Introduction
This is an automatically generated tutorial. It will guide you through the process of importing the model Vindorei the Forger of the bundle Vindorei the Forger. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.
Extract and Access
I am assuming that you have already downloaded the file Vindorei the Forger.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).
When you have extracted the archive, it should look like this:
Open World Editor and click Module -> Import Manager:
This is the Import Manager. From here you can add and remove custom files from your map file:
Importing vindorei_the_forger.mdx
Now Click the "Import File" Button:
Next select 'vindorei_the_forger.mdx' in the folder which you extracted from the zip archive:
Vindorei the Forger
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
vindorei_skirt_diffuse.dds
The file has been properly added to the map archive:
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
Done, you have imported the file vindorei_the_forger.mdx.
Importing vindorei_fur_diffuse.dds
Now Click the "Import File" Button:
Next select 'vindorei_fur_diffuse.dds' in the folder which you extracted from the zip archive:
Vindorei the Forger
vindorei_the_forger.mdx
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
vindorei_skirt_diffuse.dds
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
war3mapimported/vindorei_fur_diffuse.dds
Double-click the file vindorei_fur_diffuse.dds:
vindorei_fur_diffuse.dds
Image / Texture
5,461
war3mapimported/vindorei_fur_diffuse.dds
Tick the box "Use Custom Path" and type in the correct path:
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
The file has been properly added to the map archive:
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
Done, you have imported the file vindorei_fur_diffuse.dds.
Importing vindorei_hammer_diffuse.dds
Now Click the "Import File" Button:
Next select 'vindorei_hammer_diffuse.dds' in the folder which you extracted from the zip archive:
Vindorei the Forger
vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
vindorei_skirt_diffuse.dds
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
Image / Texture
1,365
war3mapimported/vindorei_hammer_diffuse.dds
Double-click the file vindorei_hammer_diffuse.dds:
vindorei_hammer_diffuse.dds
Image / Texture
1,365
war3mapimported/vindorei_hammer_diffuse.dds
Tick the box "Use Custom Path" and type in the correct path:
vindorei_hammer_diffuse.dds
Image / Texture
1,365
vindorei_hammer_diffuse.dds
The file has been properly added to the map archive:
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
Image / Texture
1,365
vindorei_hammer_diffuse.dds
Done, you have imported the file vindorei_hammer_diffuse.dds.
Importing vindorei_minikony2_diffuse.dds
Now Click the "Import File" Button:
Next select 'vindorei_minikony2_diffuse.dds' in the folder which you extracted from the zip archive:
Vindorei the Forger
vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
vindorei_skirt_diffuse.dds
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
Image / Texture
1,365
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
Image / Texture
2,731
war3mapimported/vindorei_minikony2_diffuse.dds
Double-click the file vindorei_minikony2_diffuse.dds:
vindorei_minikony2_diffuse.dds
Image / Texture
2,731
war3mapimported/vindorei_minikony2_diffuse.dds
Tick the box "Use Custom Path" and type in the correct path:
vindorei_minikony2_diffuse.dds
Image / Texture
2,731
vindorei_minikony2_diffuse.dds
The file has been properly added to the map archive:
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
Image / Texture
1,365
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
Image / Texture
2,731
vindorei_minikony2_diffuse.dds
Done, you have imported the file vindorei_minikony2_diffuse.dds.
Importing vindorei_minikony_diffuse.dds
Now Click the "Import File" Button:
Next select 'vindorei_minikony_diffuse.dds' in the folder which you extracted from the zip archive:
Vindorei the Forger
vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
vindorei_skirt_diffuse.dds
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
Image / Texture
1,365
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
Image / Texture
2,731
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
Image / Texture
5,461
war3mapimported/vindorei_minikony_diffuse.dds
Double-click the file vindorei_minikony_diffuse.dds:
vindorei_minikony_diffuse.dds
Image / Texture
5,461
war3mapimported/vindorei_minikony_diffuse.dds
Tick the box "Use Custom Path" and type in the correct path:
vindorei_minikony_diffuse.dds
Image / Texture
5,461
vindorei_minikony_diffuse.dds
The file has been properly added to the map archive:
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
Image / Texture
1,365
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
Image / Texture
2,731
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
Image / Texture
5,461
vindorei_minikony_diffuse.dds
Done, you have imported the file vindorei_minikony_diffuse.dds.
Importing vindorei_skirt_diffuse.dds
Now Click the "Import File" Button:
Next select 'vindorei_skirt_diffuse.dds' in the folder which you extracted from the zip archive:
Vindorei the Forger
vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
vindorei_skirt_diffuse.dds
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
Image / Texture
1,365
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
Image / Texture
2,731
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
Image / Texture
5,461
vindorei_minikony_diffuse.dds
vindorei_skirt_diffuse.dds
Image / Texture
5,461
war3mapimported/vindorei_skirt_diffuse.dds
Double-click the file vindorei_skirt_diffuse.dds:
vindorei_skirt_diffuse.dds
Image / Texture
5,461
war3mapimported/vindorei_skirt_diffuse.dds
Tick the box "Use Custom Path" and type in the correct path:
vindorei_skirt_diffuse.dds
Image / Texture
5,461
vindorei_skirt_diffuse.dds
The file has been properly added to the map archive:
vindorei_the_forger.mdx
Model
2,056
war3mapimported/vindorei_the_forger.mdx
vindorei_fur_diffuse.dds
Image / Texture
5,461
vindorei_fur_diffuse.dds
vindorei_hammer_diffuse.dds
Image / Texture
1,365
vindorei_hammer_diffuse.dds
vindorei_minikony2_diffuse.dds
Image / Texture
2,731
vindorei_minikony2_diffuse.dds
vindorei_minikony_diffuse.dds
Image / Texture
5,461
vindorei_minikony_diffuse.dds
vindorei_skirt_diffuse.dds
Image / Texture
5,461
vindorei_skirt_diffuse.dds
Done, you have imported the file vindorei_skirt_diffuse.dds.
You're done
You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.
If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:
- Link to the model and the tutorial
- Precise description of what does not work
- The map you tried to import it to (with the model imported)
And we will do what we can to help you.