13, 2004
Messages
90
hey, can you make a dragonspawn skin? I want it to be covered in brown fur, please. any of the dragonspawns is fine, i don't care which one you skin.

thanks,

Dragonfox
 
Level 3
Joined
Dec 11, 2004
Messages
56
:twisted::
please, could you make a troll blademaster skin with the body of the shadowhunter and something in his head like this guy:
Shishio.jpg
Oh also i would like that it eyes seemed as if they where set on fire
 
Status
Not open for further replies.
Top