• Check out the results of the Techtree Contest #19!
  • Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.
  • Create a void inspired texture for Warcraft 3 and enter Hive's 34th Texturing Contest: Void! Click here to enter!
  • The Hive's 22nd Icon Contest: Creep Abilities is now concluded, time to vote for your favourite set of icons! Click here to vote!

Problem with spawning

Status
Not open for further replies.

iChaos

iChaos

iChaos

Level 6
Joined
May 4, 2012
Messages
187
  • Forest Creep Spawn
    • Events
      • Time - Every 40.00 seconds of game time
    • Conditions
    • Actions
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[1])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[1])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[2])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[2])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[3])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[3])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[4])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[4])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[5])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[5])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[6])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[6])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[7])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[7])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[8])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[8])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[9])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[9])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[10])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[10])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[11])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[11])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[12])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[12])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[13])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[13])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[14])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[14])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[15])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[15])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[16])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[16])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[17])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[17])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[18])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[18])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
      • For each (Integer A) from 1 to 2, do (Actions)
        • Loop - Actions
          • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
            • If - Conditions
              • (Number of units in (Units in NEUTRAL_REGION_1[19])) Equal to 0
            • Then - Actions
              • Set CreepPoint = (Center of NEUTRAL_REGION_1[19])
              • Unit - Create 2 NEUTRAL_CREEPS[1] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Unit - Create 1 NEUTRAL_CREEPS[2] for Neutral Hostile at CreepPoint facing Default building facing degrees
              • Custom script: call RemoveLocation(udg_CreepPoint)
            • Else - Actions
      • -------- -------------------------------------------------------- --------
      • -------- -------------------------------------------------------- --------
So, this is the one I suggested on other users... But this time something weird happen to mine... I got everything working, but in a weird way some creeps spawn at the center. To the one who can find it I will give +rep :ogre_haosis:
 
Status
Not open for further replies.

Similar threads

JFAMAP
  • Locked
Proper way to respawn neutrals?
Replies
21
Views
3K
Lordul Dracula
Lordul Dracula
pplDotA
  • Locked
[Solved] Creeps Respawn Problem
Replies
1
Views
1K
pplDotA
pplDotA
JFAMAP
  • Locked
Why respawned units are stacking?
Replies
6
Views
2K
Uncle
Uncle
Dinodin
  • Locked
I'm making an item like this but...
Replies
15
Views
2K
Uncle
Uncle
T
  • Locked
Warcraft III basic trigger gone hay-wire!
Replies
5
Views
2K
Tenshi no aisudora
T
Back
Top