How to import Tauren Seer Portrait

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Tauren Seer Portrait of the bundle Tauren Seer Portrait. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Tauren Seer.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing TaurenWarPriest_Portrait.mdx

Now Click the "Import File" Button:

Next select 'TaurenWarPriest_Portrait.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file TaurenWarPriest_Portrait.mdx.

Importing Tauren_WarPriest_Bracer_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Tauren_WarPriest_Bracer_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Tauren_WarPriest_Bracer_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Tauren_WarPriest_Bracer_Diffuse.dds.

Importing Tauren_WarPriest_Fur_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Tauren_WarPriest_Fur_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Tauren_WarPriest_Fur_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Tauren_WarPriest_Fur_Diffuse.dds.

Importing Tauren_WarPriest_Main_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Tauren_WarPriest_Main_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Tauren_WarPriest_Main_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Tauren_WarPriest_Main_Diffuse.dds.

Importing Tauren_WarPriest_Main_ORM.dds

Now Click the "Import File" Button:

Next select 'Tauren_WarPriest_Main_ORM.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Tauren_WarPriest_Main_ORM.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Tauren_WarPriest_Main_ORM.dds.

Importing Tauren_WarPriest_MaskPauldron_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Tauren_WarPriest_MaskPauldron_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Tauren_WarPriest_MaskPauldron_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Tauren_WarPriest_MaskPauldron_Diffuse.dds.

Importing TaurenWarPriest.facefx_ingame

Now Click the "Import File" Button:

Next select 'TaurenWarPriest.facefx_ingame' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TaurenWarPriest.facefx_ingame:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TaurenWarPriest.facefx_ingame.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.