• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

Spin.w3x
Variables
This Map
Description
Thanks to
Initz
Mana and Hit Points
The Spell
Settings
Cast
Spell
Enter map-specific custom script code below. This text will be included in the map script after variables are declared and before any trigger code.
Name Type is_array initial_value
ele_Ability abilcode No
ele_Damage real Yes
ele_Dummy unitcode No
ele_Dummy2 unitcode No
ele_LoopInteger integer No
ele_Range real Yes
ele_TargetGroup group No
ele_TargetLoc location No
ele_TempGroup group No
ele_TempLight location No
ele_TempLoc location No
ele_TempUnit unit No
ele_Time real Yes
///////////////////////////////////////////////////////////////////////////////////
// Call some winds and magical forces to spin the enemies in a targeted area. //
// It spins and spins untill the units dies, they get out from the magical area or //
// the magic ends. This is good at holding enemies close to you while you can //
// attack, killing large groups or just having fun. //
// //
// Level 1 - 80-200 total damage to units in AoE 250. Lasts 5 seconds. //
// Level 2 - 200-500 total damage to units in AoE 350. Lasts 10 seconds. //
// Level 3 - 500-750 total damage to units in AoE 500. Lasts 15 seconds. //
///////////////////////////////////////////////////////////////////////////////////

-

Version Log:

Version 1.0
By: eleljrk
Thanks to: Billy the Cat

- First release

Version 1.1
By: eleljrk
Thanks to: Shdow89

- Fixed a leak
- Changed the effect
- Made "Cast" trigger more "good looking"

-

HOW TO IMPORT:
Copy "The Spell" folder, then open your map in "Open" or "Open As", or maby you got a tab open, then click Window -> Your map name

Now, you have to enabled "Automatically create unknown variables while pasting trigger data".
You can enable that by: File -> Preferences -> General -> Then Check: "Automatically create unknown variables while pasting trigger data"!

Now open your Trigger Editor and Paste the Folder there, there is a chance that not all triggers are enabled, enabled them by looking over the triggers and open disabled Actions and then hit OK, if that wont work, take a better look on this map and learn what to do.

Enjoy, your spell is Imported to your map!
Orginal by: eleljrk

Thanks to: Billy the Cat, Shdow89
Models: Ehmm.. None? :S The Dummy is unknown Author
Initz
Events
Map initialization
Conditions
Actions
Visibility - Disable fog of war
Visibility - Disable black mask
Hero - Set made this spell 0078 <gen> Hero-level to 10 , Hide level-up graphics
Mana and Hit Points
Events
Time - Every 0.50 seconds of game time
Conditions
Actions
Unit - Set life of made this spell 0078 <gen> to 100 %
Unit - Set mana of made this spell 0078 <gen> to 100 %
Settings
Events
Map initialization
Conditions
Actions
-------- This is the unit that will make units spin --------
-------- I recommand to use the Model in the Import Manager on this dummy --------
Set Variable Set ele_Dummy = "h001"
-------- This is the unit that will make the AoE marking. --------
Set Variable Set ele_Dummy2 = "h000"
-------- This is the Dummy unit that will run the Spell and start the action. --------
Set Variable Set ele_Ability = "HOME"
-------- This will set the damage of each level --------
-------- Each level will be the Array, all you need to add after the Array is in the Object Editor. --------
Set Variable Set ele_Damage[1] = "0.50"
Set Variable Set ele_Damage[2] = "0.75"
Set Variable Set ele_Damage[3] = "1.00"
-------- This is the duration time of this spell. --------
-------- Each level will be the Array, all you need to add after the Array is in the Object Editor. --------
Set Variable Set ele_Time[1] = "5.00"
Set Variable Set ele_Time[2] = "10.00"
Set Variable Set ele_Time[3] = "15.00"
-------- This is the range (AoE) of this spell. All units in this area will be damaged. --------
-------- Each level will be the Array, all you need to add after the Array is in the Object Editor. --------
Set Variable Set ele_Range[1] = "250.00"
Set Variable Set ele_Range[2] = "350.00"
Set Variable Set ele_Range[3] = "500.00"
You dont need to edit this.

Here the spell STARTS and creates some cool effects, nothing needed to be changed..
Cast
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to ele_Ability
Actions
Set Variable Set ele_TempLoc = (Target point of ability being cast)
Unit - Create 1 . ele_Dummy for (Owner of (Triggering unit)) at ele_TempLoc facing Default building facing degrees
Unit - Set the custom value of (Last created unit) to (Level of ele_Ability for (Triggering unit))
Unit - Add a ele_Time[(Level of ele_Ability for (Triggering unit))] second Generic expiration timer to (Last created unit)
For each (Integer ele_LoopInteger ) from 1 to 8 , do (Actions)
Loop - Actions
Set Variable Set ele_TempLight = (ele_TempLoc offset by ele_Range[(Level of ele_Ability for (Triggering unit))] towards ((Real(ele_LoopInteger)) x 45.00) degrees.)
Unit - Create 1 ele_Dummy2 for (Owner of (Triggering unit)) at ele_TempLight facing ele_TempLoc
Unit - Add a ele_Time[(Level of ele_Ability for (Triggering unit))] second Generic expiration timer to (Last created unit)
Custom script: call RemoveLocation(udg_ele_TempLight)
Custom script: call RemoveLocation(udg_ele_TempLoc)
You dont need to edit this.

Here the spell RUNS, does damage and spin the units. Nothing needed to be changed..
Spell
Events
Time - Every 0.03 seconds of game time
Conditions
Actions
Set Variable Set ele_TempGroup = (Units of type ele_Dummy)
Unit Group - Pick every unit in ele_TempGroup and do (Actions)
Loop - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
((Picked unit) is alive) Equal to True
Then - Actions
Set Variable Set ele_TempUnit = (Picked unit)
Set Variable Set ele_TempLoc = (Position of ele_TempUnit)
Set Variable Set ele_TargetGroup = (Units within ele_Range[(Custom value of ele_TempUnit)] of ele_TempLoc.)
Custom script: call RemoveLocation(udg_ele_TempLoc)
Unit Group - Pick every unit in ele_TargetGroup and do (Actions)
Loop - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
((Picked unit) is alive) Equal to True
((Picked unit) belongs to an enemy of (Owner of ele_TempUnit).) Equal to True
((Picked unit) is A structure) Equal to False
((Picked unit) is A flying unit) Equal to False
((Picked unit) is Magic Immune) Equal to False
Then - Actions
Unit - Cause ele_TempUnit to damage (Picked unit) , dealing ele_Damage[(Custom value of ele_TempUnit)] damage of attack type Magic and damage type Magic
Set Variable Set ele_TempLoc = (Position of (Picked unit))
Special Effect - Create a special effect at ele_TempLoc using Abilities\Spells\NightElf\SpiritOfVengeance\SpiritOfVengeanceOrbs1.mdl
Special Effect - Destroy (Last created special effect)
Set Variable Set ele_TargetLoc = (ele_TempLoc offset by (Random real number between 5.00 and 10.00) towards ((Facing of (Picked unit)) + (Random real number between 0.00 and 45.00)) degrees.)
Unit - Move (Picked unit) instantly to ele_TargetLoc
Custom script: call RemoveLocation(udg_ele_TargetLoc)
Set Variable Set ele_TargetLoc = (ele_TempLoc offset by 50.00 towards ((Facing of (Picked unit)) + 45.00) degrees.)
Unit - Make (Picked unit) face ele_TargetLoc over 0 seconds
Custom script: call RemoveLocation(udg_ele_TargetLoc)
Custom script: call RemoveLocation(udg_ele_TempLoc)
Else - Actions
Unit Group - Remove (Picked unit) from ele_TargetGroup .
Custom script: call DestroyGroup(udg_ele_TargetGroup)
Set Variable Set ele_TempUnit = No unit
Else - Actions
Unit Group - Remove (Picked unit) from ele_TempGroup .
Unit - Remove (Picked unit) from the game
Custom script: call DestroyGroup(udg_ele_TempGroup)
Top