• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

How to import Probe_Portrait

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Probe_Portrait of the bundle Probe_Portrait. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Protoss Unit Pack (Starcraft 2).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Probe_Portrait
Probe_Portrait.mdx
warpline2long.blp
protoss_backdrop1.blp
probe_diff2.blp
probe_emiss2.blp

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Probe_Portrait.mdx

Now Click the "Import File" Button:

Next select 'Probe_Portrait.mdx' in the folder which you extracted from the zip archive:

Probe_Portrait
Probe_Portrait.mdx
probe_diff2.blp
probe_emiss2.blp
protoss_backdrop1.blp
warpline2long.blp

The file has been properly added to the map archive:

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx

Done, you have imported the file Probe_Portrait.mdx.

Importing probe_diff2.blp

Now Click the "Import File" Button:

Next select 'probe_diff2.blp' in the folder which you extracted from the zip archive:

Probe_Portrait
Probe_Portrait.mdx
probe_diff2.blp
probe_emiss2.blp
protoss_backdrop1.blp
warpline2long.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx
probe_diff2.blp
Image / Texture
935
war3mapimported/probe_diff2.blp

Double-click the file probe_diff2.blp:

probe_diff2.blp
Image / Texture
935
war3mapimported/probe_diff2.blp

Tick the box "Use Custom Path" and type in the correct path:

probe_diff2.blp
Image / Texture
935
probe_diff2.blp

The file has been properly added to the map archive:

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx
probe_diff2.blp
Image / Texture
935
probe_diff2.blp

Done, you have imported the file probe_diff2.blp.

Importing probe_emiss2.blp

Now Click the "Import File" Button:

Next select 'probe_emiss2.blp' in the folder which you extracted from the zip archive:

Probe_Portrait
Probe_Portrait.mdx
probe_diff2.blp
probe_emiss2.blp
protoss_backdrop1.blp
warpline2long.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx
probe_diff2.blp
Image / Texture
935
probe_diff2.blp
probe_emiss2.blp
Image / Texture
220
war3mapimported/probe_emiss2.blp

Double-click the file probe_emiss2.blp:

probe_emiss2.blp
Image / Texture
220
war3mapimported/probe_emiss2.blp

Tick the box "Use Custom Path" and type in the correct path:

probe_emiss2.blp
Image / Texture
220
probe_emiss2.blp

The file has been properly added to the map archive:

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx
probe_diff2.blp
Image / Texture
935
probe_diff2.blp
probe_emiss2.blp
Image / Texture
220
probe_emiss2.blp

Done, you have imported the file probe_emiss2.blp.

Importing protoss_backdrop1.blp

Now Click the "Import File" Button:

Next select 'protoss_backdrop1.blp' in the folder which you extracted from the zip archive:

Probe_Portrait
Probe_Portrait.mdx
probe_diff2.blp
probe_emiss2.blp
protoss_backdrop1.blp
warpline2long.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx
probe_diff2.blp
Image / Texture
935
probe_diff2.blp
probe_emiss2.blp
Image / Texture
220
probe_emiss2.blp
protoss_backdrop1.blp
Image / Texture
175
war3mapimported/protoss_backdrop1.blp

Double-click the file protoss_backdrop1.blp:

protoss_backdrop1.blp
Image / Texture
175
war3mapimported/protoss_backdrop1.blp

Tick the box "Use Custom Path" and type in the correct path:

protoss_backdrop1.blp
Image / Texture
175
protoss_backdrop1.blp

The file has been properly added to the map archive:

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx
probe_diff2.blp
Image / Texture
935
probe_diff2.blp
probe_emiss2.blp
Image / Texture
220
probe_emiss2.blp
protoss_backdrop1.blp
Image / Texture
175
protoss_backdrop1.blp

Done, you have imported the file protoss_backdrop1.blp.

Importing warpline2long.blp

Now Click the "Import File" Button:

Next select 'warpline2long.blp' in the folder which you extracted from the zip archive:

Probe_Portrait
Probe_Portrait.mdx
probe_diff2.blp
probe_emiss2.blp
protoss_backdrop1.blp
warpline2long.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx
probe_diff2.blp
Image / Texture
935
probe_diff2.blp
probe_emiss2.blp
Image / Texture
220
probe_emiss2.blp
protoss_backdrop1.blp
Image / Texture
175
protoss_backdrop1.blp
warpline2long.blp
Image / Texture
6
war3mapimported/warpline2long.blp

Double-click the file warpline2long.blp:

warpline2long.blp
Image / Texture
6
war3mapimported/warpline2long.blp

Tick the box "Use Custom Path" and type in the correct path:

warpline2long.blp
Image / Texture
6
warpline2long.blp

The file has been properly added to the map archive:

Probe_Portrait.mdx
Model
205
war3mapimported/Probe_Portrait.mdx
probe_diff2.blp
Image / Texture
935
probe_diff2.blp
probe_emiss2.blp
Image / Texture
220
probe_emiss2.blp
protoss_backdrop1.blp
Image / Texture
175
protoss_backdrop1.blp
warpline2long.blp
Image / Texture
6
warpline2long.blp

Done, you have imported the file warpline2long.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

  • Link to the model and the tutorial
  • Precise description of what does not work
  • The map you tried to import it to (with the model imported)
And we will do what we can to help you.
Top