[Trigger] Repick and Random command problem

jokerman10000 · Dec 7, 2010

Hey,
i make a map named War of Wrath
but i have a problem:
the repick command works but i made it so that you have a whisp and klick on the hero (the hero is on the ground) with rightklick and you have him and the whisp is down
the same with ar all whisps are away then.
The problem is when i type repick the hero is away and i will take a new but the whisp is away then
and when i type random you can take 2 heroes not only 1.. because whisp is there to take one

pls help me
when you want i send the map.. :goblin_cry:

priest170234 · Dec 7, 2010

I'll take a look.

jokerman10000 · Dec 7, 2010

i hope you can help me..

priest170234 · Dec 7, 2010

jokerman10000 said:
i hope you can help me..

Thats a big map.... I can only Try to help you. But usually I solve problems

jokerman10000 · Dec 7, 2010

the map isnt so big

only the music... i dont know how to make it smaller

jokerman10000 · Dec 7, 2010

second here is a map without that music
smaller

priest170234 · Dec 7, 2010

Okay, your map's system is complex..... It might take some time.. Gimme a few hours perhaps. And can you write out the problem again, in proper English?
Sorry, cause I still got problems understanding what you wrote in your description... I'm gonna sleep for now.

jokerman10000 · Dec 7, 2010

the problem is:
when i make ar or take a hero
the whisp is away then
when i make repick the hero is away but the whisp isnt there too..
when i make -random the whisp is there and can take a second hero.
and when i make -random the hero dont go away like in normal pick

better?

sPy · Dec 7, 2010

Try this:

Repick Command
- Events
  - Player - Player 1 (Red) types a chat message containing -repick as An exact match
  - Player - Player 2 (Blue) types a chat message containing -repick as An exact match
  - Player - Player 3 (Teal) types a chat message containing -repick as An exact match
  - Player - Player 4 (Purple) types a chat message containing -repick as An exact match
  - Player - Player 5 (Yellow) types a chat message containing -repick as An exact match
  - Player - Player 6 (Orange) types a chat message containing -repick as An exact match
  - Player - Player 7 (Green) types a chat message containing -repick as An exact match
  - Player - Player 8 (Pink) types a chat message containing -repick as An exact match
- Conditions
  - (Number of units in (Units owned by (Triggering player) matching (((Matching unit) is A Hero) Equal to True))) Equal to 1
  - PlayerRepicked[(Player number of (Triggering player))] Equal to False
- Actions
  - Game - Display to (All players) the text: (Playername[(Player number of (Triggering player))] + has repicked)
  - Custom script: set bj_wantDestroyGroup = true
  - Unit Group - Pick every unit in (Units owned by (Triggering player) matching (((Matching unit) is A Hero) Equal to True)) and do (Actions)
    - Loop - Actions
      - Player Group - Pick every player in (All players) and do (Actions)
        
        Loop - Actions
        
        Player - Make (Unit-type of (Picked unit)) Available for training/construction by (Picked player)
  - Set PlayerRepicked[(Player number of (Triggering player))] = True
  - Set PlayerRepickPos = (Center of heldenspawn <gen>)
  - Unit - Create 1 Wähler for (Triggering player) at PlayerRepickPos facing Default building facing degrees
  - Selection - Select (Last created unit) for (Triggering player)
  - Camera - Pan camera for (Triggering player) to PlayerRepickPos over 0.20 seconds
  - Custom script: call RemoveLocation(udg_PlayerRepickPos)

jokerman10000 · Dec 7, 2010

which variable is PlayerRepicked? and the variable Playerrepickedpos is point vaiable?
and how i shall make the random command that only the one who take it will be destroy?

but thx guy i gave rep

sPy · Dec 7, 2010

Q: Which variable is PlayerRepicked?
A: Boolean Array

Q: PlayerRepickedPos?
A: Point

jokerman10000 · Dec 7, 2010

the first one i dont find in varible list.. really Boolean? mhh
sry for stupid questions :-D

priest170234 · Dec 8, 2010

So.. Is there any more problems here?

sPy · Dec 8, 2010

Your "Random" trigger problem solved

Random Command
- Events
  - Player - Player 1 (Red) types a chat message containing -random as An exact match
  - Player - Player 2 (Blue) types a chat message containing -random as An exact match
  - Player - Player 3 (Teal) types a chat message containing -random as An exact match
  - Player - Player 4 (Purple) types a chat message containing -random as An exact match
  - Player - Player 5 (Yellow) types a chat message containing -random as An exact match
  - Player - Player 6 (Orange) types a chat message containing -random as An exact match
- Conditions
  - (Number of units in (Units owned by (Triggering player) matching (((Matching unit) is A Hero) Equal to True))) Equal to 0
- Actions
  - Set Random_Hero = (Random integer number between 1 and Random_Count)
  - Set RandomHeroSpawn = ((Triggering player) start location)
  - Unit - Create 1 Hero_Array[Random_Data[Random_Hero]] for (Triggering player) at RandomHeroSpawn facing Default building facing degrees
  - Game - Display to (All players) the text: (Playername[(Player number of (Triggering player))] + ( has randomed + (Name of (Last created unit))))
  - Selection - Select (Last created unit) for (Owner of (Last created unit))
  - Camera - Pan camera for (Triggering player) to RandomHeroSpawn over 0.20 seconds
  - Set RandomTempGroup = (Units owned by (Triggering player) of type Wähler)
  - Unit Group - Pick every unit in RandomTempGroup and do (Actions)
    - Loop - Actions
      - Unit - Remove (Picked unit) from the game
  - Set Random_Data[Random_Hero] = Random_Count
  - Set Random_Count = (Random_Count - 1)
  - Custom script: call DestroyGroup(udg_RandomTempGroup)
  - Custom script: call RemoveLocation(udg_RandomHeroSpawn)
  - -------- RandomHeroSpawn = Point Variable --------
  - -------- RandomTempGroup = Unit Group Variable --------

jokerman10000 · Dec 8, 2010

mhh
doesnt work... have the same as there
the whisp is there and you can take 2 heroes..

priest170234 · Dec 9, 2010

Can I do a system, and you just replace your system with mine?

EDIT: Here's the system.
It's similar to yours and it should work. Copy the triggers into your map.
Just create new variables and edit the hero array stuff.

Init
- Events
  - Map initialization
- Conditions
- Actions
  - Game - Display to (All players) the text: You have 15 seconds...
  - Selection - Select Wisp 0000 <gen>
  - -------- ///////////////////////////Game Settings --------
  - Set RepickAvailable = 1
  - Set Hero_Array[1] = Alchemist
  - Set Hero_Array[2] = Naga Sea Witch
  - Set Hero_Array[3] = Tinker
  - Set Hero_Array[4] = Beastmaster
  - Set Random_Count = 4
  - For each (Integer A) from 1 to Random_Count, do (Actions)
    - Loop - Actions
      - Set Random_Data[(Integer A)] = (Integer A)

T15
- Events
  - Time - Elapsed game time is 15.00 seconds
- Conditions
- Actions
  - Game - Display to (All players) the text: Default mode.
  - Trigger - Turn off AllRandom <gen>
  - Trigger - Turn on Random <gen>
  - Trigger - Turn on Choose <gen>

T45
- Events
  - Time - Elapsed game time is 45.00 seconds
- Conditions
- Actions
  - Game - Display to (All players) the text: Game starts
  - Trigger - Turn off Repick <gen>

Choose (Initially OFF)
- Events
  - Unit - A unit Is issued an order targeting an object
- Conditions
  - Player_Chosed[(Player number of (Owner of (Triggering unit)))] Equal to False
  - (Owner of (Target unit of issued order)) Equal to Neutral Passive
- Actions
  - Set Player_Chosed[(Player number of (Owner of (Triggering unit)))] = True
  - Set Random_Hero = (Random integer number between 1 and Random_Count)
  - Set Random_Data[Random_Hero] = Random_Count
  - Set Random_Count = (Random_Count - 1)
  - Unit - Remove (Triggering unit) from the game
  - Set TempPoint = (Center of Move <gen>)
  - Unit - Create 1 (Unit-type of (Target unit of issued order)) for (Owner of (Triggering unit)) at TempPoint facing Default building facing degrees
  - Selection - Select (Last created unit) for (Owner of (Triggering unit))
  - Camera - Pan camera for (Owner of (Triggering unit)) to TempPoint over 0.10 seconds
  - Custom script: call RemoveLocation(udg_TempPoint)

Random (Initially OFF)
- Events
  - Player - Player 1 (Red) types a chat message containing -random as An exact match
- Conditions
  - (Number of units in (Units owned by (Triggering player) matching (((Matching unit) is A Hero) Equal to True))) Equal to 0
- Actions
  - Unit - Remove Wisp 0000 <gen> from the game
  - Set Random_Hero = (Random integer number between 1 and Random_Count)
  - Set TempPoint = (Center of Move <gen>)
  - Unit - Create 1 Hero_Array[Random_Data[Random_Hero]] for (Triggering player) at TempPoint facing Default building facing degrees
  - Camera - Pan camera for (Triggering player) to TempPoint over 0.10 seconds
  - Custom script: call RemoveLocation(udg_TempPoint)
  - Selection - Select (Last created unit) for (Triggering player)
  - Set Random_Data[Random_Hero] = Random_Count
  - Set Random_Count = (Random_Count - 1)

Repick
- Events
  - Player - Player 1 (Red) types a chat message containing -repick as An exact match
- Conditions
  - RepickCount[(Player number of (Triggering player))] Less than RepickAvailable
- Actions
  - Set TempGroup = (Units owned by (Triggering player) matching (((Matching unit) is A Hero) Equal to True))
  - If (All Conditions are True) then do (Then Actions) else do (Else Actions)
    - If - Conditions
      - (Number of units in TempGroup) Equal to 1
    - Then - Actions
      - Unit Group - Pick every unit in TempGroup and do (Actions)
        
        Loop - Actions
        
        Unit - Remove (Picked unit) from the game
      - Set TempGroup = (Units owned by (Triggering player))
      - Set RepickCount[(Player number of (Triggering player))] = (RepickCount[(Player number of (Triggering player))] + 1)
      - Unit Group - Pick every unit in TempGroup and do (Actions)
        
        Loop - Actions
        
        Unit - Remove (Picked unit) from the game
      - Set TempPoint = (Center of Wisp <gen>)
      - Set PlayerRepicking[(Player number of (Owner of (Triggering unit)))] = True
      - Unit - Create 1 Wisp for (Triggering player) at TempPoint facing Default building facing degrees
      - Selection - Select (Last created unit) for (Triggering player)
      - Camera - Pan camera for (Triggering player) to TempPoint over 0.10 seconds
      - Custom script: call RemoveLocation(udg_TempPoint)
      - Game - Display to (All players) the text: You can now repick.
    - Else - Actions
      - Game - Display to (All players) the text: You don't have a he...
  - Custom script: call DestroyGroup(udg_TempGroup)

RepickChoose
- Events
  - Unit - A unit Is issued an order targeting an object
- Conditions
  - (Owner of (Target unit of issued order)) Equal to Neutral Passive
  - PlayerRepicking[(Player number of (Owner of (Triggering unit)))] Equal to True
- Actions
  - Set PlayerRepicking[(Player number of (Owner of (Triggering unit)))] = False
  - Unit - Remove (Triggering unit) from the game
  - Set TempPoint = (Center of Move <gen>)
  - Unit - Create 1 (Unit-type of (Target unit of issued order)) for (Owner of (Triggering unit)) at TempPoint facing Default building facing degrees
  - Selection - Select (Last created unit) for (Owner of (Triggering unit))
  - Camera - Pan camera for (Owner of (Triggering unit)) to TempPoint over 0.10 seconds
  - Custom script: call RemoveLocation(udg_TempPoint)

AllRandom
- Events
  - Player - Player 1 (Red) types a chat message containing -ar as An exact match
- Conditions
- Actions
  - Trigger - Turn off (This trigger)
  - Trigger - Turn off T15 <gen>
  - Unit - Remove Wisp 0000 <gen> from the game
  - Game - Display to (All players) the text: All Random
  - Set TempPoint = (Center of Move <gen>)
  - For each (Integer A) from 1 to 6, do (Actions)
    - Loop - Actions
      - Set Random_Hero = (Random integer number between 1 and Random_Count)
      - Set TempPoint = (Center of Move <gen>)
      - Unit - Create 1 Hero_Array[Random_Data[Random_Hero]] for (Player((Integer A))) at TempPoint facing Default building facing degrees
      - Camera - Pan camera for (Player((Integer A))) to TempPoint over 0.10 seconds
      - Custom script: call RemoveLocation(udg_TempPoint)
      - Selection - Select (Last created unit) for (Player((Integer A)))
      - Set Random_Data[Random_Hero] = Random_Count
      - Set Random_Count = (Random_Count - 1)
  - Custom script: call RemoveLocation(udg_TempPoint)
  - Custom script: call DestroyTrigger(gg_trg_AllRandom)

jokerman10000 · Dec 9, 2010

yeah of cause

priest170234 · Dec 9, 2010

Done, everything shown in my previous post.
(I edited that)

jokerman10000 · Dec 9, 2010

thanks guy now i have 2

both rep

jokerman10000 · Dec 9, 2010

The only thing i miss is:
when i repick the hero is taked is away..
and when i make random the hero isnt away so another guy can take him.. can anyone help me?

priest170234 · Dec 9, 2010

Oh so what you want is only one hero can be used in a game..?

jokerman10000 · Dec 9, 2010

can be another reason there?
:-D
i want it in the map war of wrath

priest170234 · Dec 9, 2010

Here, this may solve your problem.

jokerman10000 · Dec 9, 2010

priest170234 · Dec 10, 2010

jokerman10000 said:
mh..

What does your 'mh...' means?

[Trigger] Repick and Random command problem

Attachments

Attachments

Attachments

Attachments

Similar threads