Pterodactyl Troll Model Request

[Dominus15]

I come to ask for help in case someone who is an expert and could make it easy for me could make me a model based on a pterodactyl without a mount and another with a headhunter troll mount.

I leave you more or less what an image of a pterrodax with a troll mount would look like.

It will be very useful for my troll race map, please someone with a good heart
Pterrordax Mount Troll

 

[Bleeq]

Can you link the model you uploaded again? I didn't get to download it before it was taken down.

 

[Bleeq]

Zandalari Pterodax Rider image - Age of Warcraft mod for Warcraft III: Reforged

View the ModDB Age of Warcraft mod for Warcraft III: Reforged image Zandalari Pterodax Rider

www.moddb.com

Dino-Riders Ptérodactyle avec Llahd - Les Archives de Joe

Présentation du Dino-Riders Ptérodactyle, qui est l'un des plus basiques et petits modèles de la gamme créée par Tyco. Accompagné du jeune Valorien Llahd, il est l'un des 12 modèles sortis lors de la première vague de jouets au printemps 1988. Un ptérosaure simple sur lequel il y a en fait...

www.les-archives-de-joe.net

 

[Lefroit]

Can you link the model you uploaded again? I didn't get to download it before it was taken down.

Here:

 

[Bleeq]

Okay I'll play around with this and report back with anything interesting

 

[Dominus15]

Okay I'll play around with this and report back with anything interesting

It would be great to see a troll mount based on the orc wind rider, I'm looking forward to it

 

[Bleeq]

Here:

So I'm finally have a go at this...

But there seems to be a weird artifact in the linked/original pterodax model.
Most of the planes or vertices.. I think they've been copied over themselves about 4 times.

If you use the plane select tool in RMS and select what appears to be a single triangle, then swap to vertex tool, if you try to create a new plane from the selection, it will say you have 12 vertexes selected. (note it shouldn't create a new plane anyway, as one exists already, but this is giving the game away.)

I noticed the file size became very bloated when I added the dino, but I didn't twig as to why that was. It looks to me like there is a ton of redundancy, so you have the equivalent of 4 dinos without getting any benefit.

More importantly it makes it way harder to add new geometry connected to the old dino stuff.

TL;DR-

If anyone sees this, is there a way to cull redundant geometry that is pasted exactly over itself?

 

[Bleeq]

Btw, Blizzard's windrider model is a nightmare. The skeleton is constructed of helpers with mesh bones attached to each bone, and vertices are attached to the meshes. but the translations and movement is via the bones...

And none of them are labeled as anything useful it's just "mesh34" and "mesh19" ffs.

 

[Bleeq]

pogdax

 

[Dominus15]

I don't know much about model building, but I'm sure you'll find a way to make the pterrordax look perfect.

 

[Bleeq]

I think it's looking alright so far, what sort of armour would the troll have?
I'm aiming for a golden or bronze mask. Dunno about body armour if any at all.
I'll see if I can get a mask on the pterodax, and try for those metalic bits on the hand claws.

 

[Bleeq]

Hopefully this link works?

I always forget how small things will become in-game... you spend all this time fussing over some detail then in the actual game environment you can barely even see it.

Anyway, I think the dino and troll bodies could become a bit bigger, but leave the wings as they are, or slightly smaller. That would show off some details more.

 

[Lefroit]

The model's not opening. Not in the game and neither in model editors. There must be some problem with materials and textures.

 

[Bleeq]

hmm well why does it work on my end then?

I'll see what I can do. Thanks for letting me know.

-EDIT-

The model's not opening. Not in the game and neither in model editors. There must be some problem with materials and textures.

I think it was actually a format problem.
I've updated the pastebin with a new model with older format, this one actually loaded into model checker (tho with many issues lol, it's not finished after all).

 

[Lefroit]

It's great, amazing how you adapted pterrodax to wyvern. Although, since there is no portrait, perhaps you could use troll's face rig from Wind Rider and Derivatives to make portrait animations. What are geosets 10 and 11 supposed to be? (picture 1). I also extracted new textures for the bird with color variants because old ones were of low quality, comparison is on picture 2 (old/new).

 

[Bleeq]

those other bits are leftovers from trying to make some armour.
I want to make a gold/bronze mask for both the bird and the troll.
maybe a breast plate on the bird, and chains holding it to the saddle. Or holding them both on the bird!
lastly maybe bronze claw attachments like in the reference pics.

I don't want to go overboard with the details and fluff, but zandalari stuff is a bit like that right?

Also, we could come up with a new different spell animation but it would probably depend on what sort of spells you were going to give it. e.g. do the spells come from the troll or the bird? Current one is implied to come from the bird's tail because of the scorpion stinger on wyverns.

 

[Bleeq]

I'll do a couple of talk animations tomorrow then dump it here as a beta, see what people think.
btw that new wing skin is a lot better

-edit- Bat Rider's portrait is so damn animated. Then you have garbage like dragonhawk. I think this is better than dragonhawk but still needs a bit of polish :/
I never noticed before that gryphons don't even have talk portraits.

EDIT2

Here's the "beta", pterodax_057.

2 portraits, 1 talk. Haven't done all the extents or checked the other little fiddly bits.
I'm not happy with the saddle but also need a break -_- lol