Triggers

Enter map-specific custom script code below. This text will be included in the map script after variables are declared and before any trigger code.

How to import :

1) Copy over Abilities : "Dark Phase" and "dummy stun"
2) Copy Over dummies : "DP_Dummy" and "DP_Dummy2"
3) Copy Over triggers : "Dark Phase" and "Dark Phase loop"
4) Add ability to your hero
5) Test spell

-----------------------------------------
Spell Not working?
COULD BE TO DO WITH MAIN TRIGGER
========================
Spell ID's
However;
You may also need to change the dummy units and ability being cast, in Starting trigger "Dark Phase" This will happen due to differnent ID's;
Since my spell ID's are A002 and A003,
And my dummy units are H000 and H001,

to change these if this is the case navigate to "dark phase " and fine.
(Ability being cast) Equal to Dark Phase, If it says a different spell name, change it.

Set DP_Duration[DP_Index2] = (1.50 + (0.50 x (Real((Level of Dark Phase for DP_Caster[DP_Index2])))))
Set DP_Damage[DP_Index2] = (50.00 + ((Real((Level of Dark Phase for DP_Caster[DP_Index2]))) x 25.00))
The same applies for these two, Change it to make sure that it says Dark Phase

Unit - Add dummy stun to DP_Dummy[DP_Index2]
Unit - Set level of dummy stun for DP_Dummy[DP_Index2] to (Level of Dark Phase for DP_Caster[DP_Index2])

Now here we need to make sure that we have 2 abilties set up correctly, If this is not displayed in the Main trigger; you may need to need change it too look this.

==========================
Unit ID's
Unit - Create 1 DP_Dummy for DP_Player[DP_Index2] at DP_TargetPoint[DP_Index2] facing Default building facing degrees
This is the first dummy unit used; It may change depending on what unit was the Id of H000, You wont require to change ID's jsut reselect the unit from the trigger.

Finally;
Unit - Create 1 DP_Dummy2 for DP_Player[DP_Index2] at DP_TempPoint facing DP_TargetPoint[DP_Index2]
This is the second Dummy unit, Once again it may not say this, due to Unit ID's (As it has generated a new one, if 2 conflict)
So you may need to reselect the unit from the triggers again.=
===========================