How to import Uther Gate

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Uther Gate of the bundle Uther Gate. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Doodads Uthers.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing UtherGate.mdx

Now Click the "Import File" Button:

Next select 'UtherGate.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file UtherGate.mdx.

Importing 6hu_garrison_armorymetalstrips.blp

Now Click the "Import File" Button:

Next select '6hu_garrison_armorymetalstrips.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_garrison_armorymetalstrips.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_garrison_armorymetalstrips.blp.

Importing 6hu_garrison_barn_roof.blp

Now Click the "Import File" Button:

Next select '6hu_garrison_barn_roof.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_garrison_barn_roof.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_garrison_barn_roof.blp.

Importing 6hu_garrison_copper_post.blp

Now Click the "Import File" Button:

Next select '6hu_garrison_copper_post.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_garrison_copper_post.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_garrison_copper_post.blp.

Importing 6hu_garrison_crenulation.blp

Now Click the "Import File" Button:

Next select '6hu_garrison_crenulation.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_garrison_crenulation.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_garrison_crenulation.blp.

Importing 6hu_garrison_metal_trims.blp

Now Click the "Import File" Button:

Next select '6hu_garrison_metal_trims.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_garrison_metal_trims.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_garrison_metal_trims.blp.

Importing 6hu_garrison_woodpanels_end.blp

Now Click the "Import File" Button:

Next select '6hu_garrison_woodpanels_end.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_garrison_woodpanels_end.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_garrison_woodpanels_end.blp.

Importing 7af_pld_pillars03.blp

Now Click the "Import File" Button:

Next select '7af_pld_pillars03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 7af_pld_pillars03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 7af_pld_pillars03.blp.

Importing garrison_pillar_uv_layout.blp

Now Click the "Import File" Button:

Next select 'garrison_pillar_uv_layout.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file garrison_pillar_uv_layout.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file garrison_pillar_uv_layout.blp.

Importing lt_strmwnd_trim_02_color.blp

Now Click the "Import File" Button:

Next select 'lt_strmwnd_trim_02_color.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file lt_strmwnd_trim_02_color.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file lt_strmwnd_trim_02_color.blp.

Importing lt_strmwnd_wall_05.blp

Now Click the "Import File" Button:

Next select 'lt_strmwnd_wall_05.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file lt_strmwnd_wall_05.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file lt_strmwnd_wall_05.blp.

Importing lt_strmwnd_wall_07.blp

Now Click the "Import File" Button:

Next select 'lt_strmwnd_wall_07.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file lt_strmwnd_wall_07.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file lt_strmwnd_wall_07.blp.

Importing uthertomb_pillardeco01_1024.blp

Now Click the "Import File" Button:

Next select 'uthertomb_pillardeco01_1024.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file uthertomb_pillardeco01_1024.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file uthertomb_pillardeco01_1024.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: