Revive Hero Win

[Gogetakao]

Ok i am working on a animie project and want a triger regarding reviving my hero to a region or base after he dies instantly and a win conditon that will be killing 150 heros a team will win the match forgive my english and forgive the thing if this was the wrong section guide me if i did something wrong or if it violates your policy happy map editing everyone

 

[Rheiko]

Revive Hero

• Events
  • Unit - A unit dies
• Conditions
  • ((Triggering unit) is a hero) equal to True
• Actions
  • Hero - Revive (Triggering unit) at YourRegion

Win

• Events
  • Unit - A unit dies
• Conditions
  • ((Killing unit) is a hero) equal to True
• Actions
  • Set IntegerVariable = (IntegerVariable + 1)
  • If (Conditions) then (Actions) else (Actions):
    • Conditions:
      • IntegerVariable greater than or equal to 150
    • Then:
      • Victory YourPlayer (Shows dialogs, Show scores)
    • Else:

something like that, i'm too lazy to write it all for you
at the first trigger use if then else to revive him at specific region
for the second trigger, make the integervariable into an array

 

[Binsu]

For Revive, you can try this:

• Trigger
  • Events
    • Unit - A unit Dies
  • Conditions
  • Actions
    • Hero - Instantly revive (Dying unit) at (Center of >>Your Region<<), >>Hide or Show<< revival graphics

EDIT: I am so slow...

 

[Gogetakao]

a unit dies whenever i do a unit dies i cant set it as event the ok button wont activate only help me please

 

[Binsu]

a unit dies whenever i do a unit dies i cant set it as event the ok button wont activate only help me please

It should be a Generic Unit event not Specfic Unit.

 

[Rheiko]

right click at the event, choose Unit - Generic Unit Events, then choose a unit dies
click ok..

 

[Lender]

a unit dies whenever i do a unit dies i cant set it as event the ok button wont activate only help me please

Use generic unit event instead of specific unit event

BTW if non hero units will exist in the game add

((dying unit)is a hero) equals true

To rheikos trigger as well

If there won't be any non hero unit then u don't need any condition

And if it's a PvP map u might want to count kills / teams separately

 

[Gogetakao]

ah you guys are so good i love you all thanks for help
how to count kills/team separatly can u give me trigger for that too you see i am completly new to this forums
and yea thanks that genric unit worked and the region i want to set 2 team team 1 base region team 2 base region and if team 1 hero dies he reives in team 1 base and team 2 unit dies he revives at team 2 base

 

[Rheiko]

you are welcome

 

[Lender]

ah you guys are so good i love you all thanks for help
how to count kills/team separatly can u give me trigger for that too you see i am completly new to this forums

Well use if then else block the clarify which teams unit scored
Use array for the kill count integers

Like: if owner of killing unit is a friend of (any player from team1) then increment killcountinteger[1] and so on..

 

[Rheiko]

lender, i know that.. just change it lol

Trigger1

• Events
  • Unit - A unit Dies
• Conditions
  • ((Triggering unit) is A Hero) Equal to True
• Actions
  • For each (Integer A) from 1 to 5, do (Actions)
    • Loop - Actions
      • For each (Integer B) from 6 to 10, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Owner of (Triggering unit)) Equal to (Player((Integer A)))
            • Then - Actions
              • Hero - Instantly revive (Last created unit) at YourAPoint, Show revival graphics
            • Else - Actions
              • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                • If - Conditions
                  • (Owner of (Triggering unit)) Equal to (Player((Integer B)))
                • Then - Actions
                  • Hero - Instantly revive (Last created unit) at YourBPoint, Show revival graphics
                • Else - Actions

Trigger2

• Events
  • Unit - A unit Dies
• Conditions
  • ((Killing unit) is A Hero) Equal to True
  • ((Triggering unit) is A Hero) Equal to True
• Actions
  • Set IntegerVariable[(Player number of (Owner of (Killing unit)))] = (IntegerVariable[(Player number of (Owner of (Killing unit)))] + 1)
  • For each (Integer A) from 1 to 5, do (Actions)
    • Loop - Actions
      • For each (Integer B) from 6 to 10, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • IntegerVariable[(Integer A)] Greater than or equal to 150
            • Then - Actions
              • Game - Victory Player 1 (Red) (Show dialogs, Show scores)
            • Else - Actions
              • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                • If - Conditions
                  • IntegerVariable[(Integer B)] Greater than or equal to 150
                • Then - Actions
                  • Game - Victory Player 6 (Orange) (Show dialogs, Show scores)
                • Else - Actions

pick the player first then victory condition, i'm too lazy to do that lol

 

[Gogetakao]

lender, i know that.. just change it lol

Trigger1

• Events
  • Unit - A unit Dies
• Conditions
  • ((Triggering unit) is A Hero) Equal to True
• Actions
  • For each (Integer A) from 1 to 5, do (Actions)
    • Loop - Actions
      • For each (Integer B) from 6 to 10, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Owner of (Triggering unit)) Equal to (Player((Integer A)))
            • Then - Actions
              • Hero - Instantly revive (Last created unit) at YourAPoint, Show revival graphics
            • Else - Actions
              • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                • If - Conditions
                  • (Owner of (Triggering unit)) Equal to (Player((Integer B)))
                • Then - Actions
                  • Hero - Instantly revive (Last created unit) at YourBPoint, Show revival graphics
                • Else - Actions

Trigger2

• Events
  • Unit - A unit Dies
• Conditions
  • ((Killing unit) is A Hero) Equal to True
  • ((Triggering unit) is A Hero) Equal to True
• Actions
  • Set IntegerVariable[(Player number of (Owner of (Killing unit)))] = (IntegerVariable[(Player number of (Owner of (Killing unit)))] + 1)
  • For each (Integer A) from 1 to 5, do (Actions)
    • Loop - Actions
      • For each (Integer B) from 6 to 10, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • IntegerVariable[(Integer A)] Greater than or equal to 150
            • Then - Actions
              • Game - Victory Player 1 (Red) (Show dialogs, Show scores)
            • Else - Actions
              • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
                • If - Conditions
                  • IntegerVariable[(Integer B)] Greater than or equal to 150
                • Then - Actions
                  • Game - Victory Player 6 (Orange) (Show dialogs, Show scores)
                • Else - Actions

pick the player first then victory condition, i'm too lazy to do that lol

hey can u tell me were are if conditon (the conditon in if command u entered with pictures please and if action and else actions please) like which type of commands are they thank ya
(Owner of (Triggering unit)) Equal to (Player((Integer A)))
integer a i cannot find were is integer a in that

 

[Rheiko]

ah i don't know what are you talking about, lol
which if then else? the first or second trigger?
(Owner of (Triggering unit)) Equal to (Player((Integer A))) you can find this
convert player index to player -> player(1)
replace 1 with "for loop integer A"

OT

You remind me to my past self, when i was looking for an answer at thehelper.net
but i didn't asking, just keep looking for it until i found it

 

[Gogetakao]

ah i don't know what are you talking about, lol
which if then else? the first or second trigger?
(Owner of (Triggering unit)) Equal to (Player((Integer A))) you can find this
convert player index to player -> player(1)
replace 1 with "for loop integer A"

OT

You remind me to my past self, when i was looking for an answer at thehelper.net
but i didn't asking, just keep looking for it until i found it

rep up for ya thanks u are too much user friendly keep good job up bud

Sad the trigger 1 u showed when i test that my war3 crashes lol

 

[Rheiko]

ups, change the last created unit into triggering unit
my fault >.<

 

[Gogetakao]

woot it worked and what if i want 3 seconds delay and when my hero revive my camera or screen comes straight to the hero like dota?

 

[Rheiko]

before Hero - Revive hero.. use "Wait 3 seconds"
after Hero - Revive hero.. use

• Camera - Pan camera as necessarily...

 

[Gogetakao]

before Hero - Revive hero.. use "Wait 3 seconds"
after Hero - Revive hero.. use

• Camera - Pan camera as necessarily...

triger 1 integer b do not revive that is player hero from 6 to 10 do not revive

 

[Rheiko]

nah, i don't know that one..
i didn't test it
lol

but there is another way to do it though

 

[Gogetakao]

nah, i don't know that one..
i didn't test it
lol

but there is another way to do it though

well i think creating a whole new triger for integer b?

 

[Daffa]

after Hero - Revive hero.. use

• Camera - Pan camera as necessarily...

good, that function will desync the map automatically.
don't use it.

I recommend use Pan Camera or the timed one instead.

 

[Rheiko]

i just know that D:

 

[Daffa]

function SmartCameraPanBJ takes player whichPlayer, location loc, real duration returns nothing
    local real dist
    if (GetLocalPlayer() == whichPlayer) then
        // Use only local code (no net traffic) within this block to avoid desyncs.

        set dist = DistanceBetweenPoints(loc, GetCameraTargetPositionLoc())
        if (dist >= bj_SMARTPAN_TRESHOLD_SNAP) then
            // If the user is too far away, snap the camera.
            call PanCameraToTimed(GetLocationX(loc), GetLocationY(loc), 0)
        elseif (dist >= bj_SMARTPAN_TRESHOLD_PAN) then
            // If the user is moderately close, pan the camera.
            call PanCameraToTimed(GetLocationX(loc), GetLocationY(loc), duration)
        else
            // User is close enough, so don't touch the camera.
        endif
    endif
endfunction

Blizzard failed here [AFAIR] : if (GetLocalPlayer() == whichPlayer)
EDIT :
Blizzard actually failed here [by PurgeandFire - credits to him] : set dist = DistanceBetweenPoints(loc, GetCameraTargetPositionLoc())

 

[Gogetakao]

Thanks daffa and one more thing what is the trigger for enabling rain at a particular region please write it full

 

[nhocklanhox6]

before Hero - Revive hero.. use "Wait 3 seconds"
after Hero - Revive hero.. use

• Camera - Pan camera as necessarily...

Don't use Wait

 

[Daffa]

You may use wait with locals or triggering unit.
but if possible, yes, it should be avoided at all costs

 

[nhocklanhox6]

I think use wait when the game end, it much better , anyway: You like boboboy already 0.0

 

[Rheiko]

boboiboy sure is famous xD

 

[FUJI]

I don't know why just don't use this ?
Demo Code Only some things are not needed in this.
Team 1:

• T1
  • Events
    • Unit - A unit owned by Player 1 (Red) Dies
    • Unit - A unit owned by Player 3 (Teal) Dies
    • Unit - A unit owned by Player 5 (Yellow) Dies
    • Unit - A unit owned by Player 7 (Green) Dies
    • Unit - A unit owned by Player 10 (Light Blue) Dies
  • Conditions
    • ((Dying unit) is A Hero) Equal to True
    • ((Dying unit) has an item of type Ankh of Reincarnation) Equal to False
  • Actions
    • If ((Owner of (Killing unit)) Not equal to Neutral Hostile) then do (Game - Display to (All players) for 4.00 seconds the text: ((Name of (Owner of (Killing unit))) + ( |cffff0000Defeats|r + (Name of (Owner of (Triggering unit)))))) else do (Game - Display to (All players) the text: ((Name of (Owner of (Triggering unit))) + Dies To Creeps))
    • Wait 25.00 seconds
    • Hero - Instantly revive (Dying unit) at (Center of Ally <gen>), Show revival graphics
    • Animation - Change (Dying unit) flying height to (Default flying height of (Dying unit)) at 0.00
    • Unit - Reset ability cooldowns for (Dying unit)

Team2:

• T2
  • Events
    • Unit - A unit owned by Player 2 (Blue) Dies
    • Unit - A unit owned by Player 4 (Purple) Dies
    • Unit - A unit owned by Player 6 (Orange) Dies
    • Unit - A unit owned by Player 8 (Pink) Dies
    • Unit - A unit owned by Player 11 (Dark Green) Dies
  • Conditions
    • ((Dying unit) is A Hero) Equal to True
    • ((Dying unit) has an item of type Ankh of Reincarnation) Equal to False
  • Actions
    • If ((Owner of (Killing unit)) Not equal to Neutral Hostile) then do (Game - Display to (All players) for 4.00 seconds the text: ((Name of (Owner of (Killing unit))) + ( |cffff0000Defeats|r + (Name of (Owner of (Triggering unit)))))) else do (Game - Display to (All players) the text: ((Name of (Owner of (Triggering unit))) + Dies To Creeps))
    • Wait 25.00 seconds
    • Hero - Instantly revive (Dying unit) at (Center of Enemy <gen>), Show revival graphics
    • Animation - Change (Dying unit) flying height to (Default flying height of (Dying unit)) at 0.00
    • Unit - Reset ability cooldowns for (Dying unit)

I tried this reviving my heroes and seems working properly.

 

[Daffa]

Dying unit will get overwritten on next run.
This will bug up the revival.

 

[TriggerHappy]

Dying unit will get overwritten on next run.
This will bug up the revival.

Can be avoided with local variables afaik;

• Revive
  • Events
    • Unit - A unit owned by Player 1 (Red) Dies
  • Conditions
    • ((Dying unit) is A Hero) Equal to True
    • ((Decaying unit) has an item of type Ankh of Reincarnation) Equal to True
  • Actions
    • Custom script: local unit u = GetDyingUnit()
    • Wait 25.00 seconds
    • Custom script: set udg_Hero = u
    • Hero - Instantly revive Hero at (Center of (Playable map area)), Hide revival graphics
    • Custom script: set u = null

 

[FUJI]

Dying unit will get overwritten on next run.
This will bug up the revival.

What do you mean bug???
The dying unit nor triggering unit is still the same.
This Is MPI, Expecting MUI, Test it tho .

EDIT:

I did test it in my map and it works properly even multiple times of heroes dies.

 

[Daffa]

Funny, as I recall only Triggering Unit is local, the rest aren't.

 

[Rheiko]

jakeZinc, could you please post your test map. i wonder whether your test map is the problem or our deduction is wrong?

• Events
  • Unit - A unit Dies
• Conditions
• Actions
  • Wait - Wait 10 seconds
  • Unit - Create 1 ((Unit-type) of (Dying unit)) at (Center of (Playable map area) facing default building facing

try to kill two units, then see..
if only one unit get revived, then it is not MUI/MPI
you can use debug though
i don't try this yet, it is better if you show us it is working or not

 

[FUJI]

I can't show you because it is in my map. I've tested it and It is MPI, but not MUI, shadowing globals will help like TriggerHappy Suggested triggers, The events specification is player by player.

 

[Rheiko]

yeah shadowing globals will do.. but i still wondering that dying unit thing