Changing Unit Ownership

[Swe]

Hi.
I`m new on triggering (though I grasp the basics) and wonder how I can make a building, owned by a player, to change owner when it`s killed to the player who destroyed it.

Apologee for my bad english

 

[sPy]

• Is this what are you looking for
  • Events
    • Unit - A unit Dies
  • Conditions
    • ((Triggering unit) is A structure) Equal to True
  • Actions
    • Unit - Change ownership of (Triggering unit) to (Owner of (Killing unit)) and Change color

 

[Swe]

Yes, thanks
Appreciate the quick answer

 

[Tleno]

This is a bad bad idea. I mean player will get a dead building...
If you want to make so when building is changing owner when it is damaged enough and then gets HP set back to 100%, you can replace Unit Dies with Unit Recieves Damage.
And in Conditions add "Trrigering unit hp is under (amount of hp, like 50)". And at the end you should also add "Set HP of trrigering unit to 100%".

 

[defskull]

How does the building DESTROYED, and yet, you can control (change ownership) of it ?
Weird...

 

[Swe]

• Is this what are you looking for
  • Events
    • Unit - A unit Dies
  • Conditions
    • ((Triggering unit) is A structure) Equal to True
  • Actions
    • Unit - Change ownership of (Triggering unit) to (Owner of (Killing unit)) and Change color

Just noticed that this trigger diden`t work. However, I solved this by creating a more complicated trigger (instead of those below). This works fine though but thanks anyways

 

[defskull]

Of course it doesn't work
LOL the unit is DEAD, how would you supposed to control dead unit/building ?
(Refer its Event, unit Dies)

 

[sPy]

I just followed what he asked, no matter it is logical/unlogical

Edit: What I mean is..He didn't give full details~

 

[defskull]

It IS logical based on your trigger
Even unit dies, still takes control ?
It's logical that you're doing unlogical statement/solution.

 

[darkzxx]

what you want right ?
there are some error but i won't edit it

 

[Ramza]

That trigger doesn't make any sense. The life of a dying unit is always less than 50. ;P

Use event: Unit is attacked. If life of attacked unit is less than XX%, do actions. So, yeah, what Tleno said.

 

[defskull]

That trigger doesn't make any sense. The life of a dying unit is always less than 50. ;P

Use event: Unit is attacked. If life of attacked unit is less than XX%, do actions. So, yeah, what Tleno said.

Make sure to use Trigger - Add new Event action =D

[TRIGGER=]
What you want
Events
Unit - A unit Dies
Conditions
[Life of [Triggering unit]]Less than 50.00
Action
Unit - Set life of [Triggering unit] to 100%
Unit - Change ownership of [Triggering unit] to [Triggering player] and Change color
Selection - Select [Triggering unit] for Player 1 [Red][/TRIGGER]
what you want right ?

If the unit DIES, that makes no sense to control the unit anymore, and it doesn't matter which unit is it, because it's DEAD
So, make a trigger that detects current HP of the unit
Say, if below 1%~5% of its max HP, set the building to 100% HP and change owner
And by this, the building doesn't "die" yet, it just changes owner + renewable HP (set to 100% HP)
Be sure to use the Event - Unit Is attacked, but make it two trigger, followed by Trigger - Add New Event for Attacked unit Takes damage event

 

[D0W3R]

Use this one, I think this is what you need:

• aaa
  • Events
    • Unit - A unit Is attacked
  • Conditions
    • (Unit-type of (Attacked unit)) Equal to Town Hall
    • (Life of (Attacked unit)) Less than or equal to 100.00
  • Actions
    • Unit - Set life of (Attacked unit) to 100.00%
    • Unit - Change ownership of (Attacked unit) to (Owner of (Attacking unit)) and Change color

 

[defskull]

You can't use single trigger for the event Unit Is attacked
Because, the trigger will be fired even before the damage is done to the unit
Therefore, NO damage calculation is calculated for that trigger
You're doing it right but, just remove the Set life and Change owner and replace with Trigger - Add New Event (requires another new trigger)
Find the Event Specific unit - Action
Make it, Attacked unit Takes damage (Event Response)
Then at the second trigger, input the set life and change ownership
By this way, it's calculated normally.

 

[Swe]

As I said, I (kind of) solved the problem, although it resulted in a more complicated trigger.

 

[defskull]

So, are you gonna go deep or stop here.. ? =p

 

[darkzxx]

no,i edit it
here

change the triggering unit to the unit you want
wait defskull you are confusing me

 

[defskull]

I'm saying that your trigger (Event) doesn't work PROPERLY
Test map on its way, ETA: 20mins

EDIT:
Test map attached
Took me 25mins >.>

 

[darkzxx]

O:,there are some minor mistakes but it's the same and point taken

 

[defskull]

Just because of that MINOR mistake, your trigger will be MALFUNCTION =D
(Your trigger will be fired even before the damage is not dealt yet, so how the hell did the trigger can interpret damage taken by the building and HP of it before the damage actually, exist?)

 

[darkzxx]

i meant urs....
mine has minor mistake that gives out serious problems

 

[priest170234]

Here, try this, I'm not sure if this will bug, rushed it.

It's one trigger and has only three actions.

 

[darkzxx]

your singature is wrong,leaks do matter,if there are leaks,your map will lag like hell

 

[priest170234]

your singature is wrong,leaks do matter,if there are leaks,your map will lag like hell

Haha, don't you see the sarcasm? Using the SARCASM tag. Look under BB_Codes.

 

[darkzxx]

sorry >.<