How to import Speaker of Azeroth, Magni 1.5

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Speaker of Azeroth, Magni 1.5 of the bundle Speaker of Azeroth, Magni 1.5. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file King Magni Bronzebeard 1.5.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Magni_SpeakerOfAzeroth.mdx

Now Click the "Import File" Button:

Next select 'Magni_SpeakerOfAzeroth.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file Magni_SpeakerOfAzeroth.mdx.

Importing magni_armor_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_armor_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_armor_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_armor_main_diffuse.dds.

Importing magni_bronzebeard_hair_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_bronzebeard_hair_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_bronzebeard_hair_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_bronzebeard_hair_diffuse.dds.

Importing magni_bronzebeard_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_bronzebeard_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_bronzebeard_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_bronzebeard_main_diffuse.dds.

Importing magni_bronzebeard_mustache_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_bronzebeard_mustache_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_bronzebeard_mustache_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_bronzebeard_mustache_diffuse.dds.

Importing magni_crystal_armor_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_armor_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_armor_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_armor_main_diffuse.dds.

Importing magni_crystal_avatar_beard_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_avatar_beard_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_avatar_beard_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_avatar_beard_diffuse.dds.

Importing magni_crystal_avatar_crown_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_avatar_crown_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_avatar_crown_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_avatar_crown_diffuse.dds.

Importing magni_crystal_avatar_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_avatar_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_avatar_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_avatar_main_diffuse.dds.

Importing magni_crystal_avatar_pauldron_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_avatar_pauldron_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_avatar_pauldron_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_avatar_pauldron_diffuse.dds.

Importing magni_crystal_avatar_shield_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_avatar_shield_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_avatar_shield_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_avatar_shield_diffuse.dds.

Importing magni_crystal_avatar_weapon_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_avatar_weapon_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_avatar_weapon_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_avatar_weapon_diffuse.dds.

Importing magni_crystal_helmet_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_helmet_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_helmet_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_helmet_diffuse.dds.

Importing magni_crystal_mustache_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_mustache_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_mustache_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_mustache_diffuse.dds.

Importing magni_crystal_pauldron_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_pauldron_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_pauldron_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_pauldron_diffuse.dds.

Importing magni_crystal_pauldron_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_pauldron_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_pauldron_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_pauldron_main_diffuse.dds.

Importing magni_crystal_shield_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_shield_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_shield_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_shield_diffuse.dds.

Importing magni_crystal_weapon_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_crystal_weapon_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_crystal_weapon_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_crystal_weapon_diffuse.dds.

Importing magni_pauldron_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'magni_pauldron_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file magni_pauldron_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file magni_pauldron_main_diffuse.dds.

Importing KingMagniBronzebeard.facefx_ingame

Now Click the "Import File" Button:

Next select 'KingMagniBronzebeard.facefx_ingame' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file KingMagniBronzebeard.facefx_ingame:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file KingMagniBronzebeard.facefx_ingame.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: