Shar Dundred
Hosted Project: LoA
- Joined
- May 6, 2009
- Messages
- 6,409
Legends of Arkain Series
The Grand Admiral will be pleased.
-
Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
-
Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.
-
The Hive's 22nd Icon Contest: Creep Abilities is now concluded, time to vote for your favourite set of icons! Click here to vote!
-
✅ The POLL for Hive's Texturing Contest #34 is OPEN! Vote for the TOP 3 SKINS! 🔗Click here to cast your vote!
-
✅ The POLL for Hive's Techtree Contest #20 is OPEN! Vote for the TOP 3 FACTIONS! 🔗Click here to cast your vote!
Kul Tiras Footman
- Author(s)
- Footman16
- Size
- 679.15 KB
- Rating
- Downloads
- 2028
- Created
- Jun 14, 2021
- Updated
- Jul 12, 2026
- Resources
- 4
- State
Approved
This bundle is marked as recommended. It works and satisfies the submission rules.
Kul Tiras Footman by Footman16
Anyone on the Hive's discord might have seen the various WiPs I posted and so can attest to it being all completely freehand!
The picture I used for inspiration was this one:
Again whilst the edits to the model itself are very small I believe they are necessary for the intended look. However if one does not wish to import the separate model and simply wants to replace the original Footman they simply need to import the texture and set the path to Textures\Footman.blp however the texture will not look as good due to some wrapping issues on the original Footman model. Hence why if you have the file space available you should use the edited model alongside the skin.
To import:
Import the .mdx model file:
War3MapImported\Kul Tiras Footman.mdx
Import the Texture and remove War3mapImported\
So it look as follows:
KulTirasFootman.blp
So if you decide to use this resource please give credits. If you wish to make any edits or changes please ask permission and also do not upload this anywhere else without permission, thanks!
Also big thanks to Frank for helping out with an issue with the extents of the model.
After making my Admiral's Elite Guard model I felt it wouldn't be fair to leave the forces of Kul Tiras without their standard frontline soldier the Footman. Therefore I decided to make a Footman skin based on the look of the forces of Kul Tiras from Battle for Azeroth. For this I chose the Kul Tiras Quest Plate (Waycrest recolour) as inspiration in terms of design and colours since I felt it fit the best (in terms of silvers, golds and dark greens).From Wowpedia said:
Anyone on the Hive's discord might have seen the various WiPs I posted and so can attest to it being all completely freehand!
The picture I used for inspiration was this one:
Again whilst the edits to the model itself are very small I believe they are necessary for the intended look. However if one does not wish to import the separate model and simply wants to replace the original Footman they simply need to import the texture and set the path to Textures\Footman.blp however the texture will not look as good due to some wrapping issues on the original Footman model. Hence why if you have the file space available you should use the edited model alongside the skin.
To import:
Import the .mdx model file:
War3MapImported\Kul Tiras Footman.mdx
Import the Texture and remove War3mapImported\
So it look as follows:
KulTirasFootman.blp
So if you decide to use this resource please give credits. If you wish to make any edits or changes please ask permission and also do not upload this anywhere else without permission, thanks!
Also big thanks to Frank for helping out with an issue with the extents of the model.
Added an alternate version of the Footman model with the kettle helmet which is more similar to the reference image.
Improved the Team-colour on shield and shins and shading on the shield.
Keywords: Admiral, Footman, Guard, Kul Tiras, Kul'Tiras, Kul'Tiran, Kul Tiran, Boralus, Proudmoore, Jaina, Katherine, Daelin, Admirals, Admiral's, Watch, Waycrest
Previews
Reviews
Shar Dundred
Hosted Project: LoA
- Joined
- May 6, 2009
- Messages
- 6,409
Legends of Arkain Series
I dunno, I feel like that kind of helmet tends to look a bit weird next to WC3 style models
Last edited:
Footman16
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 4,225
So ideally I would edit the model a lot more since this is the model section however, I believe CloudWolf has models that are only slight edits and the main purpose is the texture that comes with it.You should change the model more. It looks too much like the original Footman model. Perhaps try to give it the same kind of helmet shown on your reference
So Ive uploaded it as a model so people can use the texture as it is intended with the better wrap and slight edits. But if one wanted they could use the texture on its own. The reason I didn't upload it as a skin with the better wrap model in a pastebin link is because people would not read the description and keep asking why the texture doesn't look as shown; this way somebody who doesn't read the description will still use the texture properly since the model comes with the download as standard
Footman16
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 4,225
I know this is technically a double-post however more than 2 weeks has passed since my previous message.You should change the model more. It looks too much like the original Footman model. Perhaps try to give it the same kind of helmet shown on your reference
I have posted an edit of the Footman model with an alternate helmet more similar to the reference image
If there any other suggestions for variations/derivatives I'd be happy to hear them.
- Joined
- Nov 19, 2005
- Messages
- 8,008
Same as with your other model. You might want to recalculate the extents of the model.
Footman16
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 4,225
Extents have been recalculated
- Joined
- Mar 1, 2020
- Messages
- 86
First great job man!!!!!!I know this is technically a double-post however more than 2 weeks has passed since my previous message.
I have posted an edit of the Footman model with an alternate helmet more similar to the reference image
Second maybe change sword and shield design to look more like in WoW.
- Joined
- Nov 19, 2005
- Messages
- 8,008
A very nice and well made edit of the normal footman model.
Lovely skin.
Lovely skin.
Footman16
Community Manager
- Joined
- Jul 14, 2012
- Messages
- 4,225
Fixed the decay bone animation and also used the icon you have provided, thanks!PLZ see the "Decay Bone" of "Footman Alternate Helmet"... there is a helmet flying!(waiting for your update
And plz use the icon of Footman Alternate Helmet above.
- Joined
- Sep 29, 2021
- Messages
- 16
