• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

How to import Rend Blackhand by Aeonux

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Rend Blackhand by Aeonux of the bundle Rend Blackhand by Aeonux. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Rend Blackhand by Aeonux.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Rend Blackhand by Aeonux
Rend_by_Aeonux.mdx
Rend_Armor.blp
Rend_Armor2.blp
Rend_Body.blp
Rend_Hair.blp
Rend_Shoulder.blp
Rend_Sword.blp

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Rend_by_Aeonux.mdx

Now Click the "Import File" Button:

Next select 'Rend_by_Aeonux.mdx' in the folder which you extracted from the zip archive:

Rend Blackhand by Aeonux
Rend_by_Aeonux.mdx
Rend_Armor.blp
Rend_Armor2.blp
Rend_Body.blp
Rend_Hair.blp
Rend_Shoulder.blp
Rend_Sword.blp

The file has been properly added to the map archive:

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx

Done, you have imported the file Rend_by_Aeonux.mdx.

Importing Rend_Armor.blp

Now Click the "Import File" Button:

Next select 'Rend_Armor.blp' in the folder which you extracted from the zip archive:

Rend Blackhand by Aeonux
Rend_by_Aeonux.mdx
Rend_Armor.blp
Rend_Armor2.blp
Rend_Body.blp
Rend_Hair.blp
Rend_Shoulder.blp
Rend_Sword.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
war3mapimported/Rend_Armor.blp

Double-click the file Rend_Armor.blp:

Rend_Armor.blp
Image / Texture
208
war3mapimported/Rend_Armor.blp

Tick the box "Use Custom Path" and type in the correct path:

Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp

The file has been properly added to the map archive:

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp

Done, you have imported the file Rend_Armor.blp.

Importing Rend_Armor2.blp

Now Click the "Import File" Button:

Next select 'Rend_Armor2.blp' in the folder which you extracted from the zip archive:

Rend Blackhand by Aeonux
Rend_by_Aeonux.mdx
Rend_Armor.blp
Rend_Armor2.blp
Rend_Body.blp
Rend_Hair.blp
Rend_Shoulder.blp
Rend_Sword.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
war3mapimported/Rend_Armor2.blp

Double-click the file Rend_Armor2.blp:

Rend_Armor2.blp
Image / Texture
291
war3mapimported/Rend_Armor2.blp

Tick the box "Use Custom Path" and type in the correct path:

Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp

The file has been properly added to the map archive:

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp

Done, you have imported the file Rend_Armor2.blp.

Importing Rend_Body.blp

Now Click the "Import File" Button:

Next select 'Rend_Body.blp' in the folder which you extracted from the zip archive:

Rend Blackhand by Aeonux
Rend_by_Aeonux.mdx
Rend_Armor.blp
Rend_Armor2.blp
Rend_Body.blp
Rend_Hair.blp
Rend_Shoulder.blp
Rend_Sword.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp
Rend_Body.blp
Image / Texture
1,171
war3mapimported/Rend_Body.blp

Double-click the file Rend_Body.blp:

Rend_Body.blp
Image / Texture
1,171
war3mapimported/Rend_Body.blp

Tick the box "Use Custom Path" and type in the correct path:

Rend_Body.blp
Image / Texture
1,171
Rend_Body.blp

The file has been properly added to the map archive:

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp
Rend_Body.blp
Image / Texture
1,171
Rend_Body.blp

Done, you have imported the file Rend_Body.blp.

Importing Rend_Hair.blp

Now Click the "Import File" Button:

Next select 'Rend_Hair.blp' in the folder which you extracted from the zip archive:

Rend Blackhand by Aeonux
Rend_by_Aeonux.mdx
Rend_Armor.blp
Rend_Armor2.blp
Rend_Body.blp
Rend_Hair.blp
Rend_Shoulder.blp
Rend_Sword.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp
Rend_Body.blp
Image / Texture
1,171
Rend_Body.blp
Rend_Hair.blp
Image / Texture
765
war3mapimported/Rend_Hair.blp

Double-click the file Rend_Hair.blp:

Rend_Hair.blp
Image / Texture
765
war3mapimported/Rend_Hair.blp

Tick the box "Use Custom Path" and type in the correct path:

Rend_Hair.blp
Image / Texture
765
Rend_Hair.blp

The file has been properly added to the map archive:

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp
Rend_Body.blp
Image / Texture
1,171
Rend_Body.blp
Rend_Hair.blp
Image / Texture
765
Rend_Hair.blp

Done, you have imported the file Rend_Hair.blp.

Importing Rend_Shoulder.blp

Now Click the "Import File" Button:

Next select 'Rend_Shoulder.blp' in the folder which you extracted from the zip archive:

Rend Blackhand by Aeonux
Rend_by_Aeonux.mdx
Rend_Armor.blp
Rend_Armor2.blp
Rend_Body.blp
Rend_Hair.blp
Rend_Shoulder.blp
Rend_Sword.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp
Rend_Body.blp
Image / Texture
1,171
Rend_Body.blp
Rend_Hair.blp
Image / Texture
765
Rend_Hair.blp
Rend_Shoulder.blp
Image / Texture
172
war3mapimported/Rend_Shoulder.blp

Double-click the file Rend_Shoulder.blp:

Rend_Shoulder.blp
Image / Texture
172
war3mapimported/Rend_Shoulder.blp

Tick the box "Use Custom Path" and type in the correct path:

Rend_Shoulder.blp
Image / Texture
172
Rend_Shoulder.blp

The file has been properly added to the map archive:

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp
Rend_Body.blp
Image / Texture
1,171
Rend_Body.blp
Rend_Hair.blp
Image / Texture
765
Rend_Hair.blp
Rend_Shoulder.blp
Image / Texture
172
Rend_Shoulder.blp

Done, you have imported the file Rend_Shoulder.blp.

Importing Rend_Sword.blp

Now Click the "Import File" Button:

Next select 'Rend_Sword.blp' in the folder which you extracted from the zip archive:

Rend Blackhand by Aeonux
Rend_by_Aeonux.mdx
Rend_Armor.blp
Rend_Armor2.blp
Rend_Body.blp
Rend_Hair.blp
Rend_Shoulder.blp
Rend_Sword.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp
Rend_Body.blp
Image / Texture
1,171
Rend_Body.blp
Rend_Hair.blp
Image / Texture
765
Rend_Hair.blp
Rend_Shoulder.blp
Image / Texture
172
Rend_Shoulder.blp
Rend_Sword.blp
Image / Texture
314
war3mapimported/Rend_Sword.blp

Double-click the file Rend_Sword.blp:

Rend_Sword.blp
Image / Texture
314
war3mapimported/Rend_Sword.blp

Tick the box "Use Custom Path" and type in the correct path:

Rend_Sword.blp
Image / Texture
314
Rend_Sword.blp

The file has been properly added to the map archive:

Rend_by_Aeonux.mdx
Model
1,657
war3mapimported/Rend_by_Aeonux.mdx
Rend_Armor.blp
Image / Texture
208
Rend_Armor.blp
Rend_Armor2.blp
Image / Texture
291
Rend_Armor2.blp
Rend_Body.blp
Image / Texture
1,171
Rend_Body.blp
Rend_Hair.blp
Image / Texture
765
Rend_Hair.blp
Rend_Shoulder.blp
Image / Texture
172
Rend_Shoulder.blp
Rend_Sword.blp
Image / Texture
314
Rend_Sword.blp

Done, you have imported the file Rend_Sword.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

  • Link to the model and the tutorial
  • Precise description of what does not work
  • The map you tried to import it to (with the model imported)
And we will do what we can to help you.
Top