How to import Void_Narud_New

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Void_Narud_New of the bundle Void_Narud_New. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Void Narud (Starcraft 2).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Void_Narud_New.mdx

Now Click the "Import File" Button:

Next select 'Void_Narud_New.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file Void_Narud_New.mdx.

Importing [Sun]Effect.blp

Now Click the "Import File" Button:

Next select '[Sun]Effect.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file [Sun]Effect.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file [Sun]Effect.blp.

Importing [Sun]Effect2.blp

Now Click the "Import File" Button:

Next select '[Sun]Effect2.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file [Sun]Effect2.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file [Sun]Effect2.blp.

Importing AZ_Shockwave1_White.blp

Now Click the "Import File" Button:

Next select 'AZ_Shockwave1_White.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file AZ_Shockwave1_White.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file AZ_Shockwave1_White.blp.

Importing AzureGlow4.blp

Now Click the "Import File" Button:

Next select 'AzureGlow4.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file AzureGlow4.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file AzureGlow4.blp.

Importing BY_Wood_Eff_Ord_Frm_Smk_1.blp

Now Click the "Import File" Button:

Next select 'BY_Wood_Eff_Ord_Frm_Smk_1.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file BY_Wood_Eff_Ord_Frm_Smk_1.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file BY_Wood_Eff_Ord_Frm_Smk_1.blp.

Importing BY_Wood_Eff_Ord_Sqc_Air_1_4x8.blp

Now Click the "Import File" Button:

Next select 'BY_Wood_Eff_Ord_Sqc_Air_1_4x8.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file BY_Wood_Eff_Ord_Sqc_Air_1_4x8.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file BY_Wood_Eff_Ord_Sqc_Air_1_4x8.blp.

Importing BY_Wood_Effect_Texture_Frame_Ring_11.blp

Now Click the "Import File" Button:

Next select 'BY_Wood_Effect_Texture_Frame_Ring_11.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file BY_Wood_Effect_Texture_Frame_Ring_11.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file BY_Wood_Effect_Texture_Frame_Ring_11.blp.

Importing flareshot_tail.blp

Now Click the "Import File" Button:

Next select 'flareshot_tail.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file flareshot_tail.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file flareshot_tail.blp.

Importing Moon_texiao_heiri_01_luoxuan_luoxuanxuanwo_heise.blp

Now Click the "Import File" Button:

Next select 'Moon_texiao_heiri_01_luoxuan_luoxuanxuanwo_heise.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Moon_texiao_heiri_01_luoxuan_luoxuanxuanwo_heise.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Moon_texiao_heiri_01_luoxuan_luoxuanxuanwo_heise.blp.

Importing Shockwave12_Blue.blp

Now Click the "Import File" Button:

Next select 'Shockwave12_Blue.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Shockwave12_Blue.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Shockwave12_Blue.blp.

Importing void_narud_diff.blp

Now Click the "Import File" Button:

Next select 'void_narud_diff.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file void_narud_diff.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file void_narud_diff.blp.

Importing void_narud_emiss.blp

Now Click the "Import File" Button:

Next select 'void_narud_emiss.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file void_narud_emiss.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file void_narud_emiss.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.