Closed

SIR.POOPSALOT · Oct 27, 2004

u did i dont have it

SIR.POOPSALOT · Oct 27, 2004

well if you did email me i havent got it and i wouldnt mind you adding it to this site and removing it

Damnations_Feet · Oct 27, 2004

Make a fu#$'n better facehugger already ya lazy bum

SIR.POOPSALOT · Oct 27, 2004

gzz calm down he said earlier he couldn't make one he said it was to tuff for him

Insane llama · Oct 27, 2004

Okay Konblade just wondering if you could make those models i asked for if you don't remember I would like the scottish palidan with tartan skirt and the shield with a beer mug on it with beer comming out of the top and the old voodoo witch she is very ugly looking and hovers around and has one little oye and one big eye! and inadvance thanks!

SaPheRY · Oct 27, 2004

http://www.wc3sear.ch/viewtopic.php?t=6219

Konblade are u able to make a trade cart?

if not can u make sumthing that resembles or could be used as a trade cart

Konblade · Oct 27, 2004

Okay, I'll submit the catapult, and start working on the witch. The beer part of the paladin is kinda too difficult, sorry about that. acolyteofdoom, I've tried talking to you, but you don't care. You hate me for something I don't even remember, and you think I've been copying you, but I haven't. Please either post a request or stop posting here.

acolyteofdoom · Oct 27, 2004

Youve tried talking to me? When was this? All you have said to me was "OMFGS LEAVE MY P0oR WARMILL AT BAY!!!1!!111!! DO NOT HARMS ME!!!1!!!111111!!!"

You started this all, I hope you know. Anyone who wants to see can go to pg 7 of this thread.

Go get AIM, so we dont waste anymore of the sites space. s/n is acolyteofdoom06.

Konblade · Oct 27, 2004

I had sent you a PM about 3 weeks ago, and before to try and talk things out. Please make a request or stop posting the thread with insults.

SaPheRY · Oct 27, 2004

SaPheRY said:
http://www.wc3sear.ch/viewtopic.php?t=6219

Konblade are u able to make a trade cart?

if not can u make sumthing that resembles or could be used as a trade cart

so konblade is that a yes?

Konblade · Oct 27, 2004

Yes, it is. I'll handle it.

Kerrigan · Oct 27, 2004

konblade - why do you even have a damn modelling thread of your own if you give up on models??

im pissed because of what you said "I've tried, its too hard". to me, you are no longer a good modeller.

"Never give up, never surrender!" - Dont you learn from movies?
"It's off to the movies that we will go, where we learn everything that we know."

SIR.POOPSALOT · Oct 28, 2004

Well i havent reciaved that emial but could you just post it on this site for a bit then remove it plz

Inuyasha5000 · Oct 28, 2004

I would like a cinder model from cel-damage
attack1,a big chainsaw slices horizontaly
attack2, a mechine gun shoots in front of cinder
walk,6 wheels,3 on each side move in any direction

SaPheRY · Oct 28, 2004

Konblade said:
Yes, it is. I'll handle it.

thnx man

Damnations_Feet · Oct 28, 2004

How's a face hugger to hard for you? >.> you just give a f$^@'n spider a tail and 2 butts instead of one... is that really to hard?

SaPheRY · Oct 28, 2004

why are u such an Assh*le :S

SIR.POOPSALOT · Oct 29, 2004

yaa dude you should like lay off if he cant do it ha cant do it deal with it y are you so pissy at everyone you should calm down o and konblade y havent you posted it i havent got your email or anything can you put it on this site so i can get it plz i need it for my map

Damnations_Feet · Oct 29, 2004

*Edit*
Ok i dun wanna get kicked agen, cuz.. that sucked.. anywase, why dont you kind sirs Shut your moughs and respect my right to request, dont make me start diss'n your crappy humanoid generic requests.

Kerrigan · Oct 29, 2004

actually damnation is quite right. konblade has obviously become frustrated or annoyed with modelling, and is "resigning".

correct me if im wrong konblade

Damnations_Feet · Oct 29, 2004

Rather true rather true, his first attempt walked sideways for godsake.

SIR.POOPSALOT · Oct 29, 2004

ok you guys may be right im just going drop out little conversasion of this now and not get involved in anymore of this. srry if i got on ppls nerves :? :? :? :?

Modeler · Oct 31, 2004

...

acolyteofdoom said:
Konblade said:

I'm flooded right now, ask acolytepfdoom. He handles 2 minute requests.

Click to expand...

Lol, 2 minute requests? I think everything you have a elf head! Or a peon have new anims! Rate me a 5! Yes, I did some of them for people, but I didnt waste the sites space by submitting something one or two people will use. Think before you talk. Also, ever done has been a 2 minute request. Hmm.. all those head switches you submitted? And all those animation transfers? Wow, you can make a bandit have why the hell did you call this a modeling warmill? This isnt real modeling and you know it. At least I have enough decency to tell people what Im really doing and not pretend that Im doing something else. And you didnt even spell my name right.

Your lucky, my boss cant even remember my name.
You dont do two minute requests, yop do one and a half minute requests. acolytepfdoom just stop posting here, welcome back to earth konblade -_-

acolyteofdoom · Nov 1, 2004

wow you actually read about 5 pages of a request thread just to get to that... just wow... someone needs a hobby other than sitting there reading month old threads... :roll:

Rising Evil · Nov 1, 2004

I need a mounted cavalier(hero and non-hero)
and a unmounted cavalier(^^Same)
If possible make it in the ame MDX like Illidan is(with morph animations)
A Cavalier Is a Lightly armored horse rider(normaly w/ spear)

-Thank You

Damnations_Feet · Nov 2, 2004

are you alive?

Konblade · Nov 2, 2004

Yes, I'm working on requests.

Akroma_LoA · Nov 2, 2004

Alrighty, Konblade,

After letting Modeler take a whack at this project (and failing :cry:

) I've decided to ask you. :?

The project is a Model (along with a skin, if need-be) of a Young-Adult female villiager. Modeler tried using Jaina's head, but after removing her cape, found it would be very hard to finish the second half of her head...

This time I propose geomerging the Sorceress' Head onto a Male Villiager (white shirt), then... toning down her arms, make the skin color similar to her face, and doing anything within your grasp to make her chest seem feminine...

Some points to be aware of:
- After some consideration, I think leaving her legs just like the Male Villiager's should be fine.
- Her upper body is very important. Perhaps make her stomach thinner than the Male's, and her breasts, however perverted it may sound, are important - It wouldn't be much of a female model without something to stare at!

- The Male Villagers hands (he wears gloves doesn't he?) can stay as-is on the Female Model.
- Lastly, incase you were wondering. No, she should not have a weapon. No, do NOT add or remove any stances/actions. The male's actions should look fine on her. And, Yes, you will get loads of credit in my map series.

Ahh, P.S. - Don't leave the male Portrait... Either leave it with no portrait, or make a new one. If you like this project, and want to make one, go for it! That'd be great!

Konblade · Nov 3, 2004

Okay, expect it on Saturday, because of other requests and my computer have some trouble with gmax.

Akroma_LoA · Nov 3, 2004

Great!

I wish you luck in modeling it!

I also found out that it would come in very handy for any LoaP mappers... Considering they use very out-of-place models.

ManZero · Nov 3, 2004

can you do this request http://www.wc3sear.ch/viewtopic.php?p=40384?

Konblade · Nov 4, 2004

I'll try, but no garentees.

Kerrigan · Nov 4, 2004

do or do not
there is no try

Final_Fantasies-7 · Nov 4, 2004

ok my request:

Model: Kuja from FF9(will get a pic for you)

Anims: Stand: normal stand anim
Atack 1: kinda like the boold mages attack one
Atack 2: should spin around and shoot a massive flare, again like the blood mages

Spell: should just toss is right hand out and shoot somthing

Spell Chan: should bring his right hand up and charge the spelll

Death: should just fall down and disapate

that is my request, and if you ever did that shadow the hedgehog request from mr. clean i would like to get that my email is:

[email protected]

EDIT: I also need a very good artic wold model, only needs a stand1: sitting up, and a stand read: normal standing, a walk: dur, and a attack: claws? mouth? dont care?

Konblade · Nov 4, 2004

Sorry ask later. I'm swamped right now.

Akroma_LoA · Nov 4, 2004

Hmm, I kinda like ManZero's request. After all, Using a skin on them wouldn't be very hard, and the model itself being soo small on the surface of the map...

Nevermind... :roll:

As for FF7's request. I'd assume the "animations" are one of the hardest parts of modeling, and in all probability, just making a decent kuja model, and shoving the Blood Mage's animaions onto it would look fine.

Seriously; the Kuja model itself seems like it'd be quite a job... and you didn't specify whether you wanted normal or Trance. 8)

You're a horrible requester! lol

ManZero · Nov 4, 2004

just a comment about my request:
you may make many models intead of one whith many animations, but I preffer the one that results in lower size =)

Final_Fantasies-7 · Nov 4, 2004

i dont need it in the near future just whenever you can, and it needs a morph anim so he can become trans kuja, and i guess that model will be needed to :\, whenever you can get around to it will be fine, i dont care cuz i wont need it for my rpg for a while cuz it will be the final quest wich will be in final version

Inuyasha5000 · Nov 6, 2004

Post THe cinder model in the models section.[/hah kitty.img]

Modeler · Nov 6, 2004

...

Koblade, could you make water where its placable as a unit/doodad so units can walk in it? That would be cool

Akroma_LoA · Nov 7, 2004

Darn.

The end of Saturday has come, and my request isn't finished yet, lol. Ahh well, patience is a trait I happen to have!

PEONMASTER · Jan 8, 2005

Logger Models Please?

Hello, I would like some models of loggers and logging machines. I want the logger to be with high logger boots, a chainsaw, chainsaw chaps if possible and a helmut. If he had suspenders that would be good also. If you don't know what everything looks like I'll tell you: The chaps are made of Kevlar and are orange. They wrap around most of the way in the front and have straps that go around. The boots are usally high heals and come up about 1 foot. The helmut is orange and has a screen visor in front. It would be good if the chainsaw was about 3 feet long. This may be hard to do, but if possible, he could have a few animations. One of them would be "Harvest", and that should be kneeling down and sawing about a foot off the ground. The second one would be "Attack", and would be either swinging it or sawing in the air at the opponent. As for the machines, they are hard to desrcibe, so I'll give you a picture. Here's a simuated digital picture of one: http://www.cm-labs.com/customers/Simlog/forwarder-sim1.jpg The machine should have some logs in the back. Another easy model is a log (just a tree laying on the ground, without all the branches and stuff). These models are really important to me so I hope you can do it. My email is [email protected]. You can email me and tell me if you will do it and I can send you more pictures and stuff like that.

Otherwise I'm doing VERY well on the map.

PEONMASTER

Closed

Similar threads