• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

Shockwave v1.1.w3x
Variables
Not Needed for the skill
ESC
Creep Spawn
Creep Recreate
GetIssueOrderId
Shockwave
Instructions!
Shockwave Cast
Shockwave Loop
Samples
Shockwave
Carrion Swarm
Carrion Swarm Heal
Incineration Wave
Incineration Wave Extra
Silence Wave
Silence Wave Extra
Name Type is_array initial_value
SW_Ability abilcode No
SW_AffectAir boolean Yes
SW_AffectAlly boolean Yes
SW_AffectEnemy boolean Yes
SW_AffectGround boolean Yes
SW_AffectStructure boolean Yes
SW_Angle real No
SW_AreaCurrent real Yes
SW_AreaFinal real Yes
SW_AreaGrowth real Yes
SW_AreaInitial real Yes
SW_Attachment string No
SW_AttackType attacktype Yes
SW_Caster unit Yes
SW_Damage real Yes
SW_DamageType damagetype Yes
SW_DamageX real Yes
SW_Distance real Yes
SW_DistanceX real Yes
SW_Dummy unit Yes
SW_ExtraEffect trigger Yes
SW_ExtraEffectCheck boolean Yes
SW_ExtraEffectTarget trigger Yes
SW_ExtraEffectTargetCheck boolean Yes
SW_Group group No
SW_GroupDone group Yes
SW_Loop integer No
SW_LoopingSfx boolean Yes
SW_Lvl integer Yes
SW_Max integer No
SW_NextPoint location Yes
SW_OneInstance boolean Yes
SW_Point location Yes
SW_Speed real Yes
SW_SpeedX real Yes
SW_Wave effect Yes
SW_WaveEffect string Yes
SW_WaveEffectEnd string Yes
SW_WaveEffectLoop string Yes
TempPoint location Yes
TempUnit unit No
ESC
Events
Player - Player 1 (Red) skips a cinematic sequence
Conditions
Actions
Unit Group - Pick every unit in (Units owned by Player 1 (Red) of type please give credits to me...) and do (Actions)
Loop - Actions
Unit - Set life of (Picked unit) to 100 %
Unit - Set mana of (Picked unit) to 100 %
Unit - Reset ability cooldowns for (Picked unit) .
Hero - Set (Picked unit) Hero-level to ((Hero level of (Picked unit)) + 1) , Show level-up graphics
Creep Spawn
Events
Map initialization
Conditions
Actions
Visibility - Disable fog of war
Visibility - Disable black mask
Set Variable Set TempPoint[0] = (Center of (Playable map area))
Unit - Create 5 . Footman for Player 1 (Red) at TempPoint[0] facing Default building facing degrees
Unit - Create 5 . Footman for Neutral Hostile at TempPoint[0] facing Default building facing degrees
Unit - Create 3 . Priest for Neutral Hostile at TempPoint[0] facing Default building facing degrees
Unit - Create 2 . Gryphon Rider for Neutral Hostile at TempPoint[0] facing Default building facing degrees
Custom script: call RemoveLocation(udg_TempPoint[0])
Creep Recreate
Events
Unit - A unit Dies
Conditions
Actions
Custom script: local unit u = GetTriggerUnit()
Set Variable Set TempPoint[0] = (Center of (Playable map area))
Custom script: call CreateNUnitsAtLoc( 1, GetUnitTypeId(u), GetOwningPlayer(u), udg_TempPoint[0], bj_UNIT_FACING )
Custom script: call RemoveUnit(u)
Custom script: call RemoveLocation(udg_TempPoint[0])
GetIssueOrderId
Events
Unit - A unit Is issued an order targeting an object
Unit - A unit Is issued an order targeting a point
Unit - A unit Is issued an order with no target
Conditions
(Owner of (Ordered unit)) Equal to Player 1 (Red)
Actions
Custom script: call BJDebugMsg(OrderId2String(GetIssuedOrderId()) + " ---- " + I2S(GetIssuedOrderId()))

Copy this in Object Editor:
• Units - Dummy

===========================
===========================

Then, do this action:
1. Click 'File' then 'Preferences'
2. Find 'Automatically create unknown variables while pasting trigger data'
3. put a 'Check' mark on the box near it. (this will allow auto-creating of variables)

===========================
===========================

Done!
Shockwave Cast
Events
Conditions
Actions
Unit - Create 1 Dummy for (Owner of SW_Caster[SW_Max]) at SW_Point[0] facing SW_Point[1]
Set Variable Set SW_Dummy[SW_Max] = (Last created unit)
Unit - Turn collision for SW_Dummy[SW_Max] Off .
Set Variable Set SW_AreaGrowth[SW_Max] = ((SW_AreaFinal[SW_Lvl[SW_Max]] - SW_AreaInitial[SW_Lvl[SW_Max]]) / ((1 / 0.03) x (SW_Distance[SW_Lvl[SW_Max]] / SW_Speed[SW_Lvl[SW_Max]])))
Set Variable Set SW_AreaCurrent[SW_Max] = SW_AreaInitial[SW_Lvl[SW_Max]]
Special Effect - Create a special effect attached to the SW_Attachment of SW_Dummy[SW_Max] using SW_WaveEffect[SW_Max]
Set Variable Set SW_Wave[SW_Max] = (Last created special effect)
Custom script: set udg_SW_GroupDone[udg_SW_Max] = CreateGroup()
Set Variable Set SW_DistanceX[SW_Max] = SW_Distance[SW_Lvl[SW_Max]]
Set Variable Set SW_SpeedX[SW_Max] = SW_Speed[SW_Lvl[SW_Max]]
Set Variable Set SW_DamageX[SW_Max] = SW_Damage[SW_Lvl[SW_Max]]
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
SW_Max Equal to 1
Then - Actions
Trigger - Turn on Shockwave_Loop <gen>
Else - Actions
Custom script: call RemoveLocation(udg_SW_Point[0])
Custom script: call RemoveLocation(udg_SW_Point[1])
Shockwave Loop
Events
Time - Every 0.03 seconds of game time
Conditions
Actions
For each (Integer SW_Loop ) from 1 to SW_Max , do (Actions)
Loop - Actions
Set Variable Set SW_DistanceX[SW_Loop] = (SW_DistanceX[SW_Loop] - (SW_SpeedX[SW_Loop] / (1 / 0.03)))
Set Variable Set SW_Angle = (Facing of SW_Dummy[SW_Loop])
Set Variable Set SW_NextPoint[0] = (Position of SW_Dummy[SW_Loop])
Set Variable Set SW_NextPoint[1] = (SW_NextPoint[0] offset by (SW_SpeedX[SW_Loop] / (1.00 / 0.03)) towards SW_Angle degrees.)
Set Variable Set SW_AreaCurrent[SW_Loop] = (SW_AreaCurrent[SW_Loop] + SW_AreaGrowth[SW_Loop])
Set Variable Set SW_Group = (Units within SW_AreaCurrent[SW_Loop] of SW_NextPoint[1].)
Unit - Move SW_Dummy[SW_Loop] instantly to SW_NextPoint[1] , facing SW_Angle degrees
If (SW_ExtraEffectCheck[SW_Loop] Equal to True) then do (Run SW_ExtraEffect[SW_Loop] (checking conditions)) else do (Do nothing)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
SW_LoopingSfx[SW_Loop] Equal to True
Then - Actions
Special Effect - Create a special effect at SW_NextPoint[0] using SW_WaveEffectLoop[SW_Loop]
Special Effect - Destroy (Last created special effect)
Else - Actions
Unit Group - Pick every unit in SW_Group and do (Actions)
Loop - Actions
Set Variable Set TempUnit = (Picked unit)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(TempUnit belongs to an enemy of (Owner of SW_Caster[SW_Loop]).) Equal to SW_AffectEnemy[SW_Loop]
SW_AffectEnemy[SW_Loop] Equal to True
(TempUnit is in SW_GroupDone[SW_Loop].) Equal to False
Or - Any (Conditions) are true
Conditions
((TempUnit is A flying unit) Equal to SW_AffectAir[SW_Loop]) and (SW_AffectAir[SW_Loop] Equal to True)
((TempUnit is A ground unit) Equal to SW_AffectGround[SW_Loop]) and (SW_AffectGround[SW_Loop] Equal to True)
((TempUnit is A structure) Equal to SW_AffectStructure[SW_Loop]) and (SW_AffectStructure[SW_Loop] Equal to True)
Then - Actions
Unit - Cause SW_Caster[SW_Loop] to damage TempUnit , dealing SW_DamageX[SW_Loop] damage of attack type SW_AttackType[SW_Loop] and damage type SW_DamageType[SW_Loop]
If (SW_ExtraEffectTargetCheck[SW_Loop] Equal to True) then do (Run SW_ExtraEffectTarget[SW_Loop] (checking conditions)) else do (Do nothing)
If (SW_OneInstance[SW_Loop] Equal to True) then do (Add TempUnit to SW_GroupDone[SW_Loop]) else do (Do nothing)
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(TempUnit belongs to an ally of (Owner of SW_Caster[SW_Loop]).) Equal to SW_AffectAlly[SW_Loop]
SW_AffectAlly[SW_Loop] Equal to True
(TempUnit is in SW_GroupDone[SW_Loop].) Equal to False
Or - Any (Conditions) are true
Conditions
((TempUnit is A flying unit) Equal to SW_AffectAir[SW_Loop]) and (SW_AffectAir[SW_Loop] Equal to True)
((TempUnit is A ground unit) Equal to SW_AffectGround[SW_Loop]) and (SW_AffectGround[SW_Loop] Equal to True)
((TempUnit is A structure) Equal to SW_AffectStructure[SW_Loop]) and (SW_AffectStructure[SW_Loop] Equal to True)
Then - Actions
If (SW_ExtraEffectTargetCheck[SW_Loop] Equal to True) then do (Run SW_ExtraEffectTarget[SW_Loop] (checking conditions)) else do (Do nothing)
If (SW_OneInstance[SW_Loop] Equal to True) then do (Add TempUnit to SW_GroupDone[SW_Loop]) else do (Do nothing)
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
SW_DistanceX[SW_Loop] Less than or equal to 0.00
Then - Actions
Special Effect - Create a special effect attached to the origin (Unexpected type: 'attachpoint') of SW_Dummy[SW_Loop] using SW_WaveEffectEnd[SW_Loop]
Special Effect - Destroy (Last created special effect)
Special Effect - Destroy SW_Wave[SW_Loop]
Custom script: call DestroyGroup( udg_SW_GroupDone[udg_SW_Loop] )
Set Variable Set SW_GroupDone[SW_Loop] = SW_GroupDone[SW_Max]
Set Variable Set SW_Caster[SW_Loop] = SW_Caster[SW_Max]
Set Variable Set SW_Caster[SW_Max] = No unit
Unit - Kill SW_Dummy[SW_Loop]
Set Variable Set SW_Dummy[SW_Loop] = SW_Dummy[SW_Max]
Set Variable Set SW_Dummy[SW_Max] = No unit
Set Variable Set SW_Wave[SW_Loop] = SW_Wave[SW_Max]
Set Variable Set SW_WaveEffectEnd[SW_Loop] = SW_WaveEffectEnd[SW_Max]
Set Variable Set SW_WaveEffectLoop[SW_Loop] = SW_WaveEffectLoop[SW_Max]
Set Variable Set SW_LoopingSfx[SW_Loop] = SW_LoopingSfx[SW_Max]
Set Variable Set SW_ExtraEffectCheck[SW_Loop] = SW_ExtraEffectCheck[SW_Max]
Set Variable Set SW_ExtraEffect[SW_Loop] = SW_ExtraEffect[SW_Max]
Set Variable Set SW_ExtraEffectTargetCheck[SW_Loop] = SW_ExtraEffectTargetCheck[SW_Max]
Set Variable Set SW_ExtraEffectTarget[SW_Loop] = SW_ExtraEffectTarget[SW_Max]
Set Variable Set SW_AffectAlly[SW_Loop] = SW_AffectAlly[SW_Max]
Set Variable Set SW_AffectEnemy[SW_Loop] = SW_AffectEnemy[SW_Max]
Set Variable Set SW_AffectAir[SW_Loop] = SW_AffectAir[SW_Max]
Set Variable Set SW_AffectStructure[SW_Loop] = SW_AffectStructure[SW_Max]
Set Variable Set SW_AffectGround[SW_Loop] = SW_AffectGround[SW_Max]
Set Variable Set SW_OneInstance[SW_Loop] = SW_OneInstance[SW_Max]
Set Variable Set SW_AttackType[SW_Loop] = SW_AttackType[SW_Max]
Set Variable Set SW_DamageType[SW_Loop] = SW_DamageType[SW_Max]
Set Variable Set SW_DamageX[SW_Loop] = SW_DamageX[SW_Max]
Set Variable Set SW_AreaCurrent[SW_Loop] = SW_AreaCurrent[SW_Max]
Set Variable Set SW_AreaGrowth[SW_Loop] = SW_AreaGrowth[SW_Max]
Set Variable Set SW_SpeedX[SW_Loop] = SW_SpeedX[SW_Max]
Set Variable Set SW_DistanceX[SW_Loop] = SW_DistanceX[SW_Max]
Set Variable Set SW_Lvl[SW_Loop] = SW_Lvl[SW_Max]
Set Variable Set SW_Max = (SW_Max - 1)
Set Variable Set SW_Loop = (SW_Loop - 1)
Else - Actions
Custom script: call RemoveLocation(udg_SW_NextPoint[0])
Custom script: call RemoveLocation(udg_SW_NextPoint[1])
Custom script: call DestroyGroup( udg_SW_Group )
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
SW_Max Equal to 0
Then - Actions
Trigger - Turn off (This trigger)
Else - Actions
Shockwave
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Shockwave (Trigger)
Actions
-------- ------------------------------------------------------------ --------
Set Variable Set SW_Max = (SW_Max + 1)
Set Variable Set SW_Caster[SW_Max] = (Triggering unit)
Set Variable Set SW_Point[0] = (Position of (Triggering unit))
Set Variable Set SW_Point[1] = (Target point of ability being cast)
Set Variable Set SW_Lvl[SW_Max] = (Level of (Ability being cast) for (Triggering unit))
-------- ------------------------------------------------------------ --------
Set Variable Set SW_WaveEffect[SW_Max] = "Abilities\Spells\Orc\Shockwave\ShockwaveMissile.mdl"
-------- Declares what Sfx will the Shockwave be based on. --------
Set Variable Set SW_WaveEffectEnd[SW_Max] = "Abilities\Spells\Other\Doom\DoomDeath.mdl"
-------- Declares what Sfx will played when the Shockwave reaches its max distance. --------
Set Variable Set SW_LoopingSfx[SW_Max] = "false"
-------- If set to True, it will allow the Shockwave to display a looping Sfx. It requires declaration of "SW_WaveEffectLoop". --------
-------- An example of the "SW_WaveEffectLoop" can be found in the Incineration Wave trigger. --------
Set Variable Set SW_ExtraEffectCheck[SW_Max] = "false"
-------- If set to True, it will allow the Shockwave to do a specific effect. It requires declaration of "SW_ExtraEffect". --------
-------- An example of the "SW_ExtraEffect" can be found in the Silence Wave trigger. --------
Set Variable Set SW_ExtraEffectTargetCheck[SW_Max] = "false"
-------- If set to True, it will allow the Shockwave to do a specific effect on an affected. It requires declaration of "SW_ExtraEffectTarget". --------
-------- An example of the "SW_ExtraEffectTarget" can be found in the Carrion Swarm trigger. --------
Set Variable Set SW_AffectAlly[SW_Max] = "false"
Set Variable Set SW_AffectEnemy[SW_Max] = "true"
Set Variable Set SW_AffectAir[SW_Max] = "false"
Set Variable Set SW_AffectGround[SW_Max] = "true"
Set Variable Set SW_AffectStructure[SW_Max] = "false"
-------- Allows selection of which units will be affected by the Shockwave. --------
Set Variable Set SW_OneInstance[SW_Max] = "false"
-------- If set to True, then the instance of the effect/damage to a unit will only be once. --------
Set Variable Set SW_AttackType[SW_Max] = Spells
-------- Determines what kind of attack type the Shockwave will do. --------
Set Variable Set SW_DamageType[SW_Max] = Magic
-------- Determines what kind of damage type the Shockwave will do. --------
Set Variable Set SW_Attachment = "origin"
-------- Determines where the Shockwave Sfx will be attached to from the Dummy. Only used for giving some height to the wave. --------
Set Variable Set SW_Damage[1] = "10.00"
Set Variable Set SW_Damage[2] = "20.00"
Set Variable Set SW_Damage[3] = "30.00"
-------- Determines the amount of damage dealt. --------
Set Variable Set SW_AreaInitial[1] = "125.00"
Set Variable Set SW_AreaInitial[2] = "125.00"
Set Variable Set SW_AreaInitial[3] = "125.00"
-------- Determines the initial area of the Shockwave. --------
Set Variable Set SW_AreaFinal[1] = "125.00"
Set Variable Set SW_AreaFinal[2] = "125.00"
Set Variable Set SW_AreaFinal[3] = "125.00"
-------- Determines the final area of the Shockwave. --------
Set Variable Set SW_Speed[1] = "1050.00"
Set Variable Set SW_Speed[2] = "1050.00"
Set Variable Set SW_Speed[3] = "1050.00"
-------- Determines the speed of the Shockwave. --------
Set Variable Set SW_Distance[1] = "400.00"
Set Variable Set SW_Distance[2] = "1000.00"
Set Variable Set SW_Distance[3] = "1800.00"
-------- Determines the max distance that the Shockwave will travel. --------
Trigger - Run Shockwave_Cast <gen> (ignoring conditions)
Carrion Swarm
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Carrion Swarm (Trigger)
Actions
Set Variable Set SW_Max = (SW_Max + 1)
Set Variable Set SW_Caster[SW_Max] = (Triggering unit)
Set Variable Set SW_Point[0] = (Position of (Triggering unit))
Set Variable Set SW_Point[1] = (Target point of ability being cast)
Set Variable Set SW_Lvl[SW_Max] = (Level of (Ability being cast) for (Triggering unit))
Set Variable Set SW_WaveEffect[SW_Max] = "Abilities\Spells\Undead\CarrionSwarm\CarrionSwarmMissile.mdl"
Set Variable Set SW_WaveEffectEnd[SW_Max] = ""
Set Variable Set SW_LoopingSfx[SW_Max] = "false"
Set Variable Set SW_ExtraEffectTargetCheck[SW_Max] = "true"
Set Variable Set SW_ExtraEffectTarget[SW_Max] = Carrion_Swarm_Heal <gen>
Set Variable Set SW_AffectAlly[SW_Max] = "true"
Set Variable Set SW_AffectEnemy[SW_Max] = "true"
Set Variable Set SW_AffectAir[SW_Max] = "true"
Set Variable Set SW_AffectGround[SW_Max] = "true"
Set Variable Set SW_AffectStructure[SW_Max] = "false"
Set Variable Set SW_OneInstance[SW_Max] = "true"
Set Variable Set SW_AttackType[SW_Max] = Spells
Set Variable Set SW_DamageType[SW_Max] = Magic
Set Variable Set SW_Attachment = "origin"
Set Variable Set SW_Damage[1] = "100.00"
Set Variable Set SW_Damage[2] = "200.00"
Set Variable Set SW_Damage[3] = "300.00"
Set Variable Set SW_AreaInitial[1] = "100.00"
Set Variable Set SW_AreaInitial[2] = "100.00"
Set Variable Set SW_AreaInitial[3] = "100.00"
Set Variable Set SW_AreaFinal[1] = "500.00"
Set Variable Set SW_AreaFinal[2] = "500.00"
Set Variable Set SW_AreaFinal[3] = "500.00"
Set Variable Set SW_Speed[1] = "1100.00"
Set Variable Set SW_Speed[2] = "1100.00"
Set Variable Set SW_Speed[3] = "1100.00"
Set Variable Set SW_Distance[1] = "800.00"
Set Variable Set SW_Distance[2] = "800.00"
Set Variable Set SW_Distance[3] = "800.00"
Trigger - Run Shockwave_Cast <gen> (ignoring conditions)
Carrion Swarm Heal
Events
Conditions
(TempUnit belongs to an ally of (Owner of SW_Caster[SW_Loop]).) Equal to True
Actions
Unit - Set life of TempUnit to ((Life of TempUnit) + 200.00)
Special Effect - Create a special effect attached to the origin (Unexpected type: 'attachpoint') of TempUnit using Abilities\Spells\Undead\VampiricAura\VampiricAuraTarget.mdl
Special Effect - Destroy (Last created special effect)
Incineration Wave
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Incineration Wave (Trigger)
Actions
Set Variable Set SW_Max = (SW_Max + 1)
Set Variable Set SW_Caster[SW_Max] = (Triggering unit)
Set Variable Set SW_Point[0] = (Position of (Triggering unit))
Set Variable Set SW_Point[1] = (Target point of ability being cast)
Set Variable Set SW_Lvl[SW_Max] = (Level of (Ability being cast) for (Triggering unit))
Set Variable Set SW_WaveEffect[SW_Max] = ""
Set Variable Set SW_WaveEffectEnd[SW_Max] = ""
Set Variable Set SW_WaveEffectLoop[SW_Max] = "Abilities\Spells\Other\Incinerate\FireLordDeathExplode.mdl"
Set Variable Set SW_LoopingSfx[SW_Max] = "true"
Set Variable Set SW_ExtraEffectTargetCheck[SW_Max] = "true"
Set Variable Set SW_ExtraEffectTarget[SW_Max] = Incineration_Wave_Extra <gen>
Set Variable Set SW_AffectAlly[SW_Max] = "false"
Set Variable Set SW_AffectEnemy[SW_Max] = "true"
Set Variable Set SW_AffectAir[SW_Max] = "true"
Set Variable Set SW_AffectGround[SW_Max] = "true"
Set Variable Set SW_AffectStructure[SW_Max] = "false"
Set Variable Set SW_OneInstance[SW_Max] = "true"
Set Variable Set SW_AttackType[SW_Max] = Spells
Set Variable Set SW_DamageType[SW_Max] = Magic
Set Variable Set SW_Damage[1] = "50.00"
Set Variable Set SW_Damage[2] = "100.00"
Set Variable Set SW_Damage[3] = "150.00"
Set Variable Set SW_AreaInitial[1] = "100.00"
Set Variable Set SW_AreaInitial[2] = "100.00"
Set Variable Set SW_AreaInitial[3] = "100.00"
Set Variable Set SW_AreaFinal[1] = "100.00"
Set Variable Set SW_AreaFinal[2] = "100.00"
Set Variable Set SW_AreaFinal[3] = "100.00"
Set Variable Set SW_Speed[1] = "1500.00"
Set Variable Set SW_Speed[2] = "1500.00"
Set Variable Set SW_Speed[3] = "1500.00"
Set Variable Set SW_Distance[1] = "900.00"
Set Variable Set SW_Distance[2] = "1350.00"
Set Variable Set SW_Distance[3] = "1800.00"
Trigger - Run Shockwave_Cast <gen> (ignoring conditions)
Incineration Wave Extra
Events
Conditions
Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(Level of Incineration Wave (Stun) for SW_Dummy[SW_Loop]) Equal to 0
Then - Actions
Unit - Add Incineration Wave (Stun) to SW_Dummy[SW_Loop]
Else - Actions
Unit - Set level of Incineration Wave (Stun) for SW_Dummy[SW_Loop] to SW_Lvl[SW_Loop]
Custom script: call IssueTargetOrderById( udg_SW_Dummy[udg_SW_Loop], 852095, udg_TempUnit)
Silence Wave
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Silence Wave (Trigger)
Actions
Set Variable Set SW_Max = (SW_Max + 1)
Set Variable Set SW_Caster[SW_Max] = (Triggering unit)
Set Variable Set SW_Point[0] = (Position of (Triggering unit))
Set Variable Set SW_Point[1] = (Target point of ability being cast)
Set Variable Set SW_Lvl[SW_Max] = (Level of (Ability being cast) for (Triggering unit))
Set Variable Set SW_WaveEffect[SW_Max] = "Abilities\Weapons\FaerieDragonMissile\FaerieDragonMissile.mdl"
Set Variable Set SW_WaveEffectEnd[SW_Max] = ""
Set Variable Set SW_LoopingSfx[SW_Max] = "false"
Set Variable Set SW_ExtraEffectCheck[SW_Max] = "true"
Set Variable Set SW_ExtraEffect[SW_Max] = Silence_Wave_Extra <gen>
Set Variable Set SW_ExtraEffectTargetCheck[SW_Max] = "false"
Set Variable Set SW_AffectAlly[SW_Max] = "true"
Set Variable Set SW_AffectEnemy[SW_Max] = "true"
Set Variable Set SW_AffectAir[SW_Max] = "true"
Set Variable Set SW_AffectGround[SW_Max] = "true"
Set Variable Set SW_AffectStructure[SW_Max] = "false"
Set Variable Set SW_OneInstance[SW_Max] = "true"
Set Variable Set SW_AttackType[SW_Max] = Spells
Set Variable Set SW_DamageType[SW_Max] = Universal
Set Variable Set SW_Attachment = "overhead"
Set Variable Set SW_Damage[1] = "200.00"
Set Variable Set SW_AreaInitial[1] = "100.00"
Set Variable Set SW_AreaFinal[1] = "100.00"
Set Variable Set SW_Speed[1] = "600.00"
Set Variable Set SW_Distance[1] = "800.00"
Trigger - Run Shockwave_Cast <gen> (ignoring conditions)
Silence Wave Extra
Events
Conditions
Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(Level of Silence (effect) for SW_Dummy[SW_Loop]) Equal to 0
Then - Actions
Unit - Add Silence (effect) to SW_Dummy[SW_Loop]
Else - Actions
Unit - Order SW_Dummy[SW_Loop] to Neutral Dark Ranger - Silence . SW_NextPoint[1]
Top