• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

Shock Explosion v1.02.w3x
Variables
Test Map Triggers - Useless
Hero Creation
Creep Spawn
Shock Explosion
EN Import - Credits - Modifications
FR Import - Credits - Modifications
SE Init
Don't Touch after this /// Ne touchez rien après ça
SE Cast
SE Loop
Entrez le code script personnalisé spécifique à la carte ci-dessous. Ce texte sera inclus dans le script de la carte après que les variables auront été déclarées et avant tout code de déclencheur.
Name Type is_array initial_value
SE_AttackType attacktype No
SE_DamageType damagetype No
SE_ExplosionDamages real Yes
SE_ExplosionDamagesAoe real Yes
SE_ExplosionModel string No
SE_Hash hashtable No
SE_Integer integer No
SE_Integer2 integer No
SE_Integer3 integer No
SE_Integer4 integer No
SE_Point location No
SE_Point2 location No
SE_Real real No
SE_Real2 real No
SE_Real3 real No
SE_RockGroup group No
SE_RockHeightDecrement real Yes
SE_RockHeightSpeed real Yes
SE_RocksAngle real Yes
SE_RocksAngleRandom real Yes
SE_RockScaleMax real Yes
SE_RockScaleMin real Yes
SE_RocksDamages real Yes
SE_RocksDamagesAoe real Yes
SE_RocksIntervalAngle real Yes
SE_RocksNumber integer Yes
SE_RockSpeed real Yes
SE_RocksUnitType unitcode No
SE_SandInterval integer Yes
SE_SandModel string No
SE_SandSpeed real Yes
SE_SandUnitType unitcode No
SE_Unit unit No
SE_Unit2 unit No
SE_WaveGroup group No
Hero Creation
Events
Time - Elapsed game time is 1.00 seconds
Conditions
Actions
Player Group - Pick every player in (All players) and do (Actions)
Loop - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
((Picked player) slot status) Equal to Is playing
((Picked player) controller) Equal to User
Then - Actions
Unit - Create 1 . Tauren Chieftain for (Picked player) at ((Picked player) start location) facing Default building facing degrees
Else - Actions
Creep Spawn
Events
Time - Every 1.50 seconds of game time
Conditions
Actions
Unit - Create 1 . Bandit for Neutral Hostile at (Random point in (Playable map area)) facing Default building facing degrees
1. Open World Editor.

2. Go to File (in the toolbar), then in Preferences and in the General tab, mark the compartment " Create unknown variables by pasting data release mechanism".

3. Open the map example supplied by the creator of the model of spell since World Editor.

4. Copy the Units, the Spells, the Effects / Buffs and Triggers bound to the spell one by one.
Tip: for a spell with several triggers, it is possible to put quite triggers in the same category and so to have only the category need to be copied/paste.

5. Open your Map since World Editor.

6. Paste Units/Abilities/Effects/Buffs/Triggers copied previously.

7. Repeat the stages 3, 4 and 5 until have copied / paste everything in the map, then pass in the stage 8.

8. Verify in triggers, if skills and units if ID of the spells / effects / buffs did not change a map in the other one (if the spells / effects / buffs are good). If they changed, then modify to put ID of the spell / effect / buff in your map (choose in the list ^^).

9. Put credits for the creator of the spell : Vladadamm


For modifications of this spell, follow the Comment actions in triggers. All things you need are in DS Init.
1. Ouvrir le World Editor.

2. Aller dans Fichier (dans la barre d'outils), puis dans Préférences et dans l'onglet Général, cocher la case "Créer des variables inconnues en collant des données déclencheur.

3. Ouvrir la carte exemple fournie par le créateur du modèle de sort depuis le World Editor.

4. Copier les Unités, les Compétences, les Effets/Enchantements et les Déclencheurs liés au sort un par un.
Astuce : Pour un sort avec plusieurs déclencheurs, c'est possible de mettre tout les déclencheurs dans une même catégorie et ainsi n'avoir que la catégorie à copier/coller.

5. Ouvrir votre Map depuis le World Editor.

6. Coller les Unités/Compétences/Effets/Enchantement/Déclencheurs copiés précédemment.

7. Répéter les étapes 3, 4 et 5 jusqu'à avoir tout copié/collé dans sa map, puis passer à l'étape 8.

8. Vérifier dans les déclencheurs, les compétences et les unités si les ID des sorts/effets/buffs n'ont pas changés d'une map à l'autre (si les sorts/effets/buffs sont bons). Si elles ont changées, alors modifier les pour mettre l'ID du sort/effet/buff dans votre map (choisir dans la liste ^^).

9. Mettre des crédits pour le créateur du sort : Vladadamm


Pour des modifications du sort, suivez les Commentaires dans les déclencheurs. Toutes les choses dont vous avez besoin sont dans DS Init.
SE Init
Events
Map initialization
Conditions
Actions
-------- Setting the Unit-Type of the Sand Wave's Dummy. --------
-------- Définis le Type-Unité du Dummy de la Vague de Sable. --------
Set Variable Set SE_SandUnitType = "u000"
-------- Setting the Speed of the Sand Wave for each Level. --------
-------- Définis la Vitesse de la Vague de Sable pour chaque Niveau. --------
Set Variable Set SE_SandSpeed[1] = "25.00"
Set Variable Set SE_SandSpeed[2] = "25.00"
Set Variable Set SE_SandSpeed[3] = "25.00"
Set Variable Set SE_SandSpeed[4] = "25.00"
-------- Set the Interval of the Creation of the Sand Effects for each Level. --------
-------- Définis l'Intervalle de Création des Effets de Sable pour chaque Niveau. --------
Set Variable Set SE_SandInterval[1] = "2"
Set Variable Set SE_SandInterval[2] = "2"
Set Variable Set SE_SandInterval[3] = "2"
Set Variable Set SE_SandInterval[4] = "2"
-------- Setting the Model of the Sand Wave special effects. --------
-------- Définis le Modèle des effets spéciaux de la Vague de Sable. --------
Set Variable Set SE_SandModel = "Objects\Spawnmodels\Undead\ImpaleTargetDust\ImpaleTargetDust.mdl"
-------- Setting the Damages dealt by the Explosion for each Level. --------
-------- Définis les Dommages infligés par l'Explosion pour chaque Niveau. --------
Set Variable Set SE_ExplosionDamages[1] = "100.00"
Set Variable Set SE_ExplosionDamages[2] = "150.00"
Set Variable Set SE_ExplosionDamages[3] = "200.00"
Set Variable Set SE_ExplosionDamages[4] = "250.00"
-------- Setting the AOE of the Damages dealt by the Explosion for each Level. --------
-------- Définis l'AOE des Dommages infligés par l'Explosion pour chaque Niveau. --------
Set Variable Set SE_ExplosionDamagesAoe[1] = "300.00"
Set Variable Set SE_ExplosionDamagesAoe[2] = "300.00"
Set Variable Set SE_ExplosionDamagesAoe[3] = "300.00"
Set Variable Set SE_ExplosionDamagesAoe[4] = "300.00"
-------- Setting the Model of the Explosion special effects. --------
-------- Définis le Modèle des effets spéciaux de l'Explosion. --------
Set Variable Set SE_ExplosionModel = "Abilities\Spells\Other\Volcano\VolcanoDeath.mdl"
-------- Setting the Unit-Type of the Rocks Dummys. --------
-------- Définis le Type-Unité des Rochers Dummys. --------
Set Variable Set SE_RocksUnitType = "u001"
-------- Setting the Number of Flying Rocks for each Level. --------
-------- Définis le Nombre de Rochers Volants pour chaque Niveau. --------
Set Variable Set SE_RocksNumber[1] = "9"
Set Variable Set SE_RocksNumber[2] = "12"
Set Variable Set SE_RocksNumber[3] = "15"
Set Variable Set SE_RocksNumber[4] = "18"
-------- Setting the Minimum and Maximum Scale of the Rocks for each Level. (maybe more natural looking). --------
-------- Définis la Taille Minimum et la Taille Maximum des Rochers pour chaque Niveau. (éventuellement, plus naturel) --------
Set Variable Set SE_RockScaleMin[1] = "90.00"
Set Variable Set SE_RockScaleMin[2] = "90.00"
Set Variable Set SE_RockScaleMin[3] = "90.00"
Set Variable Set SE_RockScaleMin[4] = "90.00"
Set Variable Set SE_RockScaleMax[1] = "110.00"
Set Variable Set SE_RockScaleMax[2] = "110.00"
Set Variable Set SE_RockScaleMax[3] = "110.00"
Set Variable Set SE_RockScaleMax[4] = "110.00"
-------- Setting the Total Angle covered by the Rocks. --------
-------- Définis l'Angle Total couvert par les Rocks. --------
-------- Set it to 360 to have a Circle. If you set it to 180, the rocks will be sent only facing the wave. --------
-------- Mettez le à 360 pour avoir un Cercle. Si vous le mettez à 180, les rochers ne seront envoyés que dans le sens de la vague de sable. --------
Set Variable Set SE_RocksAngle[1] = "360.00"
Set Variable Set SE_RocksAngle[2] = "360.00"
Set Variable Set SE_RocksAngle[3] = "360.00"
Set Variable Set SE_RocksAngle[4] = "360.00"
-------- Setting the Angle between each Rocks, depending of the 2 precedents variables. --------
-------- Définis l'Angle entre chaque Rocher, dépendant des 2 variables précédentes. --------
For each (Integer A) from 1 to 4 , do (Actions)
Loop - Actions
Set Variable Set SE_RocksIntervalAngle[(Integer A)] = (SE_RocksAngle[(Integer A)] / (Real(SE_RocksNumber[(Integer A)])))
-------- Setting the Maximum Random Angle's Offset for the Rocks for each Level. --------
-------- Définis le Décalement Maximum Aléatoire de l'Angle d'un Rocher pour chaque Niveau. --------
Set Variable Set SE_RocksAngleRandom[1] = "4.50"
Set Variable Set SE_RocksAngleRandom[2] = "4.50"
Set Variable Set SE_RocksAngleRandom[3] = "4.50"
Set Variable Set SE_RocksAngleRandom[4] = "4.50"
-------- Setting the Speed of the Rocks for each Level. --------
-------- Définis la Vitesse des Rochers pour chaque Niveau. --------
Set Variable Set SE_RockSpeed[1] = "5.00"
Set Variable Set SE_RockSpeed[2] = "5.00"
Set Variable Set SE_RockSpeed[3] = "5.00"
Set Variable Set SE_RockSpeed[4] = "5.00"
-------- Setting the Base Height Speed of the Rocks for each Level. --------
-------- Définis la Vitesse de Base en Hauteur des Rochers pour chaque Niveau. --------
Set Variable Set SE_RockHeightSpeed[1] = "18.00"
Set Variable Set SE_RockHeightSpeed[2] = "18.00"
Set Variable Set SE_RockHeightSpeed[3] = "18.00"
Set Variable Set SE_RockHeightSpeed[4] = "18.00"
-------- Setting the Height Speed Decrement of the Rocks for each Level. --------
-------- Définis la Decrémentation de la Vitesse en Hauteur des Rochers pour chaque Niveau. --------
Set Variable Set SE_RockHeightDecrement[1] = "0.45"
Set Variable Set SE_RockHeightDecrement[2] = "0.45"
Set Variable Set SE_RockHeightDecrement[3] = "0.45"
Set Variable Set SE_RockHeightDecrement[4] = "0.45"
-------- Setting the Damages dealt by the Rocks for each Level. --------
-------- Définis les Dommages infligés par les Rochers pour chaque Niveau. --------
Set Variable Set SE_RocksDamages[1] = "25.00"
Set Variable Set SE_RocksDamages[2] = "50.00"
Set Variable Set SE_RocksDamages[3] = "75.00"
Set Variable Set SE_RocksDamages[4] = "100.00"
-------- Setting the AOE of the Damages dealt by the Rocks for each Level. --------
-------- Définis l'AOE des Dommages infligés par les Rochers pour chaque Niveau. --------
Set Variable Set SE_RocksDamagesAoe[1] = "75.00"
Set Variable Set SE_RocksDamagesAoe[2] = "75.00"
Set Variable Set SE_RocksDamagesAoe[3] = "75.00"
Set Variable Set SE_RocksDamagesAoe[4] = "75.00"
-------- Both of these set the Damages Types of the damages inflicted by the Spell. --------
-------- Les deux suivant définissent les Types de Dommages des dégâts infligés par le Sort. --------
Set Variable Set SE_AttackType = Spells
Set Variable Set SE_DamageType = Magic
-------- Creating Hashtable and storing it in a Variable. --------
-------- Creation de la Hashtable et stockage dans une Variable. --------
Hashtable - Create a hashtable
Set Variable Set SE_Hash = (Last created hashtable)
The SE Init trigger contains all things you need to modify what you want. I used many variable for let you configure easyer all the things you want, also it's not perfect.

Le déclencheur SE Init contient tout ce dont vous avez besoin pour modifier ce que vous voulez. J'ai utilisé beaucop de variables pour vous laisser configurer facilement tout ce que vous voulez, même si ce n'est pas parfait.


You just need to check all the data things after import, as i said in the Import Notice (stage 8). It's the only thing you should modify in these triggers.

Vous avez juste besoin de vérifier toutes les données après importation, comme j'ai dit dans la Notice d'Importation (étape 8). C'est la seule chose que vous devez modifier dans ces déclencheurs.
SE Cast
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to Shock Explosion
Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(SE_Loop <gen> is on) Equal to False
Then - Actions
Trigger - Turn on SE_Loop <gen>
Else - Actions
Set Variable Set SE_Point = (Position of (Triggering unit))
Set Variable Set SE_Point2 = (Target point of ability being cast)
Unit - Create 1 SE_SandUnitType for (Triggering player) at SE_Point facing SE_Point2
Set Variable Set SE_Unit = (Last created unit)
Custom script: set udg_SE_Integer = GetHandleId(udg_SE_Unit)
Unit Group - Add SE_Unit to SE_WaveGroup
Hashtable - Save (Level of Shock Explosion for (Triggering unit)) as 0 of SE_Integer in SE_Hash .
Hashtable - Save Handle Of (Triggering unit) as 1 of SE_Integer in SE_Hash .
Hashtable - Save (Angle from SE_Point to SE_Point2) as 2 of SE_Integer in SE_Hash .
Hashtable - Save (Distance between SE_Point and SE_Point2) as 3 of SE_Integer in SE_Hash .
Hashtable - Save 1 as 4 of SE_Integer in SE_Hash .
Custom script: call RemoveLocation(udg_SE_Point)
Custom script: call RemoveLocation(udg_SE_Point2)
SE Loop
Events
Time - Every 0.03 seconds of game time
Conditions
Actions
Unit Group - Pick every unit in SE_WaveGroup and do (Actions)
Loop - Actions
Set Variable Set SE_Unit = (Picked unit)
Custom script: set udg_SE_Integer = GetHandleId(udg_SE_Unit)
Set Variable Set SE_Integer2 = (Load 0 of SE_Integer from SE_Hash.)
Set Variable Set SE_Integer3 = (Load 4 of SE_Integer from SE_Hash.)
Set Variable Set SE_Real = ((Load 3 of SE_Integer from SE_Hash.) - SE_SandSpeed[SE_Integer2])
Set Variable Set SE_Real2 = (Load 2 of SE_Integer from SE_Hash.)
Set Variable Set SE_Point = (Position of SE_Unit)
Set Variable Set SE_Point2 = (SE_Point offset by SE_SandSpeed[SE_Integer2] towards SE_Real2 degrees.)
Unit - Move SE_Unit instantly to SE_Point2
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
SE_Integer3 Equal to SE_SandInterval[SE_Integer2]
Then - Actions
Special Effect - Create a special effect at SE_Point2 using SE_SandModel
Special Effect - Destroy (Last created special effect)
Hashtable - Save 1 as 4 of SE_Integer in SE_Hash .
Else - Actions
Hashtable - Save (SE_Integer3 + 1) as 4 of SE_Integer in SE_Hash .
Hashtable - Save SE_Real as 3 of SE_Integer in SE_Hash .
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
SE_Real Less than or equal to SE_SandSpeed[SE_Integer2]
Then - Actions
Unit - Set level of Stun Explosion for SE_Unit to SE_Integer2
Unit - Order SE_Unit to Orc Tauren Chieftain - War Stomp .
Unit - Add a 1.00 second Generic expiration timer to SE_Unit
Unit Group - Remove SE_Unit from SE_WaveGroup .
Special Effect - Create a special effect at SE_Point2 using SE_ExplosionModel
Special Effect - Destroy (Last created special effect)
Custom script: set bj_wantDestroyGroup = true
Unit Group - Pick every unit in (Units within SE_ExplosionDamagesAoe[SE_Integer2] of SE_Point2 matching (((Matching unit) belongs to an enemy of (Owner of SE_Unit).) Equal to True).) and do (Actions)
Loop - Actions
Unit - Cause (Load 1 of SE_Integer in SE_Hash.) to damage (Picked unit) , dealing SE_ExplosionDamages[SE_Integer2] damage of attack type SE_AttackType and damage type SE_DamageType
For each (Integer SE_Integer3 ) from 0 to (SE_RocksNumber[SE_Integer2] - 1) , do (Actions)
Loop - Actions
Set Variable Set SE_Real = (((SE_RocksIntervalAngle[SE_Integer2] x (Real(SE_Integer3))) - (SE_RocksAngle[SE_Integer2] / 2.00)) + (SE_Real2 + (Random real number between (0.00 - SE_RocksAngleRandom[SE_Integer2]) and SE_RocksAngleRandom[SE_Integer2])))
Unit - Create 1 . SE_RocksUnitType for (Owner of SE_Unit) at SE_Point2 facing SE_Real degrees
Set Variable Set SE_Unit2 = (Last created unit)
Custom script: set udg_SE_Integer4 = GetHandleId(udg_SE_Unit2)
Set Variable Set SE_Real3 = (Random real number between SE_RockScaleMin[SE_Integer2] and SE_RockScaleMax[SE_Integer2])
Unit Group - Add SE_Unit2 to SE_RockGroup
Animation - Change SE_Unit2 's size to ( SE_Real3 %, SE_Real3 %, SE_Real3 %) of its original size
Animation - Change SE_Unit2 flying height to SE_RockHeightSpeed[SE_Integer2] at 0.00
Hashtable - Save SE_Integer2 as 0 of SE_Integer4 in SE_Hash .
Hashtable - Save Handle Of (Load 1 of SE_Integer in SE_Hash.) as 1 of SE_Integer4 in SE_Hash .
Hashtable - Save SE_Real as 2 of SE_Integer4 in SE_Hash .
Hashtable - Save SE_RockHeightSpeed[SE_Integer2] as 3 of SE_Integer4 in SE_Hash .
Custom script: call FlushChildHashtable(udg_SE_Hash, udg_SE_Integer)
Else - Actions
Custom script: call RemoveLocation(udg_SE_Point)
Custom script: call RemoveLocation(udg_SE_Point2)
Unit Group - Pick every unit in SE_RockGroup and do (Actions)
Loop - Actions
Set Variable Set SE_Unit = (Picked unit)
Custom script: set udg_SE_Integer = GetHandleId(udg_SE_Unit)
Set Variable Set SE_Integer2 = (Load 0 of SE_Integer from SE_Hash.)
Set Variable Set SE_Real = ((Load 3 of SE_Integer from SE_Hash.) - SE_RockHeightDecrement[SE_Integer2])
Set Variable Set SE_Real2 = (Load 2 of SE_Integer from SE_Hash.)
Set Variable Set SE_Point = (Position of SE_Unit)
Set Variable Set SE_Point2 = (SE_Point offset by SE_RockSpeed[SE_Integer2] towards SE_Real2 degrees.)
Unit - Move SE_Unit instantly to SE_Point2
Animation - Change SE_Unit flying height to ((Current flying height of SE_Unit) + SE_Real) at 0.00
Hashtable - Save SE_Real as 3 of SE_Integer in SE_Hash .
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(Current flying height of SE_Unit) Less than SE_RockHeightSpeed[SE_Integer2]
Then - Actions
Unit - Set level of Stun Rocks for SE_Unit to SE_Integer2
Unit - Order SE_Unit to Orc Tauren Chieftain - War Stomp .
Unit - Add a 0.01 second Generic expiration timer to SE_Unit
Unit Group - Remove SE_Unit from SE_RockGroup .
Custom script: set bj_wantDestroyGroup = true
Unit Group - Pick every unit in (Units within SE_RocksDamagesAoe[SE_Integer2] of SE_Point2 matching (((Matching unit) belongs to an enemy of (Owner of SE_Unit).) Equal to True).) and do (Actions)
Loop - Actions
Unit - Cause (Load 1 of SE_Integer in SE_Hash.) to damage (Picked unit) , dealing SE_RocksDamages[SE_Integer2] damage of attack type SE_AttackType and damage type SE_DamageType
Custom script: call FlushChildHashtable(udg_SE_Hash, udg_SE_Integer)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(SE_WaveGroup is empty) Equal to True
(SE_RockGroup is empty) Equal to True
Then - Actions
Trigger - Turn off SE_Loop <gen>
Else - Actions
Else - Actions
Custom script: call RemoveLocation(udg_SE_Point)
Custom script: call RemoveLocation(udg_SE_Point2)
Top