• Check out the results of the Techtree Contest #19!
  • Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.
  • Create a void inspired texture for Warcraft 3 and enter Hive's 34th Texturing Contest: Void! Click here to enter!
  • The Hive's 22nd Icon Contest: Creep Abilities is now concluded, time to vote for your favourite set of icons! Click here to vote!

[Trigger] Attacked setting

Status
Not open for further replies.

nightwalkerg

nightwalkerg

nightwalkerg

Level 3
Joined
Mar 28, 2010
Messages
42
  • Frostmourne Attacked
    • Events
      • Unit - A unit Is attacked
    • Conditions
      • (Level of Frostmourne for (Attacking unit)) Greater than or equal to 1
      • ((Owner of (Attacked unit)) is an enemy of (Owner of (Attacking unit))) Equal to True
    • Actions
      • Set FrostSwordAttacking = (Attacking unit)
      • Wait 0.20 seconds
      • Unit - Remove FrostSwordAbility[FrostSwordCount] from FrostSwordAttacking
      • Set FrostSwordCount = (Level of Frostmourne for FrostSwordAttacking)
      • Trigger - Turn off (This trigger)
      • Wait (14.00 - (2.00 x (Real((Level of Frostmourne for FrostSwordAttacking))))) seconds
      • Trigger - Turn on (This trigger)
      • Unit - Add FrostSwordAbility[FrostSwordCount] to FrostSwordAttacking
i wan make it after attack not before attack><
this trigger will run when that unit haven't take damages...==
how to solve???
sorry for my english...i'm from malaysia
 
You can't turn off and then try to turn it back on in the same trigger. Make another trigger and have that turn on after you turn this one off, then in the new trigger make it do everything after Trigger - Turn off (This Trigger), then turn the new trigger off after it does all it's actions.
 
13oot-Me said:
You can't turn off and then try to turn it back on in the same trigger. Make another trigger and have that turn on after you turn this one off, then in the new trigger make it do everything after Trigger - Turn off (This Trigger), then turn the new trigger off after it does all it's actions.
Click to expand...

but it work...><
it can be turn on after the trigger is turn off....
 
13oot-Me said:
Why are you turning it off in the first place? You have a wait there, so the trigger won't do anything until that waiting period is over.
Click to expand...

oo...that mean i remove the turn off trigger still can work???coz i wanna make like dota kunkka tidebringer...><
and the problem is...this trigger will run before the unit take damages...i wan make it work after the unit take damages...
 
1) 13oot-me, triggers can be turned on and off in a single trigger. Turning on and off only disabled and enables the trigger from triggering AGAIN, the current evaluation will not be affected. This means that turning off, waiting and turning on again is a sort of cooldown (not to mention the MUI stuff, but it works).
2) mckill is right. There would be another possibility. There is a system out there that registers attack events and calculates the missile/animation speed for each model individual. Afterwards you get a new attack event that triggers nearly correct. However, I don't know where it was :x
 
It's easy to use it, it's GUI.

  • Frostmourne Attacked
    • Events
      • Game - DamageEvent becomes Equal to 1.00
    • Conditions
      • (Level of Frostmourne for DamageEventSource) Greater than or equal to 1
      • ((Owner of DamageEventTarget) is an enemy of (Owner of DamageEventSource)) Equal to True
    • Actions
      • Set FrostSwordAttacking = DamageEventSource
      • Wait 0.20 seconds
      • Unit - Remove FrostSwordAbility[FrostSwordCount] from FrostSwordAttacking
      • Set FrostSwordCount = (Level of Frostmourne for FrostSwordAttacking)
      • Trigger - Turn off (This trigger)
      • Wait (14.00 - (2.00 x (Real((Level of Frostmourne for FrostSwordAttacking))))) seconds
      • Trigger - Turn on (This trigger)
      • Unit - Add FrostSwordAbility[FrostSwordCount] to FrostSwordAttacking
Just copy & paste the Unit Indexer trigger and the Damage Event trigger from the demo map here: https://www.hiveworkshop.com/forums/spells-569/damage-event-1-0-0-0-a-201016/
 
Bribe said:
It's easy to use it, it's GUI.

  • Frostmourne Attacked
    • Events
      • Game - DamageEvent becomes Equal to 1.00
    • Conditions
      • (Level of Frostmourne for DamageEventSource) Greater than or equal to 1
      • ((Owner of DamageEventTarget) is an enemy of (Owner of DamageEventSource)) Equal to True
    • Actions
      • Set FrostSwordAttacking = DamageEventSource
      • Wait 0.20 seconds
      • Unit - Remove FrostSwordAbility[FrostSwordCount] from FrostSwordAttacking
      • Set FrostSwordCount = (Level of Frostmourne for FrostSwordAttacking)
      • Trigger - Turn off (This trigger)
      • Wait (14.00 - (2.00 x (Real((Level of Frostmourne for FrostSwordAttacking))))) seconds
      • Trigger - Turn on (This trigger)
      • Unit - Add FrostSwordAbility[FrostSwordCount] to FrostSwordAttacking
Just copy & paste the Unit Indexer trigger and the Damage Event trigger from the demo map here: https://www.hiveworkshop.com/forums/spells-569/damage-event-1-0-0-0-a-201016/
Click to expand...

ermmm ~i try it now~thx for help><

it is work!!!
thx Bribe...love u so much><''''
muacks~~~
thanks you><

erm...i use this code on another skill too...when attacking a unit...war3 will auto closed--...what happen on it???><
 
Last edited by a moderator:
War3 closes because you create infinite loop (trigger that reacts on event DamageEvent deals other damage).
Use simple action what Bribe has shwon to prevent that issue from happening.

Do like written above, change nothing, and yes 'Turn on the DamageEvent' (DamageEvent is the trigger) - meaby Bribe did small mistake writing additional word 'Trigger'.
 
I made no mistake there is a trigger variable called DamageEventTrigger ;)

@nightwalkerg yes on the second trigger you made that causes the game to crash, you are probably doing a "Unit - Damage Target" thing from that trigger. Just enable/disable the trigger (like I showed you) so that it doesn't detect that extra damage and cause an infinite loop.
 
Spinnaker said:
War3 closes because you create infinite loop (trigger that reacts on event DamageEvent deals other damage).
Use simple action what Bribe has shwon to prevent that issue from happening.

Do like written above, change nothing, and yes 'Turn on the DamageEvent' (DamageEvent is the trigger) - meaby Bribe did small mistake writing additional word 'Trigger'.
Click to expand...

  • Frostmourne Attacked
    • Events
      • Game - DamageEvent becomes Equal to 1.00
    • Conditions
      • (Level of Frostmourne for DamageEventSource) Greater than or equal to 1
      • ((Owner of DamageEventTarget) is an enemy of (Owner of DamageEventSource)) Equal to True
    • Actions
      • Trigger - Turn Off DamageEventTrigger
      • Set FrostSwordAttacking = DamageEventSource
      • Wait 0.20 seconds
      • Unit - Remove FrostSwordAbility[FrostSwordCount] from FrostSwordAttacking
      • Set FrostSwordCount = (Level of Frostmourne for FrostSwordAttacking)
      • Trigger - Turn off (This trigger)
      • Wait (14.00 - (2.00 x (Real((Level of Frostmourne for FrostSwordAttacking))))) seconds
      • Trigger - Turn on (This trigger)
      • Unit - Add FrostSwordAbility[FrostSwordCount] to FrostSwordAttacking
      • Trigger - Turn On DamageEventTrigger
like this for each trigger i wan to add this code???
 
@nightwalkerg:

Bribe said:
I made no mistake there is a trigger variable called DamageEventTrigger ;)

@nightwalkerg yes on the second trigger you made that causes the game to crash, you are probably doing a "Unit - Damage Target" thing from that trigger. Just enable/disable the trigger (like I showed you) so that it doesn't detect that extra damage and cause an infinite loop.
Click to expand...

Don't change the first trigger, it's the second trigger where you have the problem. Please post the trigger here so I can show you exactly what I meant.
 
  • StrikeBlade
    • Events
      • Unit - A unit Is attacked
    • Conditions
      • (Level of StrikeBlade for (Attacking unit)) Greater than or equal to 1
      • ((Owner of (Attacked unit)) is an enemy of (Owner of (Attacking unit))) Equal to True
    • Actions
      • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
        • If - Conditions
          • ((Attacked unit) is A structure) Equal to True
        • Then - Actions
        • Else - Actions
          • Unit - Cause (Attacking unit) to damage (Attacked unit), dealing ((Max life of (Attacked unit)) x ((Real((Level of StrikeBlade for (Attacking unit)))) x 0.01)) damage of attack type Spells and damage type Normal
          • Special Effect - Create a special effect attached to the chest of (Attacked unit) using Objects\Spawnmodels\Critters\Albatross\CritterBloodAlbatross.mdl
  • SavageStrike
    • Events
      • Unit - A unit Is attacked
    • Conditions
      • (Level of SavageStrike for (Attacking unit)) Greater than or equal to 1
      • ((Owner of (Attacked unit)) is an enemy of (Owner of (Attacking unit))) Equal to True
    • Actions
      • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
        • If - Conditions
          • ((Attacked unit) is A structure) Equal to True
        • Then - Actions
        • Else - Actions
          • Unit - Cause (Attacking unit) to damage (Attacked unit), dealing ((Real((Strength of (Attacking unit) (Include bonuses)))) x ((Real((Level of SavageStrike for (Attacking unit)))) x 0.10)) damage of attack type Normal and damage type Normal
Except frostmourne's trigger, i wanna use on this two trigger and more....
 
You'd want to change those as follows:

  • StrikeBlade
    • Events
      • Game - DamageEvent becomes Equal to 1.00
    • Conditions
      • (Level of StrikeBlade for DamageEventSource) Greater than or equal to 1
      • ((Owner of DamageEventTarget) is an enemy of (Owner of DamageEventSource)) Equal to True
    • Actions
      • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
        • If - Conditions
          • (DamageEventTarget is A structure) Equal to True
        • Then - Actions
        • Else - Actions
          • Trigger - Turn Off DamageEventTrigger
          • Unit - Cause DamageEventSource to damage DamageEventTarget, dealing ((Max life of DamageEventTarget) x ((Real((Level of StrikeBlade for DamageEventSource))) x 0.01)) damage of attack type Spells and damage type Normal
          • Trigger - Turn On DamageEventTrigger
          • Special Effect - Create a special effect attached to the chest of DamageEventTarget using Objects\Spawnmodels\Critters\Albatross\CritterBloodAlbatross.mdl
          • Special Effect - Destroy (Last created special effect)
  • SavageStrike
    • Events
      • Game - DamageEvent becomes Equal to 1.00
    • Conditions
      • (Level of SavageStrike for DamageEventSource) Greater than or equal to 1
      • ((Owner of DamageEventTarget) is an enemy of (Owner of DamageEventSource)) Equal to True
    • Actions
      • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
        • If - Conditions
          • (DamageEventTarget is A structure) Equal to True
        • Then - Actions
        • Else - Actions
          • Trigger - Turn Off DamageEventTrigger
          • Unit - Cause DamageEventSource to damage DamageEventTarget, dealing ((Real((Strength of DamageEventSource (Include bonuses)))) x ((Real((Level of SavageStrike for DamageEventSource))) x 0.10)) damage of attack type Normal and damage type Normal
          • Trigger - Turn On DamageEventTrigger
 
Status
Not open for further replies.

Similar threads

Spinningcresent
  • Locked
[Trigger] Immolation
Replies
6
Views
5K
Spinningcresent
Spinningcresent
Shanghai
  • Locked
this trigger i want unit to attack not attacked :S
Replies
11
Views
1K
Serbianbeast
Serbianbeast
Chief-Oblivion
  • Locked
[Trigger] Will this leak..?
Replies
8
Views
1K
Chief-Oblivion
Chief-Oblivion
Null
  • Locked
Combat Camera effects when attacked
Replies
4
Views
1K
Uncle
Uncle
dm251
  • Locked
[Trigger] Help me with a AutoSpell....
Replies
4
Views
1K
LightBloOD
LightBloOD
Back
Top