How to import Warrior of the chaos of Khorne-- Portrait

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Warrior of the chaos of Khorne-- Portrait of the bundle Warrior of the chaos of Khorne-- Portrait. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Warrior of the chaos Khorne--Warhammer Fantasy HD.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing GuerreroDelCaosDeKhorne_portrait.mdx

Now Click the "Import File" Button:

Next select 'GuerreroDelCaosDeKhorne_portrait.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file GuerreroDelCaosDeKhorne_portrait.mdx.

Importing Armadura_de_Guerrero_del_Caos_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Armadura_de_Guerrero_del_Caos_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Armadura_de_Guerrero_del_Caos_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Armadura_de_Guerrero_del_Caos_Diffuse.dds.

Importing Armadura_de_Guerrero_del_Caos_Normal.dds

Now Click the "Import File" Button:

Next select 'Armadura_de_Guerrero_del_Caos_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Armadura_de_Guerrero_del_Caos_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Armadura_de_Guerrero_del_Caos_Normal.dds.

Importing Armadura_de_Guerrero_del_Caos_Orm.dds

Now Click the "Import File" Button:

Next select 'Armadura_de_Guerrero_del_Caos_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Armadura_de_Guerrero_del_Caos_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Armadura_de_Guerrero_del_Caos_Orm.dds.

Importing Casco_de_Guerrero_del_Caos_diffuse.dds

Now Click the "Import File" Button:

Next select 'Casco_de_Guerrero_del_Caos_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Casco_de_Guerrero_del_Caos_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Casco_de_Guerrero_del_Caos_diffuse.dds.

Importing Casco_de_Guerrero_del_Caos_Normal.dds

Now Click the "Import File" Button:

Next select 'Casco_de_Guerrero_del_Caos_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Casco_de_Guerrero_del_Caos_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Casco_de_Guerrero_del_Caos_Normal.dds.

Importing Casco_de_Guerrero_del_Caos_Orm.dds

Now Click the "Import File" Button:

Next select 'Casco_de_Guerrero_del_Caos_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Casco_de_Guerrero_del_Caos_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Casco_de_Guerrero_del_Caos_Orm.dds.

Importing Cuerpo_de_Guerrero_del_Caos_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Cuerpo_de_Guerrero_del_Caos_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Cuerpo_de_Guerrero_del_Caos_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Cuerpo_de_Guerrero_del_Caos_Diffuse.dds.

Importing Cuerpo_de_Guerrero_del_Caos_Normal.dds

Now Click the "Import File" Button:

Next select 'Cuerpo_de_Guerrero_del_Caos_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Cuerpo_de_Guerrero_del_Caos_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Cuerpo_de_Guerrero_del_Caos_Normal.dds.

Importing Cuerpo_de_Guerrero_del_Caos_Orm.dds

Now Click the "Import File" Button:

Next select 'Cuerpo_de_Guerrero_del_Caos_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Cuerpo_de_Guerrero_del_Caos_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Cuerpo_de_Guerrero_del_Caos_Orm.dds.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: