• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

Troll berseker.w3x
Variables
Inicializace
init
HookCast
HookEffect
saultCast
saultEffect
Níže zapište kód vlastního skriptu
Name Type is_array initial_value
GameValue integer No
Hashtable hashtable No
Hook unit Yes
sault_Distance real Yes
sault_group group No
sault_time real Yes
TempBolean boolean No
TempGroup group No
TempInteger integer No
TempPoint location No
TempPoint2 location No
TempReal real No
TempReal2 real No
TempReal3 real No
TempUnit unit No
TempUnit2 unit No
TempValue integer No
init
Events
Map initialization
Conditions
Actions
Hashtable - Create a hashtable
Set Variable Set Hashtable = (Last created hashtable)
HookCast
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Hook hold
Actions
Set Variable Set TempValue = (Custom value of (Triggering unit))
Set Variable Set TempReal = "0.00"
Hashtable - Save TempReal as (Key hookTime.) of (Key (Triggering unit).) in Hashtable .
Set Variable Set TempPoint = (Position of (Triggering unit))
Set Variable Set TempPoint2 = (Position of (Target unit of ability being cast))
Set Variable Set TempReal = (Distance between TempPoint and TempPoint2)
Set Variable Set TempReal2 = (Angle from TempPoint to TempPoint2)
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
Set Variable Set TempBolean = "true"
Hashtable - Save TempBolean as (Key hookBolean.) of (Key (Triggering unit).) in Hashtable .
Hashtable - Save Handle Of (Target unit of ability being cast) as (Key hookTarget.) of (Key (Triggering unit).) in Hashtable .
Set Variable Set TempUnit = (Triggering unit)
Set Variable Set TempReal = (TempReal / 30.00)
Set Variable Set TempInteger = "0"
For each (Integer A) from 1 to (Integer(TempReal)) , do (Actions)
Loop - Actions
Set Variable Set TempPoint = (Position of TempUnit)
Set Variable Set TempPoint2 = (TempPoint offset by 30.00 towards TempReal2 degrees.)
Unit - Create 1 . Hook for (Owner of (Triggering unit)) at TempPoint2 facing TempReal2 degrees
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
Set Variable Set TempUnit = (Last created unit)
Set Variable Set TempInteger = (TempInteger + 1)
Hashtable - Save TempInteger as (Key hookNumber.) of (Key (Triggering unit).) in Hashtable .
Hashtable - Save Handle Of (Last created unit) as (Key ((String(TempValue)) + (hook + (String(TempInteger)))).) of (Key (Triggering unit).) in Hashtable .
HookEffect
Events
Time - Every 0.03 seconds of game time
Conditions
Actions
Set Variable Set TempGroup = (Units in (Playable map area))
Unit Group - Pick every unit in TempGroup and do (Actions)
Loop - Actions
Custom script: call DestroyGroup(udg_TempGroup)
Set Variable Set TempBolean = (Load (Key hookBolean.) of (Key (Picked unit).) from Hashtable.)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TempBolean Equal to True
Then - Actions
Set Variable Set TempValue = (Custom value of (Picked unit))
Set Variable Set TempReal = (Load (Key hookTime.) of (Key (Picked unit).) from Hashtable.)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TempReal Less than 6.00
Then - Actions
Set Variable Set TempReal = (TempReal + 0.03)
Hashtable - Save TempReal as (Key hookTime.) of (Key (Picked unit).) in Hashtable .
Set Variable Set TempInteger = (Load (Key hookNumber.) of (Key (Picked unit).) from Hashtable.)
Set Variable Set TempUnit = (Load (Key ((String(TempValue)) + (hook + (String(1)))).) of (Key (Picked unit).) in Hashtable.)
Set Variable Set TempPoint = (Position of (Picked unit))
Set Variable Set TempPoint2 = (Position of TempUnit)
Set Variable Set TempReal = (Distance between TempPoint and TempPoint2)
Set Variable Set TempReal2 = (Angle from TempPoint to TempPoint2)
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TempReal Greater than 30.00
Then - Actions
Set Variable Set TempReal = (TempReal x 0.20)
Set Variable Set TempPoint = (Position of TempUnit)
Set Variable Set TempPoint2 = (TempPoint offset by (TempReal x -1.00) towards TempReal2 degrees.)
Custom script: call SetUnitX(udg_TempUnit2, GetLocationX(udg_TempPoint2))
Custom script: call SetUnitY(udg_TempUnit2, GetLocationY(udg_TempPoint2))
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
Else - Actions
Set Variable Set TempPoint = (Position of TempUnit)
Set Variable Set TempPoint2 = (TempPoint offset by (TempReal x -1.00) towards TempReal2 degrees.)
Custom script: call SetUnitX(udg_TempUnit, GetLocationX(udg_TempPoint2))
Custom script: call SetUnitY(udg_TempUnit, GetLocationY(udg_TempPoint2))
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
Unit - Make TempUnit face TempReal2 over 0 seconds
Set Variable Set TempReal3 = (Current flying height of (Picked unit))
Set Variable Set TempReal3 = ((Current flying height of TempUnit) - TempReal3)
Set Variable Set TempReal3 = (TempReal3 x -1.00)
Set Variable Set TempReal3 = (TempReal3 x 0.45)
Unit - Add Fly to TempUnit
Animation - Change TempUnit flying height to ((Current flying height of TempUnit) + TempReal3) at 0.00
Unit - Remove Fly from TempUnit
-------- Function --------
For each (Integer A) from 1 to TempInteger , do (Actions)
Loop - Actions
Set Variable Set TempUnit = (Load (Key ((String(TempValue)) + (hook + (String((Integer A))))).) of (Key (Picked unit).) in Hashtable.)
Set Variable Set TempUnit2 = (Load (Key ((String(TempValue)) + (hook + (String(((Integer A) + 1))))).) of (Key (Picked unit).) in Hashtable.)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(Integer A) Equal to TempInteger
Then - Actions
Set Variable Set TempUnit2 = (Load (Key hookTarget.) of (Key (Picked unit).) in Hashtable.)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(TempUnit2 is dead) Equal to True
Then - Actions
Special Effect - Create a special effect attached to the origin (Unexpected type: 'attachpoint') of TempUnit2 using Objects\Spawnmodels\Human\HumanLargeDeathExplode\HumanLargeDeathExplode.mdl
Set Variable Set TempBolean = "false"
Hashtable - Save TempBolean as (Key hookBolean.) of (Key (Picked unit).) in Hashtable .
Set Variable Set TempReal = "0.00"
Hashtable - Save TempReal as (Key hookTime.) of (Key (Picked unit).) in Hashtable .
Set Variable Set TempInteger = (Load (Key hookNumber.) of (Key (Picked unit).) from Hashtable.)
For each (Integer A) from 1 to TempInteger , do (Actions)
Loop - Actions
Set Variable Set TempUnit = (Load (Key ((String(TempValue)) + (hook + (String((Integer A))))).) of (Key (Picked unit).) in Hashtable.)
Unit - Remove TempUnit from the game
Set Variable Set TempInteger = "0"
Hashtable - Save TempInteger as (Key hookNumber.) of (Key (Picked unit).) in Hashtable .
Else - Actions
Else - Actions
-------- TempUnit2 --------
Set Variable Set TempPoint = (Position of TempUnit)
Set Variable Set TempPoint2 = (Position of TempUnit2)
Set Variable Set TempReal = (Distance between TempPoint and TempPoint2)
Set Variable Set TempReal2 = (Angle from TempPoint to TempPoint2)
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TempReal Greater than 30.00
Then - Actions
Set Variable Set TempReal = (TempReal x 0.20)
Set Variable Set TempPoint = (Position of TempUnit2)
Set Variable Set TempPoint2 = (TempPoint offset by (TempReal x -1.00) towards TempReal2 degrees.)
Custom script: call SetUnitX(udg_TempUnit2, GetLocationX(udg_TempPoint2))
Custom script: call SetUnitY(udg_TempUnit2, GetLocationY(udg_TempPoint2))
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
((Picked unit) belongs to an enemy of (Owner of TempUnit2).) Equal to True
Then - Actions
Set Variable Set TempPoint = (Position of TempUnit)
Set Variable Set TempPoint2 = (Position of TempUnit2)
Set Variable Set TempReal = (Distance between TempPoint and TempPoint2)
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
Set Variable Set TempReal = (TempReal x 0.15)
Unit - Cause (Picked unit) to damage TempUnit2 , dealing (TempReal x (0.05 x (Real((Level of Hook hold for (Picked unit)))))) damage of attack type Spells and damage type Normal
Special Effect - Create a special effect attached to the chest (Unexpected type: 'attachpoint') of TempUnit2 using Objects\Spawnmodels\Human\HumanBlood\BloodElfSpellThiefBlood.mdl
Special Effect - Destroy (Last created special effect)
Else - Actions
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(Integer A) Not equal to TempInteger
Then - Actions
Unit - Make TempUnit2 face TempReal2 over 0 seconds
Else - Actions
Set Variable Set TempReal3 = (Current flying height of TempUnit)
Set Variable Set TempReal3 = ((Current flying height of TempUnit2) - TempReal3)
Set Variable Set TempReal3 = (TempReal3 x -1.00)
Set Variable Set TempReal3 = (TempReal3 x 0.45)
Unit - Add Fly to TempUnit2
Animation - Change TempUnit2 flying height to ((Current flying height of TempUnit2) + TempReal3) at 0.00
Unit - Remove Fly from TempUnit2
-------- TempUnit --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TempReal Greater than 30.00
Then - Actions
Set Variable Set TempPoint = (Position of TempUnit)
Set Variable Set TempPoint2 = (TempPoint offset by TempReal towards TempReal2 degrees.)
Custom script: call SetUnitX(udg_TempUnit, GetLocationX(udg_TempPoint2))
Custom script: call SetUnitY(udg_TempUnit, GetLocationY(udg_TempPoint2))
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
Else - Actions
Unit - Make TempUnit face TempReal2 over 0 seconds
Set Variable Set TempReal3 = (Current flying height of TempUnit2)
Set Variable Set TempReal3 = ((Current flying height of TempUnit) - TempReal3)
Set Variable Set TempReal3 = (TempReal3 x -1.00)
Set Variable Set TempReal3 = (TempReal3 x 0.45)
Unit - Add Fly to TempUnit
Animation - Change TempUnit flying height to ((Current flying height of TempUnit) + TempReal3) at 0.00
Unit - Remove Fly from TempUnit
Else - Actions
Set Variable Set TempBolean = "false"
Hashtable - Save TempBolean as (Key hookBolean.) of (Key (Picked unit).) in Hashtable .
Set Variable Set TempReal = "0.00"
Hashtable - Save TempReal as (Key hookTime.) of (Key (Picked unit).) in Hashtable .
Set Variable Set TempInteger = (Load (Key hookNumber.) of (Key (Picked unit).) from Hashtable.)
For each (Integer A) from 1 to TempInteger , do (Actions)
Loop - Actions
Set Variable Set TempUnit = (Load (Key ((String(TempValue)) + (hook + (String((Integer A))))).) of (Key (Picked unit).) in Hashtable.)
Unit - Remove TempUnit from the game
Set Variable Set TempInteger = "0"
Hashtable - Save TempInteger as (Key hookNumber.) of (Key (Picked unit).) in Hashtable .
Else - Actions
saultCast
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Somersault
Actions
Set Variable Set TempValue = (Custom value of (Triggering unit))
Set Variable Set TempReal = "0.00"
Hashtable - Save TempReal as (Key saultDistance.) of (Key (Triggering unit).) in Hashtable .
Set Variable Set TempReal = "0.00"
Hashtable - Save TempReal as (Key saultTime.) of (Key (Triggering unit).) in Hashtable .
Unit - Turn collision for (Triggering unit) Off .
Unit Group - Add (Triggering unit) to sault_group
Unit - Order (Triggering unit) to Stop .
Set Variable Set TempUnit = (Triggering unit)
Custom script: call SetUnitAnimationByIndex(udg_TempUnit, 12)
saultEffect
Events
Time - Every 0.03 seconds of game time
Conditions
Actions
Unit Group - Pick every unit in sault_group and do (Actions)
Loop - Actions
Set Variable Set TempValue = (Custom value of (Picked unit))
Set Variable Set TempReal = (Load (Key saultTime.) of (Key (Picked unit).) from Hashtable.)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TempReal Less than 0.40
Then - Actions
Set Variable Set TempReal = (TempReal + 0.03)
Hashtable - Save TempReal as (Key saultTime.) of (Key (Picked unit).) in Hashtable .
Unit - Order (Picked unit) to Stop .
Else - Actions
Set Variable Set TempReal = (Load (Key saultDistance.) of (Key (Picked unit).) from Hashtable.)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TempReal Less than 600.00
Then - Actions
Set Variable Set TempReal = (TempReal + 25.00)
Hashtable - Save TempReal as (Key saultDistance.) of (Key (Picked unit).) in Hashtable .
Set Variable Set TempPoint = (Position of (Picked unit))
Set Variable Set TempPoint2 = (TempPoint offset by -25.00 towards (Facing of (Picked unit)) degrees.)
Set Variable Set TempUnit = (Picked unit)
Custom script: call SetUnitX(udg_TempUnit, GetLocationX(udg_TempPoint2))
Custom script: call SetUnitY(udg_TempUnit, GetLocationY(udg_TempPoint2))
Custom script: call RemoveLocation(udg_TempPoint)
Custom script: call RemoveLocation(udg_TempPoint2)
Set Variable Set TempReal = (Load (Key saultDistance.) of (Key (Picked unit).) from Hashtable.)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TempReal Less than or equal to 300.00
Then - Actions
Unit - Add Fly to (Picked unit)
Animation - Change (Picked unit) flying height to 500.00 at 1000.00
Unit - Remove Fly from (Picked unit)
Else - Actions
Unit - Add Fly to (Picked unit)
Animation - Change (Picked unit) flying height to 0.00 at 1000.00
Unit - Remove Fly from (Picked unit)
Else - Actions
Unit Group - Remove (Picked unit) from sault_group .
Unit - Turn collision for (Picked unit) On .
Custom script: call SetUnitAnimationByIndex(udg_TempUnit, 10)
Top