How to import Undead Slaughterhouse (Entire Structure Interior)

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Undead Slaughterhouse (Entire Structure Interior) of the bundle Undead Slaughterhouse (Entire Structure Interior). Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Undead Slaughterhouse (Entire Structure Interior).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing UndeadSlaughterhouse.mdx

Now Click the "Import File" Button:

Next select 'UndeadSlaughterhouse.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file UndeadSlaughterhouse.mdx.

Importing jlo_undeadzigg_chain.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_chain.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_chain.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_chain.blp.

Importing jlo_undeadzigg_chain02.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_chain02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_chain02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_chain02.blp.

Importing jlo_undeadzigg_floor.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_floor.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_floor.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_floor.blp.

Importing jlo_undeadzigg_floor2.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_floor2.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_floor2.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_floor2.blp.

Importing jlo_undeadzigg_trim01.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim01.blp.

Importing jlo_undeadzigg_trim03.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim03.blp.

Importing jlo_undeadzigg_trim04.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim04.blp.

Importing jlo_undeadzigg_trim05.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim05.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim05.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim05.blp.

Importing jlo_undeadzigg_trim06.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim06.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim06.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim06.blp.

Importing jlo_undeadzigg_trim07.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim07.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim07.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim07.blp.

Importing jlo_undeadzigg_trim08.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim08.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim08.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim08.blp.

Importing jlo_undeadzigg_wall01.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_wall01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_wall01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_wall01.blp.

Importing jlo_undeadzigg_web128.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_web128.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_web128.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_web128.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.