How to import Sargeras_V2

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Sargeras_V2 of the bundle Sargeras_V2. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Sargeras (Sponsored by Roman from China).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Sargeras_v2.mdx

Now Click the "Import File" Button:

Next select 'Sargeras_v2.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file Sargeras_v2.mdx.

Importing sargeras_beard_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_beard_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_beard_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_beard_diffuse.dds.

Importing sargeras_beard_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_beard_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_beard_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_beard_emissive.dds.

Importing sargeras_belt_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_belt_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_belt_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_belt_diffuse.dds.

Importing sargeras_belt_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_belt_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_belt_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_belt_emissive.dds.

Importing sargeras_boarder_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_boarder_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_boarder_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_boarder_diffuse.dds.

Importing sargeras_crown_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_crown_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_crown_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_crown_diffuse.dds.

Importing sargeras_goatbone_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_goatbone_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_goatbone_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_goatbone_diffuse.dds.

Importing sargeras_goatbone_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_goatbone_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_goatbone_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_goatbone_emissive.dds.

Importing sargeras_hair_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_hair_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_hair_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_hair_diffuse.dds.

Importing sargeras_handle2_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_handle2_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_handle2_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_handle2_diffuse.dds.

Importing sargeras_handle2_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_handle2_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_handle2_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_handle2_emissive.dds.

Importing sargeras_handle3_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_handle3_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_handle3_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_handle3_diffuse.dds.

Importing sargeras_handle_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_handle_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_handle_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_handle_diffuse.dds.

Importing sargeras_horn_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_horn_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_horn_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_horn_diffuse.dds.

Importing sargeras_horn_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_horn_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_horn_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_horn_emissive.dds.

Importing sargeras_leg_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_leg_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_leg_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_leg_emissive.dds.

Importing sargeras_loincloth_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_loincloth_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_loincloth_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_loincloth_diffuse.dds.

Importing sargeras_loincloth_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_loincloth_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_loincloth_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_loincloth_emissive.dds.

Importing sargeras_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_main_diffuse.dds.

Importing sargeras_main_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_main_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_main_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_main_emissive.dds.

Importing sargeras_pauldron_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_pauldron_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_pauldron_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_pauldron_diffuse.dds.

Importing sargeras_pauldron_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_pauldron_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_pauldron_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_pauldron_emissive.dds.

Importing sargeras_portal2_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_portal2_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_portal2_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_portal2_diffuse.dds.

Importing sargeras_portal2_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_portal2_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_portal2_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_portal2_emissive.dds.

Importing sargeras_portal_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_portal_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_portal_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_portal_diffuse.dds.

Importing sargeras_portal_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_portal_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_portal_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_portal_emissive.dds.

Importing sargeras_skirt_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_skirt_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_skirt_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_skirt_diffuse.dds.

Importing sargeras_skirt_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_skirt_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_skirt_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_skirt_emissive.dds.

Importing sargeras_skulleye_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_skulleye_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_skulleye_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_skulleye_emissive.dds.

Importing sargeras_weapon_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_weapon_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_weapon_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_weapon_diffuse.dds.

Importing sargeras_weapon_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_weapon_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_weapon_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_weapon_emissive.dds.

Importing sargeras_wing_diffuse.dds

Now Click the "Import File" Button:

Next select 'sargeras_wing_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_wing_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_wing_diffuse.dds.

Importing sargeras_wing_emissive.dds

Now Click the "Import File" Button:

Next select 'sargeras_wing_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_wing_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_wing_emissive.dds.

Importing sargeras_wing_orm.dds

Now Click the "Import File" Button:

Next select 'sargeras_wing_orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file sargeras_wing_orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file sargeras_wing_orm.dds.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.