How to import Naxxramas [All 4 Quarters] (Entire Raid Interior)

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Naxxramas [All 4 Quarters] (Entire Raid Interior) of the bundle Naxxramas [All 4 Quarters] (Entire Raid Interior). Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Naxxramas All 4 Quarters (Entire Raid Interior).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing stratholme_raid.mdx

Now Click the "Import File" Button:

Next select 'stratholme_raid.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file stratholme_raid.mdx.

Importing 07_dirt01.blp

Now Click the "Import File" Button:

Next select '07_dirt01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 07_dirt01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 07_dirt01.blp.

Importing bm_brspire_steamvent01.blp

Now Click the "Import File" Button:

Next select 'bm_brspire_steamvent01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_brspire_steamvent01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_brspire_steamvent01.blp.

Importing bm_kzn_inttrims04.blp

Now Click the "Import File" Button:

Next select 'bm_kzn_inttrims04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_kzn_inttrims04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_kzn_inttrims04.blp.

Importing bm_strat_bonepile01.blp

Now Click the "Import File" Button:

Next select 'bm_strat_bonepile01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_strat_bonepile01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_strat_bonepile01.blp.

Importing bm_strat_dirtground01.blp

Now Click the "Import File" Button:

Next select 'bm_strat_dirtground01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file bm_strat_dirtground01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file bm_strat_dirtground01.blp.

Importing gray08.blp

Now Click the "Import File" Button:

Next select 'gray08.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file gray08.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file gray08.blp.

Importing jac_stratdoor01.blp

Now Click the "Import File" Button:

Next select 'jac_stratdoor01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jac_stratdoor01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jac_stratdoor01.blp.

Importing jc_strath_furnace.blp

Now Click the "Import File" Button:

Next select 'jc_strath_furnace.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jc_strath_furnace.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jc_strath_furnace.blp.

Importing jc_strath_furnace02.blp

Now Click the "Import File" Button:

Next select 'jc_strath_furnace02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jc_strath_furnace02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jc_strath_furnace02.blp.

Importing jlo_udercity_brickwall.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_brickwall.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_brickwall.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_brickwall.blp.

Importing jlo_udercity_container.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_container.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_container.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_container.blp.

Importing jlo_udercity_curtain_lab.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_curtain_lab.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_curtain_lab.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_curtain_lab.blp.

Importing jlo_udercity_curtain_rogue.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_curtain_rogue.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_curtain_rogue.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_curtain_rogue.blp.

Importing jlo_udercity_curtain_trim.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_curtain_trim.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_curtain_trim.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_curtain_trim.blp.

Importing jlo_udercity_curtains.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_curtains.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_curtains.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_curtains.blp.

Importing jlo_udercity_curtains_warrior.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_curtains_warrior.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_curtains_warrior.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_curtains_warrior.blp.

Importing jlo_udercity_design_trim.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_design_trim.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_design_trim.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_design_trim.blp.

Importing jlo_udercity_floor.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_floor.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_floor.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_floor.blp.

Importing jlo_udercity_flr_design.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_flr_design.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_flr_design.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_flr_design.blp.

Importing jlo_udercity_ground_01.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_ground_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_ground_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_ground_01.blp.

Importing jlo_udercity_ground_transi.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_ground_transi.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_ground_transi.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_ground_transi.blp.

Importing jlo_udercity_rock.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_rock.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_rock.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_rock.blp.

Importing jlo_udercity_rock_transi.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_rock_transi.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_rock_transi.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_rock_transi.blp.

Importing jlo_udercity_rockwall_01.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_rockwall_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_rockwall_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_rockwall_01.blp.

Importing jlo_udercity_skull.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_skull.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_skull.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_skull.blp.

Importing jlo_udercity_skulldoor.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_skulldoor.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_skulldoor.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_skulldoor.blp.

Importing jlo_udercity_slime.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_slime.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_slime.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_slime.blp.

Importing jlo_udercity_solid_floor.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_solid_floor.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_solid_floor.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_solid_floor.blp.

Importing jlo_udercity_solidwall.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_solidwall.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_solidwall.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_solidwall.blp.

Importing jlo_udercity_solidwall02.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_solidwall02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_solidwall02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_solidwall02.blp.

Importing jlo_udercity_solidwall03.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_solidwall03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_solidwall03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_solidwall03.blp.

Importing jlo_udercity_stonewall01.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_stonewall01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_stonewall01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_stonewall01.blp.

Importing jlo_udercity_trim03.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_trim03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_trim03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_trim03.blp.

Importing jlo_udercity_trim_01.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_trim_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_trim_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_trim_01.blp.

Importing jlo_udercity_trim_02.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_trim_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_trim_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_trim_02.blp.

Importing jlo_udercity_trim_04.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_trim_04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_trim_04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_trim_04.blp.

Importing jlo_udercity_trim_05.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_trim_05.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_trim_05.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_trim_05.blp.

Importing jlo_udercity_trim_06.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_trim_06.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_trim_06.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_trim_06.blp.

Importing jlo_udercity_trim_07.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_trim_07.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_trim_07.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_trim_07.blp.

Importing jlo_udercity_walldesign.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_walldesign.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_walldesign.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_walldesign.blp.

Importing jlo_udercity_walltrim.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_walltrim.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_walltrim.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_walltrim.blp.

Importing jlo_udercity_woodtrim.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_woodtrim.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_woodtrim.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_woodtrim.blp.

Importing jlo_udercity_wormtrim.blp

Now Click the "Import File" Button:

Next select 'jlo_udercity_wormtrim.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_udercity_wormtrim.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_udercity_wormtrim.blp.

Importing jlo_uderctiy_circle_floor.blp

Now Click the "Import File" Button:

Next select 'jlo_uderctiy_circle_floor.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_uderctiy_circle_floor.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_uderctiy_circle_floor.blp.

Importing jlo_undeadzigg_chain.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_chain.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_chain.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_chain.blp.

Importing jlo_undeadzigg_floor2.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_floor2.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_floor2.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_floor2.blp.

Importing jlo_undeadzigg_slimefloor.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_slimefloor.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_slimefloor.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_slimefloor.blp.

Importing jlo_undeadzigg_trim02.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim02.blp.

Importing jlo_undeadzigg_trim03.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim03.blp.

Importing jlo_undeadzigg_trim04.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim04.blp.

Importing jlo_undeadzigg_trim05.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim05.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim05.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim05.blp.

Importing jlo_undeadzigg_trim06.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim06.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim06.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim06.blp.

Importing jlo_undeadzigg_trim07.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim07.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim07.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim07.blp.

Importing jlo_undeadzigg_trim08.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim08.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim08.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim08.blp.

Importing jlo_undeadzigg_trim_128.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_trim_128.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_trim_128.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_trim_128.blp.

Importing jlo_undeadzigg_wall01.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_wall01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_wall01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_wall01.blp.

Importing jlo_undeadzigg_wall02.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_wall02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_wall02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_wall02.blp.

Importing jlo_undeadzigg_walltrans01.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_walltrans01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_walltrans01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_walltrans01.blp.

Importing jlo_undeadzigg_web128.blp

Now Click the "Import File" Button:

Next select 'jlo_undeadzigg_web128.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undeadzigg_web128.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undeadzigg_web128.blp.

Importing jlo_undercity_grate.blp

Now Click the "Import File" Button:

Next select 'jlo_undercity_grate.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undercity_grate.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undercity_grate.blp.

Importing jlo_undercity_pipes01.blp

Now Click the "Import File" Button:

Next select 'jlo_undercity_pipes01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file jlo_undercity_pipes01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file jlo_undercity_pipes01.blp.

Importing rg_jlo_udercity_walltrim_dome.blp

Now Click the "Import File" Button:

Next select 'rg_jlo_udercity_walltrim_dome.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file rg_jlo_udercity_walltrim_dome.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file rg_jlo_udercity_walltrim_dome.blp.

Importing rg_jlo_undeadzigg_floor2.blp

Now Click the "Import File" Button:

Next select 'rg_jlo_undeadzigg_floor2.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file rg_jlo_undeadzigg_floor2.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file rg_jlo_undeadzigg_floor2.blp.

Importing rg_nox_trim.blp

Now Click the "Import File" Button:

Next select 'rg_nox_trim.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file rg_nox_trim.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file rg_nox_trim.blp.

Importing rg_noxi_panel_skulls.blp

Now Click the "Import File" Button:

Next select 'rg_noxi_panel_skulls.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file rg_noxi_panel_skulls.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file rg_noxi_panel_skulls.blp.

Importing rg_noxi_panel_skulls_top.blp

Now Click the "Import File" Button:

Next select 'rg_noxi_panel_skulls_top.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file rg_noxi_panel_skulls_top.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file rg_noxi_panel_skulls_top.blp.

Importing rg_noxi_portal_sides.blp

Now Click the "Import File" Button:

Next select 'rg_noxi_portal_sides.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file rg_noxi_portal_sides.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file rg_noxi_portal_sides.blp.

Importing ts_gate2_textcopy1.blp

Now Click the "Import File" Button:

Next select 'ts_gate2_textcopy1.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ts_gate2_textcopy1.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ts_gate2_textcopy1.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.