[Trigger] Need a lil help.....

[Xris]

1.hey guys do you know y my creaps when i try and hit them my hero allways misses... it is the goust undead creap and the lumber unded creap...

2. how can i make a shop that when you buy a item you get an ability insted of the item.

 

[GhostWolf]

• Unknown
  • Events
    • Unit - A unit Sells an item (from shop)
  • Conditions
  • Actions
    • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
      • If - Conditions
        • (Item-type of (Sold Item)) Equal to Your_Item
      • Then - Actions
        • Item - Remove (Sold Item)
        • Unit - Add Some_Ability to (Buying unit)
      • Else - Actions

 

[Xris]

tx dude realy help full.

 

[raft_pl]

You would use books (of strengh, for example) to make it possible to buy abilities with full inventory. Just set the strenght value to 0.

 

[Xris]

• Unknown
  • Events
    • Unit - A unit Sells an item (from shop)
  • Conditions
  • Actions
    • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
      • If - Conditions
        • (Item-type of (Sold Item)) Equal to Your_Item
      • Then - Actions
        • Item - Remove (Sold Item)
        • Unit - Add Some_Ability to (Buying unit)
      • Else - Actions

how can i make a book that will erase the abilities?

 

[GhostWolf]

• Unknown
  • Events
    • Unit - A unit Uses an item
  • Conditions
    • (Item-type of (Item being manipulated)) Equal to Remove_Skill_1
  • Actions
    • Unit - Remove Skill_1 from (Triggering unit)

 

[Xris]

but that would erase only one ability i want it to erase all abilities at once not just one

 

[humpadumpa]

Reply

You could make a trigger that removes all skills used in your map. It could be kinda many, but.. that's mapmaking xD

ex:

• Remove Ablities
  • Events
    • Unit - A unit Sells an item (from shop)
  • Conditions
  • Actions
    • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
      • If - Conditions
        • (Item-type of (Item being manipulated)) Equal to Remove Skills
      • Then - Actions
        • Unit - Remove Aimed Shot from (Buying unit)
        • Unit - Remove Die from (Buying unit)
        • Unit - Remove Hide from (Buying unit)
        • Unit - Remove Jump..? from (Buying unit)
        • Unit - Remove Volley from (Buying unit)
      • Else - Actions

 

[Xris]

omg that will take a while, but tx humpadumpa...

 

[humpadumpa]

and.. you could make many triggers for it (so it won't lag when u open the trigger in trigger editor. just make a

• Trigger - Run Remove Skills2 <gen> (checking conditions)

after the first grp of skills and so on..

 

[Xris]

does any one of you guys know how to make cool magics with trigers?

 

[humpadumpa]

maybe.. i'll send one soon.

 

[Xris]

i wantto make a magic that sand surrounds the targeted unit and squizes him doing 2 times the casters int.

 

[humpadumpa]

could be possible
just dunno the sand thing.. xD (must prolly make an own model for that)

 

[GhostWolf]

• Unknown
  • Events
    • Unit - A unit Starts the effect of an ability
  • Conditions
    • (Ability being cast) Equal to Your_Skill
  • Actions
    • Special Effect - Create a special effect attached to the overhead of (Target unit of ability being cast) using Abilities\Spells\Other\TalkToMe\TalkToMe.mdl
    • Set Special_Effect = (Last created special effect)
    • Animation - Change (Target unit of ability being cast)'s size to (100.00%, 100.00%, 50.00%) of its original size
    • Unit - Cause (Triggering unit) to damage (Target unit of ability being cast), dealing 500.00 damage of attack type Spells and damage type Normal
    • For each (Integer A) from 6 to 10, do (Actions)
      • Loop - Actions
        • Animation - Change (Target unit of ability being cast)'s size to (100.00%, 100.00%, ((Real((Integer A))) x 10.00)%) of its original size
    • Special Effect - Destroy Special_Effect

This spell will do:

• Make a effect (find a effect by yourself).
• "Smash" the unit to 50% of its height.
• Deal the unit damage.
• Make the unit "grow" back to its normal height.

Warning the spell above is NOT MUI (Multi Instance).

[Offtopic] Finaly found the code for "•" ^^

 

[humpadumpa]

What is Multi Instance?

 

[GhostWolf]

MUI (Multi Instance) means more then one unit can cast it at the same time.
If 2 units will cast this at the same time it will mess up.

 

[raft_pl]

Multi Instance means that spell works for all players, that will be playing the map... (i may be wrong, dont know the exact meaning xD)
And GhostWolf, why youre saying, that your spell is not MUI, there are no wait-actions or refering to other triggers, its simple instant-cast spell that cant collide if runned many times for different players... :|

@Up
Arh, you were faster than me... Anyway, there is an incredibly small chance, that 2 or more players will cast that ability at the same time. Something like 1:1000.

 

[Xris]

they have a sand thing on the war3 editor but it does not surround it just flowts around.

 

[humpadumpa]

Multi Instance means that spell works for all players, that will be playing the map... (i may be wrong, dont know the exact meaning xD)
And GhostWolf, why youre saying, that your spell is not MUI, there are no wait-actions or refering to other triggers, its simple instant-cast spell that cant collide if runned many times for different players... :|

@Up
Arh, you were faster than me... Anyway, there is an incredibly small chance, that 2 or more players will cast that ability at the same time. Something like 1:1000.

Well, u'll get +rep anyways (i think i know how to make MUI out of spell triggers with w8 in, but i'm not rly sure.. gonna test it.)

[EDIT]: After i've made a trigger spell 4 Xris

 

[raft_pl]

If it will work, tell me how to do it... I`d really need something like that xd

 

[Xris]

• Unknown
  • Events
    • Unit - A unit Starts the effect of an ability
  • Conditions
    • (Ability being cast) Equal to Your_Skill
  • Actions
    • Special Effect - Create a special effect attached to the overhead of (Target unit of ability being cast) using Abilities\Spells\Other\TalkToMe\TalkToMe.mdl
    • Set Special_Effect = (Last created special effect)
    • Animation - Change (Target unit of ability being cast)'s size to (100.00%, 100.00%, 50.00%) of its original size
    • Unit - Cause (Triggering unit) to damage (Target unit of ability being cast), dealing 500.00 damage of attack type Spells and damage type Normal
    • For each (Integer A) from 6 to 10, do (Actions)
      • Loop - Actions
        • Animation - Change (Target unit of ability being cast)'s size to (100.00%, 100.00%, ((Real((Integer A))) x 10.00)%) of its original size
    • Special Effect - Destroy Special_Effect

This spell will do:

• Make a effect (find a effect by yourself).
• "Smash" the unit to 50% of its height.
• Deal the unit damage.
• Make the unit "grow" back to its normal height.

Warning the spell above is NOT MUI (Multi Instance).

[Offtopic] Finaly found the code for "•" ^^

can't find this line....
Unit - Cause (Triggering unit) to damage (Target unit of ability being cast), dealing 500.00 damage of attack type Spells and damage type Normal

 

[humpadumpa]

I think this spell works:

• Freeze Enemys
  • Events
    • Unit - A unit enters (Playable map area)
  • Conditions
    • (Unit-type of (Triggering unit)) Equal to FrozenSpell_Dummy
  • Actions
    • Unit Group - Pick every unit in (Units in (Region centered at (Position of (Triggering unit)) with size (125.00, 125.00))) and do (Actions)
      • Loop - Actions
        • Unit - Add Slow to (Picked unit)
    • Wait 1.20 seconds
    • Unit - Remove (Triggering unit) from the game

The FrozenSpell_Dummy (unit) & the Freeze Enemys (spells) are used

[EDIT]: Ah.. yeah lol XD you're right changing now
[EDIT2]: Done

 

[GhostWolf]

Make unit damage unit/area are the 3th and 4th last actions in unit actions.

 

[humpadumpa]

Gonna test my idea now. Just need a simple not-MUI spell first. >.<

 

[GhostWolf]

Didn't really understand the propose of it but there is no reason it will work since you removed the triggering unit before picking units in area.
Change the order.

 

[Xris]

Ghost Wolf that does like 500 dmg right? how can i make it int of hero times 2 to be the dmg??

 

[humpadumpa]

Does this work? -.-

• Another 1
  • Events
    • Unit - A unit Begins casting an ability
  • Conditions
    • (Ability being cast) Equal to Freeze Enemys
  • Actions
    • Special Effect - Create a special effect attached to the overhead of (Target unit of ability being cast) using Abilities\Spells\Other\TalkToMe\TalkToMe.mdl
    • Set Special_Effect[(Spec_Effect_Int + 1)] = (Last created special effect)
    • Animation - Change (Target unit of ability being cast)'s size to (100.00%, 100.00%, 50.00%) of its original size
    • Unit - Cause (Triggering unit) to damage (Target unit of ability being cast), dealing ((Real((Intelligence of (Triggering unit) (Include bonuses)))) x 2.00) damage of attack type Spells and damage type Normal
    • For each (Integer A) from 6 to 10, do (Actions)
      • Loop - Actions
        • Animation - Change (Target unit of ability being cast)'s size to (100.00%, 100.00%, ((Real((Integer A))) x 10.00)%) of its original size
    • Special Effect - Destroy Special_Effect[Spec_Effect_Int]
    • Set Spec_Effect_Int = (Spec_Effect_Int + 1)

Variables: Special Effect=special effect array 8192 (this means that the spell can be used 8192 times, if it works ) (>.<) Spec_Effect_Int = Integer

BTW, i added that the dmg is the double of the hero's int.

 

[GhostWolf]

• Unit - Cause (Triggering unit) to damage (Target unit of ability being cast), dealing ((Real((Intelligence of (Triggering unit) (Include bonuses)))) x 2.00) damage of attack type Spells and damage type Normal

Sorry forgot you wanted based on Int.

• Instead of 500 put it on Arithmetic
• On the first one go to "Conversation - Convert Integer to Real".
• Find "Hero - Hero Attribute".
• And on the second do x2


[Offtopic] humpadumpa now you've made it ! lol I thought on it for some time before like 2 weeks on "how to make a index that will update itself automaticly to +1" for exacly the same reason but didn't think of using another variable inside it

 

[Parrothead]

http://www.hiveworkshop.com/forums/showthread.php?t=37965

 

[humpadumpa]

[Offtopic] humpadumpa now you've made it ! lol I thought on it for some time before like 2 weeks on "how to make a index that will update itself automaticly to +1" for exacly the same reason but didn't think of using another variable inside it

nice i got the idea long ago, but i were too lazy to test it

 

[Xris]

Does this work? -.-

• Another 1
  • Events
    • Unit - A unit Begins casting an ability
  • Conditions
    • (Ability being cast) Equal to Freeze Enemys
  • Actions
    • Special Effect - Create a special effect attached to the overhead of (Target unit of ability being cast) using Abilities\Spells\Other\TalkToMe\TalkToMe.mdl
    • Set Special_Effect[(Spec_Effect_Int + 1)] = (Last created special effect)
    • Animation - Change (Target unit of ability being cast)'s size to (100.00%, 100.00%, 50.00%) of its original size
    • Unit - Cause (Triggering unit) to damage (Target unit of ability being cast), dealing ((Real((Intelligence of (Triggering unit) (Include bonuses)))) x 2.00) damage of attack type Spells and damage type Normal
    • For each (Integer A) from 6 to 10, do (Actions)
      • Loop - Actions
        • Animation - Change (Target unit of ability being cast)'s size to (100.00%, 100.00%, ((Real((Integer A))) + 10.00)%) of its original size
    • Special Effect - Destroy Special_Effect[Spec_Effect_Int]
    • Set Spec_Effect_Int = (Spec_Effect_Int + 1)

Variables: Special Effect=special effect array 8192 (this means that the spell can be used 8192 times, if it works ) (>.<) Spec_Effect_Int = Integer

BTW, i added that the dmg is the double of the hero's int.

how the fuck do you do this!! T_T
Set Special_Effect[(Spec_Effect_Int + 1)] = (Last created special effect)

 

[GhostWolf]

Its 2 diffrent integars, one harrayed and one not.

And I just noticed that the loop has Integer[A]+10 , change that to Integer[A]x10.

 

[Xris]

Its 2 diffrent integars, one harrayed and one not.

And I just noticed that the loop has Integer[A]+10 , change that to Integer[A]x10.

tx dude lets see what else do i hae to make for the map...

 

[humpadumpa]

Its 2 diffrent integars, one harrayed and one not.

And I just noticed that the loop has Integer[A]+10 , change that to Integer[A]x10.

ah, yeh changing now

And.. Variables, not integers. they're not both integers. one's integer and the other one's a special effect array

 

[GhostWolf]

one's integer and the other one's a special effect array

Ah right lol my mistake

 

[humpadumpa]

[Offtopic] i'll /sleep now cya

 

[GhostWolf]

Same for me, good night.

(and humpadumpa, stop copying my triggers )

 

[humpadumpa]

Same for me, good night.

(and humpadumpa, stop copying my triggers )

Hey, I said i needed a non-MUI trigger, but got none, so I took urs

 

[Xris]

how can i make a spell that you get barryed in the ground, no one sees you at that time exept you.... (like wind walk) and if you hit a unit it goes under ground and you appear up again the unit you hit gets 15 second stun and after that it goes back to normal up from the ground. (you can hit the unit witch is under the ground.)

[Edit] like this... http://youtube.com/watch?v=CDTvxTw9GYc&feature=related


[Edit2] and is any one eble to make somehting like this? http://www.youtube.com/watch?v=JJrogYo7IjY

 

[raft_pl]

U mean windwalk, that makes the unit attacked while breaking the stealth go underground and be stunned?


EDIT:

• Windwalk-stun-burrow
  • Events
    • Unit - Unit is target of attack. (or something like that)
  • Conditions
    • (Attacking unit) have buff ([Windwalk buff])
  • Actions
    • Unit - Add Burrow to (Attacked Unit)
    • Unit - Order (Attacked unit) to Undead - Crypt Fiend - Burrow (is this correct path?)
    • Unit - Pause (Attacked unit).
    • Set W-S-B_Unit[(Player number of (Owner of (Attacked unit)))] = (Attacked unit)
    • Wait some seconds.
    • For each (Integer A) do (Unit - Unpause W-S-B_Unit[(Integer A)]
    • For each (Integer A) do (Unit - Order W-S-B_Unit[(Integer A)] to Undead - Crypt Fiend - Burrow

Dont know if this will work, its midnight in my coutry, im tired... xD

 

[Xris]

U mean windwalk, that makes the unit attacked while breaking the stealth go underground and be stunned?

no. like you click the ability and your hero appears to be underground like the model goes under ground... and if you hit a unit it 's model goes under ground with a bit stun that lasts 15 sec and aftr the 15 sec it goes to normal.

 

[Xris]

U mean windwalk, that makes the unit attacked while breaking the stealth go underground and be stunned?


EDIT:

• Windwalk-stun-burrow
  • Events
    • Unit - Unit is target of attack. (or something like that)
  • Conditions
    • (Attacking unit) have buff ([Windwalk buff])
  • Actions
    • Unit - Add Burrow to (Attacked Unit)
    • Unit - Order (Attacked unit) to Undead - Crypt Fiend - Burrow (is this correct path?)
    • Unit - Pause (Attacked unit).
    • Set W-S-B_Unit[(Player number of (Owner of (Attacked unit)))] = (Attacked unit)
    • Wait some seconds.
    • For each (Integer A) do (Unit - Unpause W-S-B_Unit[(Integer A)]
    • For each (Integer A) do (Unit - Order W-S-B_Unit[(Integer A)] to Undead - Crypt Fiend - Burrow

Dont know if this will work, its midnight in my coutry, im tired... xD

tx for trying to help but i do not think you can do it ^_^"

 

[raft_pl]

Well, i never test triggers, i write them from memory, without having WE and Trigger Editor opened... So you should never be sure if my trigger will work

 

[humpadumpa]

hey, i think i can do it posting soon, if i can.

[EDIT]: nop.. didn't find a way, but it should be possible.

 

[Xris]

>.<" tx any way..

 

[GhostWolf]

You can't use burrow since when using it the unit can't attack/get attacked.

I don't think there is a way to do it (maybe with JASS ? dunno).

 

[humpadumpa]

If there's a way to make the unit a flying unit? then it should work..

 

[GhostWolf]

Never tried to make a unit's height beneath zero, you're sure it would work ?

You could use Crow Form for that.

Add Crow Form to BlaBla
Set Height to BlaBla
Remove Crow Form from BlaBla

 

[humpadumpa]

dunno, but it works in object editor ^^

and i'll try the crow form thing