• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

How to import Reaver_Portrait

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Reaver_Portrait of the bundle Reaver_Portrait. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Protoss Unit Pack (Starcraft 2).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Reaver_Portrait
Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
zealot_background_diff.blp
smx2_reaverportrait_emis.blp

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Reaver_Portrait.mdx

Now Click the "Import File" Button:

Next select 'Reaver_Portrait.mdx' in the folder which you extracted from the zip archive:

Reaver_Portrait
Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
smx2_reaverportrait_emis.blp
zealot_background_diff.blp

The file has been properly added to the map archive:

Reaver_Portrait.mdx
Model
119
war3mapimported/Reaver_Portrait.mdx

Done, you have imported the file Reaver_Portrait.mdx.

Importing smx2_reaverportrait_diff.blp

Now Click the "Import File" Button:

Next select 'smx2_reaverportrait_diff.blp' in the folder which you extracted from the zip archive:

Reaver_Portrait
Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
smx2_reaverportrait_emis.blp
zealot_background_diff.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Reaver_Portrait.mdx
Model
119
war3mapimported/Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
Image / Texture
805
war3mapimported/smx2_reaverportrait_diff.blp

Double-click the file smx2_reaverportrait_diff.blp:

smx2_reaverportrait_diff.blp
Image / Texture
805
war3mapimported/smx2_reaverportrait_diff.blp

Tick the box "Use Custom Path" and type in the correct path:

smx2_reaverportrait_diff.blp
Image / Texture
805
smx2_reaverportrait_diff.blp

The file has been properly added to the map archive:

Reaver_Portrait.mdx
Model
119
war3mapimported/Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
Image / Texture
805
smx2_reaverportrait_diff.blp

Done, you have imported the file smx2_reaverportrait_diff.blp.

Importing smx2_reaverportrait_emis.blp

Now Click the "Import File" Button:

Next select 'smx2_reaverportrait_emis.blp' in the folder which you extracted from the zip archive:

Reaver_Portrait
Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
smx2_reaverportrait_emis.blp
zealot_background_diff.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Reaver_Portrait.mdx
Model
119
war3mapimported/Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
Image / Texture
805
smx2_reaverportrait_diff.blp
smx2_reaverportrait_emis.blp
Image / Texture
120
war3mapimported/smx2_reaverportrait_emis.blp

Double-click the file smx2_reaverportrait_emis.blp:

smx2_reaverportrait_emis.blp
Image / Texture
120
war3mapimported/smx2_reaverportrait_emis.blp

Tick the box "Use Custom Path" and type in the correct path:

smx2_reaverportrait_emis.blp
Image / Texture
120
smx2_reaverportrait_emis.blp

The file has been properly added to the map archive:

Reaver_Portrait.mdx
Model
119
war3mapimported/Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
Image / Texture
805
smx2_reaverportrait_diff.blp
smx2_reaverportrait_emis.blp
Image / Texture
120
smx2_reaverportrait_emis.blp

Done, you have imported the file smx2_reaverportrait_emis.blp.

Importing zealot_background_diff.blp

Now Click the "Import File" Button:

Next select 'zealot_background_diff.blp' in the folder which you extracted from the zip archive:

Reaver_Portrait
Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
smx2_reaverportrait_emis.blp
zealot_background_diff.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Reaver_Portrait.mdx
Model
119
war3mapimported/Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
Image / Texture
805
smx2_reaverportrait_diff.blp
smx2_reaverportrait_emis.blp
Image / Texture
120
smx2_reaverportrait_emis.blp
zealot_background_diff.blp
Image / Texture
115
war3mapimported/zealot_background_diff.blp

Double-click the file zealot_background_diff.blp:

zealot_background_diff.blp
Image / Texture
115
war3mapimported/zealot_background_diff.blp

Tick the box "Use Custom Path" and type in the correct path:

zealot_background_diff.blp
Image / Texture
115
zealot_background_diff.blp

The file has been properly added to the map archive:

Reaver_Portrait.mdx
Model
119
war3mapimported/Reaver_Portrait.mdx
smx2_reaverportrait_diff.blp
Image / Texture
805
smx2_reaverportrait_diff.blp
smx2_reaverportrait_emis.blp
Image / Texture
120
smx2_reaverportrait_emis.blp
zealot_background_diff.blp
Image / Texture
115
zealot_background_diff.blp

Done, you have imported the file zealot_background_diff.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

  • Link to the model and the tutorial
  • Precise description of what does not work
  • The map you tried to import it to (with the model imported)
And we will do what we can to help you.
Top