• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

ND.w3x
Variables
Инициализация
Иниц. сражения
Spell
---------------------------
Napalm Dump A
Napalm Dump B
Введите ниже нестандартный код для указанной карты. Этот текст будет включен в код карты после объявления переменных и до кода любого триггера.
Name Type is_array initial_value
ND integer No
ND_Angle real Yes
ND_Caster unit Yes
ND_CastNumber integer No
ND_Distance real Yes
ND_Effect integer Yes
ND_Gyro unit Yes
ND_Off boolean Yes
ND_Point location Yes
ND_Speed real Yes
ND_Switch integer No
Инициализация стандартного режима сражения для всех игроков
Иниц. сражения
Events
Map initialization
Conditions
Actions
Visibility - Disable fog of war
Visibility - Disable black mask
Napalm Dump
MUI, leakless, works.
---
To import this spell in your map:
1. Export BomobardmentTerrain.mdx and import it in your map (this model less lagg)
2. Copy all custom object (Units;Abilities;Buffs) and paste them in your map
3. Copy Spell triggers to your map, and check that correct units in Create Unit actions.
---
Don't forget about credits =)

I hope that Comments will help you to understand all in spell.

In Object Manager change Missile Speed of Effect: Attacker and ability ND: Damage over Time to what you want.
Napalm Dump A
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Napalm Dump
Actions
-------- If ND_Switch = 0, it means trigger Napalm Dump B is not used, we need to turn it on --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
ND_Switch Equal to 0
Then - Actions
Trigger - Turn on Napalm_Dump_B <gen>
Else - Actions
-------- Increasing ND_Switch on 1, we show, that trigger Napalm Dump B has started to be used --------
Set Variable Set ND_Switch = (ND_Switch + 1)
-------- Increasing ND_CastNumber on 1, we show, one more unit began to use ability --------
Set Variable Set ND_CastNumber = (ND_CastNumber + 1)
-------- ND_Off Confirms, that ability is used or not --------
Set Variable Set ND_Off[ND_CastNumber] = "true"
-------- Let's establish the Hero, its position and target point --------
Set Variable Set ND_Caster[ND_CastNumber] = (Triggering unit)
Set Variable Set ND_Point[0] = (Position of ND_Caster[ND_CastNumber])
Set Variable Set ND_Point[1] = (Target point of ability being cast)
-------- ND_Distance It should be equal 0 because the Effect will be move from position of a Caster --------
Set Variable Set ND_Distance[ND_CastNumber] = "0.00"
-------- Let's establish an angle between ND_Point [0] and ND_Point [1] --------
Set Variable Set ND_Angle[ND_CastNumber] = (Angle from ND_Point[0] to ND_Point[1])
-------- Increasing/reducing this value we increase/reduce speed of movement of Effect --------
Set Variable Set ND_Speed[ND_CastNumber] = "25.00"
-------- Let's create Effect --------
Unit - Create 1 . Effect: Gyrocopter for (Owner of ND_Caster[ND_CastNumber]) at ND_Point[0] facing ND_Angle[ND_CastNumber] degrees
Set Variable Set ND_Gyro[ND_CastNumber] = (Last created unit)
-------- Removing Location to avoid leaks --------
Custom script: call RemoveLocation (udg_ND_Point[0])
Custom script: call RemoveLocation (udg_ND_Point[1])
Napalm Dump B
Events
Time - Every 0.04 seconds of game time
Conditions
Actions
-------- We using variable ND instead of Integer A --------
For each (Integer ND ) from 1 to ND_CastNumber , do (Actions)
Loop - Actions
-------- If ND_Off = True there will be following actions --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
ND_Off[ND] Equal to True
Then - Actions
-------- We add ND_Speed to ND_Distance, whether it displays there has passed Effect the established distance --------
Set Variable Set ND_Distance[ND] = (ND_Distance[ND] + ND_Speed[ND])
-------- Let's establish a position of Effect and a position where later we will move it --------
Set Variable Set ND_Point[2] = (Position of ND_Gyro[ND])
Set Variable Set ND_Point[3] = (ND_Point[2] offset by ND_Speed[ND] towards ND_Angle[ND] degrees.)
Unit - Move ND_Gyro[ND] instantly to ND_Point[3] , facing ND_Angle[ND] degrees
-------- If the Effect comes nearer to map borders, we will establish ND_Distance on value at which ability use will stop --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(Terrain pathing at ND_Point[3] of type Flyability is off) Equal to True
Then - Actions
Set Variable Set ND_Distance[ND] = (400.00 + (200.00 x (Real((Level of Napalm Dump for ND_Caster[ND])))))
Else - Actions
-------- Removing Location to avoid leaks --------
Custom script: call RemoveLocation (udg_ND_Point[2])
Custom script: call RemoveLocation (udg_ND_Point[3])
-------- If ND_Distance equals to value at which ability stops, will run next actions --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
ND_Distance[ND] Greater than or equal to (400.00 + (200.00 x (Real((Level of Napalm Dump for ND_Caster[ND])))))
Then - Actions
-------- Get rid from Effect --------
Unit - Remove ND_Gyro[ND] from the game
-------- Let's establish ND_Off = False, the unit means has stopped to use ability --------
Set Variable Set ND_Off[ND] = "false"
-------- Let's reduce ND_Switch on 1, it means, that the quantity of units using ability was reduced on 1 --------
Set Variable Set ND_Switch = (ND_Switch - 1)
-------- If ND_Switch = 0, it means ability is not used by any unit, we can reset indexes and turn off this trigger --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
ND_Switch Equal to 0
Then - Actions
Set Variable Set ND_CastNumber = "0"
Trigger - Turn off Napalm_Dump_B <gen>
Else - Actions
Else - Actions
-------- If ND_Distance noy equals to value at which ability stops, will run next actions --------
-------- If ND_Effect = 3 then run following actions --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
ND_Effect[ND] Equal to 3
Then - Actions
-------- Let's establish a position of Effect and a position where later we will move it --------
Set Variable Set ND_Point[4] = (Position of ND_Gyro[ND])
Set Variable Set ND_Point[5] = (ND_Point[4] offset by ND_Speed[ND] towards ND_Angle[ND] degrees.)
-------- Let's set ND_Effect to 0 for correct working --------
Set Variable Set ND_Effect[ND] = "0"
-------- Let's create another Effect --------
Unit - Create 1 . Effect: Attacker for (Owner of ND_Caster[ND]) at ND_Point[5] facing Default building facing degrees
-------- Let's add ability that can be edited in Object Manager --------
Unit - Add ND: Damage over Time to (Last created unit)
Unit - Set level of ND: Damage over Time for (Last created unit) to (Level of Napalm Dump for ND_Caster[ND])
-------- Ordering Effect to attack --------
Unit - Order (Last created unit) to Attack Ground . ND_Point[5]
Unit - Add a 3.00 second Generic expiration timer to (Last created unit)
-------- Let's create visual effect for Gyrocopter --------
Special Effect - Create a special effect attached to the origin (Unexpected type: 'attachpoint') of ND_Gyro[ND] using Abilities\Spells\Human\FlakCannons\FlakTarget.mdl
Special Effect - Destroy (Last created special effect)
-------- Removing Location to avoid leaks --------
Custom script: call RemoveLocation (udg_ND_Point[4])
Custom script: call RemoveLocation (udg_ND_Point[5])
Else - Actions
-------- If ND_Effect not equals 3 we increase ND_Effect --------
Set Variable Set ND_Effect[ND] = (ND_Effect[ND] + 1)
Else - Actions
Top