[General] Gate System

[SenPie69]

What's the best way for the gate system? you see, i used roar for open close (2 separate copied abilities) its working fine, but the thing is, if the gate is destroyed and you either close/open the gate, it will revive. I want a gate where you can open close without reviving the doodads for abuse of blockade. And better if you can add, i tried doing the revive gate (named repair) via Channel (the empty undead hero spell) but the gate doesn't revive

 

[Gnuoy]

Would using the default wc3 waygate system work? I think the default waygate is the best system unless it is causing some kind of problem for you.

 

[Cheshire]

What's the best way for the gate system? you see, i used roar for open close (2 separate copied abilities) its working fine, but the thing is, if the gate is destroyed and you either close/open the gate, it will revive. I want a gate where you can open close without reviving the doodads for abuse of blockade. And better if you can add, i tried doing the revive gate (named repair) via Channel (the empty undead hero spell) but the gate doesn't revive

could you add more details about the type of gate you are trying to build and what it's supposed to do? (like how it would be activated etc)

 

[SenPie69]

Would using the default wc3 waygate system work? I think the default waygate is the best system unless it is causing some kind of problem for you.

i want a unpathable gate, not just phase through

could you add more details about the type of gate you are trying to build and what it's supposed to do? (like how it would be activated etc)

i want doodads gate to be open/close and once destroyed the open/close will not work, in my case once the gate is destroyed, using the close/open ability will revive the door. So basically, i want to remove that abuse and i was thinking of another way but that also didn't work hence i ask for any grand map modders what's best for gate system

ex scenario: player 2 breached player 1's gate and when player 2 is about to blob player 1 base, player 1 activate the open or close ability in which the dead gate will function and will basically revive the door in open/close way (i mean open door is basically alternate death but you get what im saying? lol) and for now i can only think of is increasing the cooldown window of the open/close ability as temporary solution.

 

[Chaosy]

I feel like the core problem here is that you want access to the gate even though it's dead(destroyed).
Not entirely sure if pathing is easy either but worst case you can just spawn path blockers I guess.
Anyway, using a damage detection system it should not be difficult to make the gate unkillable and when it reaches 1 life you can remove the pathing and play some sort of destroyed animation.

A bit clunky but I can't think of anything better right now

 

[SenPie69]

I feel like the core problem here is that you want access to the gate even though it's dead(destroyed).
Not entirely sure if pathing is easy either but worst case you can just spawn path blockers I guess.
Anyway, using a damage detection system it should not be difficult to make the gate unkillable and when it reaches 1 life you can remove the pathing and play some sort of destroyed animation.

A bit clunky but I can't think of anything better right now

Its the opposite actually, i want to open/close to be obsolete if the gate dies and yes i actually tried that since i have the GDD, it looks clunky indeed and i don't like it lol

• Open
  • Events
    • Unit - A unit Begins casting an ability
  • Conditions
    • (Ability being cast) Equal to Open Gate
  • Actions
    • Destructible - Pick every destructible in Gate1 <gen> and do (Destructible - Open Gate (Diagonal 1 left) 0086 <gen>)

• Close
  • Events
    • Unit - A unit Begins casting an ability
  • Conditions
    • (Ability being cast) Equal to Close Gate
  • Actions
    • Destructible - Pick every destructible in Gate1 <gen> and do (Destructible - Close Gate (Diagonal 1 left) 0086 <gen>)

This are my triggers currently, im still thinking what should i insert if i used if/else once the gate is destroy making the open/close basically clickable but nothing happens

 

[Chaosy]

You're saying the approaching unit has the open/close ability not the gate itself? same fot the revive?

 

[SenPie69]

You're saying the approaching unit has the open/close ability not the gate itself? same fot the revive?

uhh no, for the building, let just say the gate and the arch of the gate are separate building units, the gate is responsible for the path blocking while the arch is the one in control of the opening and closing of the gate

as for the revive, its another ability to revive the destroyed gate for the open/close to function

 

[Duckfarter]

Its possible to detect when a gate dies but it also dies when its opened so detection can be temporarily turned off during opening.

Here is an example of the logic. The addition from your logic is the added detection when the destructable dies, using the GateLife variable as a condition and to set the life of the Gate after closing to what it was before it was opened and an IsGateOpen boolean for simplicity and readability for a repair trigger.

destructable Gate = (Diagonal 1 left) 0086 <gen>
real GateLife = Life of Gate
real GateRepairAmount = 250
real GateLifePrev
boolean IsGateOpen = false

Trigger Gate dies
set GateLife = 0

Trigger Open Gate
if GateLife greater than 0 then
set IsGateOpen = true
set GateLife = Life of Gate
turn off Gate dies
Open Gate
turn on Gate dies
endif

Trigger Close Gate
if GateLife greater than 0 then
set IsGateOpen = false
Close Gate
set Life of Gate = GateLife
endif

The Repair trigger must detect if the gate was destroyed and the state of the gate (Open/Closed) in order to apply the Repair amount correctly.

Trigger Repair Gate
set GateLifePrev = GateLife
set GateLife = Max((GateLife + GateRepairAmount), Max life of Gate)

if GateLifePrev eqal to 0 then (It was destroyed)
Resurrect Gate with GateLife
endif
if GateLifePrev greater than 0 and IsGateOpen = false then (It was closed)
set life of Gate to GateLife
endif
if GateLifePrev greater than 0 and IsGateOpen = true then (It was open)
endif

 

[SenPie69]

Its possible to detect when a gate dies but it also dies when its opened so detection can be temporarily turned off during opening.

Here is an example of the logic. The addition from your logic is the added detection when the destructable dies, using the GateLife variable as a condition and to set the life of the Gate after closing to what it was before it was opened and an IsGateOpen boolean for simplicity and readability for a repair trigger.

destructable Gate = (Diagonal 1 left) 0086 <gen>
real GateLife = Life of Gate
real GateRepairAmount = 250
real GateLifePrev
boolean IsGateOpen = false

Trigger Gate dies
set GateLife = 0

Trigger Open Gate
if GateLife greater than 0 then
set IsGateOpen = true
set GateLife = Life of Gate
turn off Gate dies
Open Gate
turn on Gate dies
endif

Trigger Close Gate
if GateLife greater than 0 then
set IsGateOpen = false
Close Gate
set Life of Gate = GateLife
endif

The Repair trigger must detect if the gate was destroyed and the state of the gate (Open/Closed) in order to apply the Repair amount correctly.

Trigger Repair Gate
set GateLifePrev = GateLife
set GateLife = Max((GateLife + GateRepairAmount), Max life of Gate)

if GateLifePrev eqal to 0 then (It was destroyed)
Resurrect Gate with GateLife
endif
if GateLifePrev greater than 0 and IsGateOpen = false then (It was closed)
set life of Gate to GateLife
endif
if GateLifePrev greater than 0 and IsGateOpen = true then (It was open)
endif

Q: can this be modified to apply to all pre-placed gate? im thinking of variable counts to save time and i want to try this, sounds plausible

 

[Duckfarter]

Q: can this be modified to apply to all pre-placed gate? im thinking of variable counts to save time and i want to try this, sounds plausible

Sure, just slap an array on the variables. If each player has no more than 1 gate you can easily use Player Number of Player as the index for the arrays.

The text is pseudo-code, fake code. It shows the idea. At the top are the global variables that you create in gui with their variable type. Things like "Open Gate" corresponds to similar gui actions in that case "Destructible - Open Gate Gate". The "if->endif" are the "if then else do multiple actions" action.

 

[SenPie69]

Trigger Open Gate
if GateLife greater than 0 then
set IsGateOpen = true
set GateLife = Life of Gate
turn off Gate dies
Open Gate
turn on Gate dies
endif

Trigger Close Gate
if GateLife greater than 0 then
set IsGateOpen = false
Close Gate
set Life of Gate = GateLife
endif

• Gate Dies
  • Events
  • Conditions
  • Actions
    • Set GateLife = 0.00

• Gate Open
  • Events
  • Conditions
  • Actions
    • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
      • If - Conditions
        • GateLife Greater than 0.00
      • Then - Actions
        • Set IsGateOpen = True
        • Set GateLife = (Real((Integer((Current life of GateCount[40])))))
        • Trigger - Turn off Gate Dies <gen>
        • Destructible - Open GateCount[40]
        • Trigger - Turn on Gate Dies <gen>
      • Else - Actions

• Gate Close
  • Events
  • Conditions
  • Actions
    • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
      • If - Conditions
        • GateLife Greater than 0.00
      • Then - Actions
        • Set IsGateOpen = False
        • Destructible - Close GateCount[40]
        • Set GateLife = (Real((Integer((Current life of GateCount[40])))))
      • Else - Actions

did i do it right? lol

PS. i have more than 30+ gates and planned to add more