[Trigger] Bladestorm (Spinning Effect)

[xyzier_24]

Hello guys. I really need some help right now.
I'm trying to create a Sfx for Bladestorm, where any unit who doesn't have any spinning animation will be able to spin using a trigger. It works fine when the Speed of the rotation is +10 degrees counter-clockwise every 0.03 seconds, but the spin looks awful because it's too slow so I tried increasing it. But when I tried to increase it, there's some instance where the unit suddenly turns clockwise for a short time, and the higher the angle turn is, the more it will occur. I have a guess that the reason is the turn rate, but I still not sure yet. Please help me fix this.

Triggers

• Bladestorm
  • Events
    • Unit - A unit Starts the effect of an ability
  • Conditions
    • (Ability being cast) Equal to Bladestorm
    • (Unit-type of (Triggering unit)) Equal to Jaina
  • Actions
    • Set OrcAbilityBS_Max = (OrcAbilityBS_Max + 1)
    • Set OrcAbilityBS_Caster[OrcAbilityBS_Max] = (Triggering unit)
    • Set OrcAbilityBS_Angle[OrcAbilityBS_Max] = (Facing of OrcAbilityBS_Caster[OrcAbilityBS_Max])
    • Set OrcAbilityBS_Duration[OrcAbilityBS_Max] = 7.00
    • Set Global_Point[0] = (Position of OrcAbilityBS_Caster[OrcAbilityBS_Max])
    • Unit - Create 1 Dummy (Bladestorm, Jaina) for (Owner of OrcAbilityBS_Caster[OrcAbilityBS_Max]) at Global_Point[0] facing OrcAbilityBS_Angle[OrcAbilityBS_Max] degrees
    • Set OrcAbilityBS_Dummy[OrcAbilityBS_Max] = (Last created unit)
    • Special Effect - Create a special effect attached to the origin of OrcAbilityBS_Dummy[OrcAbilityBS_Max] using war3mapImported\Bladestorm.mdx
    • Animation - Change OrcAbilityBS_Dummy[OrcAbilityBS_Max]'s animation speed to 200.00% of its original speed
    • Animation - Play OrcAbilityBS_Dummy[OrcAbilityBS_Max]'s spell animation
    • Animation - Change OrcAbilityBS_Caster[OrcAbilityBS_Max]'s vertex coloring to (100.00%, 100.00%, 100.00%) with 100.00% transparency
    • Custom script: call RemoveLocation(udg_Global_Point[0])
    • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
      • If - Conditions
        • OrcAbilityBS_Max Equal to 1
      • Then - Actions
        • Trigger - Turn on Bladestorm Loop <gen>
      • Else - Actions

• Bladestorm Loop
  • Events
    • Time - Every 0.03 seconds of game time
  • Conditions
  • Actions
    • For each (Integer OrcAbilityBS_Loop) from 1 to OrcAbilityBS_Max, do (Actions)
      • Loop - Actions
        • Set OrcAbilityBS_Duration[OrcAbilityBS_Loop] = (OrcAbilityBS_Duration[OrcAbilityBS_Loop] - 0.03)
        • Set OrcAbilityBS_Angle[OrcAbilityBS_Loop] = (OrcAbilityBS_Angle[OrcAbilityBS_Loop] + 20.00)
        • Set Global_Point[0] = (Position of OrcAbilityBS_Caster[OrcAbilityBS_Loop])
        • Set TempUnit = OrcAbilityBS_Dummy[OrcAbilityBS_Loop]
        • Custom script: call SetUnitFacing(udg_OrcAbilityBS_Dummy[udg_OrcAbilityBS_Loop], udg_OrcAbilityBS_Angle[udg_OrcAbilityBS_Loop])
        • Unit - Move OrcAbilityBS_Dummy[OrcAbilityBS_Loop] instantly to Global_Point[0]
        • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
          • If - Conditions
            • OrcAbilityBS_Duration[OrcAbilityBS_Loop] Less than or equal to 6.40
          • Then - Actions
            • Animation - Change OrcAbilityBS_Dummy[OrcAbilityBS_Loop]'s animation speed to 0.00% of its original speed
          • Else - Actions
        • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
          • If - Conditions
            • Or - Any (Conditions) are true
              • Conditions
                • (OrcAbilityBS_Caster[OrcAbilityBS_Loop] is dead) Equal to True
                • OrcAbilityBS_Duration[OrcAbilityBS_Loop] Less than or equal to 0.00
          • Then - Actions
            • Animation - Change OrcAbilityBS_Caster[OrcAbilityBS_Loop]'s vertex coloring to (100.00%, 100.00%, 100.00%) with 0.00% transparency
            • Unit - Remove OrcAbilityBS_Dummy[OrcAbilityBS_Loop] from the game
            • Set OrcAbilityBS_Caster[OrcAbilityBS_Loop] = OrcAbilityBS_Caster[OrcAbilityBS_Max]
            • Set OrcAbilityBS_Caster[OrcAbilityBS_Max] = No unit
            • Set OrcAbilityBS_Dummy[OrcAbilityBS_Loop] = OrcAbilityBS_Dummy[OrcAbilityBS_Max]
            • Set OrcAbilityBS_Dummy[OrcAbilityBS_Max] = No unit
            • Set OrcAbilityBS_Duration[OrcAbilityBS_Loop] = OrcAbilityBS_Duration[OrcAbilityBS_Max]
            • Set OrcAbilityBS_Angle[OrcAbilityBS_Loop] = OrcAbilityBS_Angle[OrcAbilityBS_Max]
            • Set OrcAbilityBS_Max = (OrcAbilityBS_Max - 1)
            • Set OrcAbilityBS_Loop = (OrcAbilityBS_Loop - 1)
          • Else - Actions
        • Custom script: call RemoveLocation(udg_Global_Point[0])
        • If (All Conditions are True) then do (Then Actions) else do (Else Actions)
          • If - Conditions
            • OrcAbilityBS_Max Equal to 0
          • Then - Actions
            • Trigger - Turn off (This trigger)
          • Else - Actions

Here's the map:

 

[xyzier_24]

bump. Anyone?

 

[Tal'Rarity]

You need to either use a dummy unit on each big turn/curve or instant turning which is possible by one of the 2 GUI move unit actions with facing while following one condition/rule for it or About Movement .

 

[xyzier_24]

Thankyou for this one, kind sir.