[General] Building Pathing Problem

[madman9800]

I am using these wall models (all 4 of them)

http://www.hiveworkshop.com/forums/models-530/woodwall90-139355/?prev=status=p&u=Mephestrial

I am not sure how i can make these buildings...

I made the horizontal one using the "0 degrees" model by setting the pathing to "fence"

However when i try to make a verticle wall with the "90 degrees" model, the model ends up being verticle but the buildings PATHING is still horizontal. I even tried setting the pathing to "gate VERTICLE" but its still a horizontal pathing.

How can i make a building have a verticle pathing?

 

[Pharaoh_]

http://www.hiveworkshop.com/forums/1520810-post2.html

 

[madman9800]

WOW it worked! One problem the "gate pathing" you provided me with is far too THICK and a little too long for the wall size i have. (i do not want to make the walls bigger)

Is there anyway i can resize this pathing to be maybe 2 blocks shorter and 1 block thin (instead of 2 blocks)?

Thanks again Pharaoh_!

 

[Pharaoh_]

If you have Photoshop, you can edit it ;]

 

[madman9800]

I remember skinning a long time ago, there are instructions on doing stuff with the alpha channel and such...is there any instructions on how exactly i can make this 4x1 instead of the big hunk it is now? (i want it the same size as the fence pathing)

If you could give me more detailed info i'd really appreciate it man.

btw...did you JUST change your icon?

 

[Pharaoh_]

http://www.hiveworkshop.com/forums/general-mapping-tutorials-278/pathing-everything-about-154558/#p7

And no, I did not