• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

MeteorStrike.w3x
Variables
MeteorStrike
MeteorSConfig
MeteorSCast
MeteorSIndex
MeteorSImpact
MeteorSFilter
Variables
Config
TimedSpecialEffect
TSEConfig
TSERegister
TSELoop
TSEEmptyEvent
TSESampleRegisterUnit
TSESampleRegisterPoint
TSEVariables
v1.8.1
v1.8
v1.7
v1.6
v1.5
v1.4
v1.3.1
v1.3
v1.2 Beta
Backward Compatibility
Explanation
System
OnEventVariables
Registration
Testmap
Variables
Revive
Full Vision
Make Ally
Untitled Trigger 001
Enter map-specific custom script code below. This text will be included in the map script after variables are declared and before any trigger code.
Name Type is_array initial_value
MeteorS_Ability abilcode No
MeteorS_AT attacktype No
MeteorS_DT damagetype No
MeteorS_FallDelay real Yes
MeteorS_FilterB boolean No
MeteorS_FilterT trigger No
MeteorS_FilterU unit No
MeteorS_I_Chant effect Yes
MeteorS_I_Level integer Yes
MeteorS_ImpactDamage real Yes
MeteorS_ImpactRadius real Yes
MeteorS_Level integer No
MeteorS_SFXChant string No
MeteorS_SFXMeteor string No
MeteorS_SizeMultiChant real Yes
MeteorS_SizeMultiMeteor real Yes
TempLoc location No
TempUnit unit No
TSE__ActiveIndex integer No
TSE__Point location No
TSE__RemainingDuration real No
TSE__SourceUnit unit No
TSE__SpecialEffect effect No
TSE__TargetUnit unit No
TSE_CTimer timer No
TSE_EmptyEvent trigger No
TSE_I_ActiveInstance boolean Yes
TSE_I_ChanneledOrderID string Yes
TSE_I_Effect effect Yes
TSE_I_IsChanneling boolean Yes
TSE_I_LockInstance boolean Yes
TSE_I_LoopDuration real Yes
TSE_I_OnEndEvent trigger Yes
TSE_I_OnLoopEvent trigger Yes
TSE_I_OnLoopTimer real Yes
TSE_I_Point location Yes
TSE_I_RemainingDuration real Yes
TSE_I_SourceUnit unit Yes
TSE_I_SourceUnitAliveCheck boolean Yes
TSE_I_TargetUnit unit Yes
TSE_I_TargetUnitAliveCheck boolean Yes
TSE_Index integer No
TSE_LoopTrigger trigger No
TSE_MaxCheckOver boolean No
TSE_MaxIndex integer No
TSE_MaxRecursion integer No
TSE_Recursion integer No
TSE_RegisterTrigger trigger No
TSE_ReplacementIndex integer No
TSE_ReplacementIndexFound boolean No
TSE_TIMEOUT real No
TSEAttachPoint string No
TSEChanneledOrderID string No
TSEDuration real No
TSEEffectName string No
TSELockInstance boolean No
TSEOnEndEvent trigger No
TSEOnIndexEvent trigger No
TSEOnLoopEvent trigger No
TSEOnLoopTimer real No
TSEPoint location No
TSEScale real No
TSESourceUnit unit No
TSESourceUnitAliveCheck boolean No
TSETargetUnit unit No
TSETargetUnitAliveCheck boolean No
TSEUnit unit No
TSEUnitAliveCheck boolean No
MeteorSConfig
Events
Map initialization
Conditions
Actions
-------- Meteor Strike ability --------
Set Variable Set MeteorS_Ability = "A000"
-------- Damage dealt upon impact --------
Set Variable Set MeteorS_ImpactDamage[1] = "100.00"
Set Variable Set MeteorS_ImpactDamage[2] = "200.00"
Set Variable Set MeteorS_ImpactDamage[3] = "300.00"
Set Variable Set MeteorS_AT = Spells
Set Variable Set MeteorS_DT = Normal
-------- Impact radius of the meteor --------
Set Variable Set MeteorS_ImpactRadius[1] = "800.00"
Set Variable Set MeteorS_ImpactRadius[2] = "800.00"
Set Variable Set MeteorS_ImpactRadius[3] = "800.00"
-------- Delay for the meteor to hit --------
Set Variable Set MeteorS_FallDelay[1] = "1.00"
Set Variable Set MeteorS_FallDelay[2] = "1.00"
Set Variable Set MeteorS_FallDelay[3] = "1.00"
-------- Meteor Chant size --------
Set Variable Set MeteorS_SizeMultiChant[1] = "8.00"
Set Variable Set MeteorS_SizeMultiChant[2] = "8.00"
Set Variable Set MeteorS_SizeMultiChant[3] = "8.00"
-------- Meteor Drop size --------
Set Variable Set MeteorS_SizeMultiMeteor[1] = "8.00"
Set Variable Set MeteorS_SizeMultiMeteor[2] = "8.00"
Set Variable Set MeteorS_SizeMultiMeteor[3] = "8.00"
-------- Meteor Chant SFX --------
Set Variable Set MeteorS_SFXChant = "war3mapImported\SpellMarkerRed.mdx"
-------- Meteor Drop SFX --------
Set Variable Set MeteorS_SFXMeteor = "Units\Demon\Infernal\InfernalBirth.mdl"
-------- Filter Trigger --------
Set Variable Set MeteorS_FilterT = MeteorSFilter <gen>
MeteorSCast
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to MeteorS_Ability
Actions
Set Variable Set MeteorS_Level = (Level of MeteorS_Ability for (Triggering unit))
-------- CORE --------
-------- TSEDuration is the duration of the effect --------
Set Variable Set TSEDuration = MeteorS_FallDelay[MeteorS_Level]
-------- TSEEffectName is the string to the effect file --------
Set Variable Set TSEEffectName = MeteorS_SFXMeteor
-------- TSEPoint is the position of the effect created --------
Set Variable Set TSEPoint = (Target point of ability being cast)
-------- TSEScale for scaling position-based effect --------
Set Variable Set TSEScale = MeteorS_SizeMultiMeteor[MeteorS_Level]
-------- EXTENSION --------
-------- TSESourceUnit refers to the source of the buff, useful if the TargetUnit and SourceUnit are two different units --------
-------- KNOWN ISSUE TILL V1.5: If SourceUnit is set to a unit and the SourceUnit is killed, the buff will immediately ceased --------
-------- KNOWN ISSUE TILL V1.5: (cont) so if the buff is not tied to the state of the source, it is preferred to not be set --------
Set Variable Set TSESourceUnit = (Triggering unit)
-------- TSESourceUnitAliveCheck is to troubleshoot the KNOWN ISSUE for v1.5 --------
-------- Since it is considered an issue, the default state is now to ignore SourceUnit state (False) --------
Set Variable Set TSESourceUnitAliveCheck = "false"
-------- TSEChanneledOrderID is used for buff tied with channeling spells --------
-------- The buff immediately ceased if the channeling spell ends --------
Set Variable Set TSEChanneledOrderID = ""
-------- TSEChanneledOrderID is used for buff tied with channeling spells --------
-------- TSEOnIndexEvent is an event that runs when the effect is created (directly at moment of effect creation). Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnIndexEvent = MeteorSIndex <gen>
-------- TSEOnLoopEvent is an event that runs every TSEOnLoopTimer seconds. Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnLoopEvent = TSEOnLoopEvent
-------- TSEOnLoopTimer is the duration between each tick of the loop --------
-------- Setting this allows better control over the OnLoopEvent instead of dealing with TSE_TIMEOUT global --------
-------- This variable cannot be lower than TSE_TIMEOUT --------
Set Variable Set TSEOnLoopTimer = MeteorS_FallDelay[MeteorS_Level]
-------- TSEOnEndEvent is an event that runs when the effect is about to be destroyed. Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnEndEvent = MeteorSImpact <gen>
-------- If you utilize external array variables tied to TSE__ActiveIndex (v1.6+) OR TSE_Index /TSE_MaxIndex (v1.5-) in any of the event, YOU MUST SET LOCK INSTANCE TO TRUE --------
-------- Else, it is recommended to set this to false so the system performs better --------
Set Variable Set TSELockInstance = "true"
-------- END --------
-------- After all core variables are set, run TSE_RegisterTrigger --------
Trigger - Run TSE_RegisterTrigger (checking conditions)
MeteorSIndex
Events
Conditions
Actions
Set Variable Set MeteorS_I_Level[TSE__ActiveIndex] = (Level of MeteorS_Ability for TSE__SourceUnit)
Special Effect - Create a special effect at TSE__Point using MeteorS_SFXChant
Special Effect - Set Scale of (Last created special effect) to MeteorS_SizeMultiChant[MeteorS_I_Level[TSE__ActiveIndex]]
Set Variable Set MeteorS_I_Chant[TSE__ActiveIndex] = (Last created special effect)
MeteorSImpact
Events
Conditions
Actions
Set Variable Set MeteorS_Level = MeteorS_I_Level[TSE__ActiveIndex]
Special Effect - Destroy MeteorS_I_Chant[TSE__ActiveIndex]
Unit Group - Pick every unit in (Units within MeteorS_ImpactRadius[MeteorS_Level] of TSE__Point.) and do (Actions)
Loop - Actions
Set Variable Set MeteorS_FilterU = (Picked unit)
Set Variable Set MeteorS_FilterB = "false"
Trigger - Run MeteorS_FilterT (checking conditions)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MeteorS_FilterB Equal to True
Then - Actions
Unit - Cause TSE__SourceUnit to damage MeteorS_FilterU , dealing MeteorS_ImpactDamage[MeteorS_Level] damage of attack type MeteorS_AT and damage type MeteorS_DT
Else - Actions
MeteorSFilter
Events
Conditions
(MeteorS_FilterU belongs to an enemy of (Owner of TSE__SourceUnit).) Equal to True
Actions
Set Variable Set MeteorS_FilterB = "true"
TSEConfig
Events
Map initialization
Conditions
Actions
-------- CORE --------
-------- Set to TSELoop trigger --------
Set Variable Set TSE_LoopTrigger = TSELoop <gen>
-------- Set to TSERegister trigger --------
Set Variable Set TSE_RegisterTrigger = TSERegister <gen>
-------- Set to TSEEmptyEvent trigger --------
Set Variable Set TSE_EmptyEvent = TSEEmptyEvent <gen>
-------- DO NOT CHANGE --------
-------- UNLESS YOU KNOW WHAT YOU ARE DOING --------
-------- Default timeout for effect check --------
-------- Recommended value: 0.03-0.10 --------
-------- Default: 0.03125 (1/32) --------
-------- Low End Performance: 0.1, 0.05 --------
-------- Extreme Precision: 1/64, 1/128 --------
Set Variable Set TSE_TIMEOUT = (1.00 / 32.00)
-------- Recursion for Lock Instance tolerance --------
-------- A safety feature if infinite loops happened when Lock Instance is utilized, although theorically it should not be triggered at all --------
-------- It is recommended to keep this at numbers ideally higher than generally possible instances until TSE is suspected of freezing the map due to loops --------
Set Variable Set TSE_MaxRecursion = "32767"
-------- END CONFIG --------
-------- Default values for some variables --------
Set Variable Set TSEScale = "1.00"
TSERegister
Events
Conditions
Actions
-------- Backward compatibility --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSEUnit Not equal to No unit
TSETargetUnit Equal to No unit
Then - Actions
Set Variable Set TSETargetUnit = TSEUnit
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
Or - Any (Conditions) are true
Conditions
TSETargetUnitAliveCheck Equal to True
TSEUnitAliveCheck Equal to True
Then - Actions
Set Variable Set TSETargetUnitAliveCheck = "true"
Else - Actions
-------- Register effect instance --------
Set Variable Set TSE_MaxIndex = (TSE_MaxIndex + 1)
Set Variable Set TSE_I_RemainingDuration[TSE_MaxIndex] = TSEDuration
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSETargetUnit Not equal to No unit
Then - Actions
Special Effect - Create a special effect attached to the TSEAttachPoint of TSETargetUnit using TSEEffectName
Set Variable Set TSE_I_TargetUnitAliveCheck[TSE_MaxIndex] = TSETargetUnitAliveCheck
Else - Actions
Special Effect - Create a special effect at TSEPoint using TSEEffectName
Set Variable Set TSE_I_TargetUnitAliveCheck[TSE_MaxIndex] = "false"
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSESourceUnit Not equal to No unit
Then - Actions
Set Variable Set TSE_I_SourceUnitAliveCheck[TSE_MaxIndex] = TSESourceUnitAliveCheck
Else - Actions
Set Variable Set TSE_I_Effect[TSE_MaxIndex] = (Last created special effect)
Special Effect - Set Scale of TSE_I_Effect[TSE_MaxIndex] to TSEScale
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSEChanneledOrderID Not equal to
Then - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSESourceUnit Not equal to No unit
Then - Actions
Set Variable Set TSE_I_IsChanneling[TSE_MaxIndex] = "true"
Else - Actions
Game - Display to (All players) the text: |cffff0000WARNING: A Channeling Spell without Source Unit detected!|r
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSEOnLoopTimer Less than TSE_TIMEOUT
Then - Actions
Set Variable Set TSEOnLoopTimer = TSE_TIMEOUT
Else - Actions
Set Variable Set TSE_I_SourceUnit[TSE_MaxIndex] = TSESourceUnit
Set Variable Set TSE_I_TargetUnit[TSE_MaxIndex] = TSETargetUnit
Set Variable Set TSE_I_ChanneledOrderID[TSE_MaxIndex] = TSEChanneledOrderID
Set Variable Set TSE_I_OnLoopEvent[TSE_MaxIndex] = TSEOnLoopEvent
Set Variable Set TSE_I_OnLoopTimer[TSE_MaxIndex] = TSEOnLoopTimer
Set Variable Set TSE_I_LoopDuration[TSE_MaxIndex] = TSEOnLoopTimer
Set Variable Set TSE_I_OnEndEvent[TSE_MaxIndex] = TSEOnEndEvent
Set Variable Set TSE_I_LockInstance[TSE_MaxIndex] = TSELockInstance
Set Variable Set TSE_I_ActiveInstance[TSE_MaxIndex] = "true"
Set Variable Set TSE_I_Point[TSE_MaxIndex] = TSEPoint
-------- OnEvent Variables --------
Set Variable Set TSE__ActiveIndex = TSE_MaxIndex
Set Variable Set TSE__RemainingDuration = TSE_I_RemainingDuration[TSE__ActiveIndex]
Set Variable Set TSE__SourceUnit = TSE_I_SourceUnit[TSE__ActiveIndex]
Set Variable Set TSE__TargetUnit = TSE_I_TargetUnit[TSE__ActiveIndex]
Set Variable Set TSE__Point = TSE_I_Point[TSE__ActiveIndex]
Set Variable Set TSE__SpecialEffect = TSE_I_Effect[TSE__ActiveIndex]
-------- Run OnIndexEvent --------
Trigger - Run TSEOnIndexEvent (checking conditions)
Set Variable Set TSE_I_RemainingDuration[TSE__ActiveIndex] = TSE__RemainingDuration
-------- Loop Check --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSE_MaxIndex Equal to 1
Then - Actions
Countdown Timer - Start TSE_CTimer as a Repeating timer that will expire in TSE_TIMEOUT seconds
Trigger - Turn on TSE_LoopTrigger
Else - Actions
-------- Clean information for next registration --------
Set Variable Set TSETargetUnit = No unit
Set Variable Set TSETargetUnitAliveCheck = "false"
Set Variable Set TSEScale = "1.00"
Set Variable Set TSEChanneledOrderID = ""
Set Variable Set TSESourceUnit = No unit
Set Variable Set TSEOnIndexEvent = TSE_EmptyEvent
Set Variable Set TSEOnLoopEvent = TSE_EmptyEvent
Set Variable Set TSEOnLoopTimer = TSE_TIMEOUT
Set Variable Set TSEOnEndEvent = TSE_EmptyEvent
Set Variable Set TSELockInstance = "false"
-------- DEPRECATED --------
Set Variable Set TSEUnit = No unit
Set Variable Set TSEUnitAliveCheck = "false"
TSELoop
Events
Time - TSE_CTimer expires
Conditions
Actions
For each (Integer TSE_Index ) from 1 to TSE_MaxIndex , do (Actions)
Loop - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSE_I_ActiveInstance[TSE_Index] Equal to True
Then - Actions
Set Variable Set TSE_I_RemainingDuration[TSE_Index] = (TSE_I_RemainingDuration[TSE_Index] - TSE_TIMEOUT)
Set Variable Set TSE_I_LoopDuration[TSE_Index] = (TSE_I_LoopDuration[TSE_Index] - TSE_TIMEOUT)
-------- Check if this is time for loop event --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSE_I_LoopDuration[TSE_Index] Less than or equal to 0.00
Then - Actions
-------- OnEvent Variables --------
Set Variable Set TSE__ActiveIndex = TSE_Index
Set Variable Set TSE__RemainingDuration = TSE_I_RemainingDuration[TSE__ActiveIndex]
Set Variable Set TSE__SourceUnit = TSE_I_SourceUnit[TSE__ActiveIndex]
Set Variable Set TSE__TargetUnit = TSE_I_TargetUnit[TSE__ActiveIndex]
Set Variable Set TSE__Point = TSE_I_Point[TSE__ActiveIndex]
Set Variable Set TSE__SpecialEffect = TSE_I_Effect[TSE__ActiveIndex]
-------- OnLoopEvent --------
Trigger - Run TSE_I_OnLoopEvent[TSE_Index] (checking conditions)
Set Variable Set TSE_I_RemainingDuration[TSE__ActiveIndex] = TSE__RemainingDuration
-------- Reset Loop Timer --------
Set Variable Set TSE_I_LoopDuration[TSE_Index] = TSE_I_OnLoopTimer[TSE_Index]
Else - Actions
-------- Loop conditional check --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSE_I_TargetUnitAliveCheck[TSE_Index] Equal to True
(TSE_I_TargetUnit[TSE_Index] is alive) Equal to False
Then - Actions
Set Variable Set TSE_I_RemainingDuration[TSE_Index] = "0.00"
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSE_I_SourceUnitAliveCheck[TSE_Index] Equal to True
(TSE_I_SourceUnit[TSE_Index] is alive) Equal to False
TSE_I_SourceUnit[TSE_Index] Not equal to No unit
Then - Actions
Set Variable Set TSE_I_RemainingDuration[TSE_Index] = "0.00"
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSE_I_IsChanneling[TSE_Index] Equal to True
(Current order of TSE_I_SourceUnit[TSE_Index]) Not equal to (Order(TSE_I_ChanneledOrderID[TSE_Index]))
Then - Actions
Set Variable Set TSE_I_RemainingDuration[TSE_Index] = "0.00"
Else - Actions
-------- End phase check --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSE_I_RemainingDuration[TSE_Index] Less than or equal to 0.00
Then - Actions
-------- OnEvent Variables --------
Set Variable Set TSE__ActiveIndex = TSE_Index
Set Variable Set TSE__RemainingDuration = TSE_I_RemainingDuration[TSE__ActiveIndex]
Set Variable Set TSE__SourceUnit = TSE_I_SourceUnit[TSE__ActiveIndex]
Set Variable Set TSE__TargetUnit = TSE_I_TargetUnit[TSE__ActiveIndex]
Set Variable Set TSE__Point = TSE_I_Point[TSE__ActiveIndex]
Set Variable Set TSE__SpecialEffect = TSE_I_Effect[TSE__ActiveIndex]
-------- OnEndEvent --------
Trigger - Run TSE_I_OnEndEvent[TSE_Index] (checking conditions)
-------- De-indexing Phase --------
Special Effect - Destroy TSE_I_Effect[TSE_Index]
Set Variable Set TSE_ReplacementIndexFound = "false"
Set Variable Set TSE_ReplacementIndex = TSE_MaxIndex
Set Variable Set TSE_Recursion = "0"
Custom script: loop
Set Variable Set TSE_Recursion = (TSE_Recursion + 1)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
Or - Any (Conditions) are true
Conditions
TSE_Recursion Greater than or equal to TSE_MaxRecursion
And - All (Conditions) are true
Conditions
TSE_I_LockInstance[TSE_ReplacementIndex] Equal to False
TSE_I_ActiveInstance[TSE_ReplacementIndex] Equal to True
TSE_ReplacementIndex Equal to TSE_Index
Then - Actions
Set Variable Set TSE_ReplacementIndexFound = "true"
Else - Actions
Set Variable Set TSE_ReplacementIndex = (TSE_ReplacementIndex - 1)
Custom script: exitwhen udg_TSE_ReplacementIndexFound == true
Custom script: endloop
Custom script: call RemoveLocation(udg_TSE_I_Point[udg_TSE_Index])
Set Variable Set TSE_I_Point[TSE_Index] = TSE_I_Point[TSE_ReplacementIndex]
Set Variable Set TSE_I_RemainingDuration[TSE_Index] = TSE_I_RemainingDuration[TSE_ReplacementIndex]
Set Variable Set TSE_I_Effect[TSE_Index] = TSE_I_Effect[TSE_ReplacementIndex]
Set Variable Set TSE_I_ChanneledOrderID[TSE_Index] = TSE_I_ChanneledOrderID[TSE_ReplacementIndex]
Set Variable Set TSE_I_IsChanneling[TSE_Index] = TSE_I_IsChanneling[TSE_ReplacementIndex]
Set Variable Set TSE_I_SourceUnit[TSE_Index] = TSE_I_SourceUnit[TSE_ReplacementIndex]
Set Variable Set TSE_I_SourceUnitAliveCheck[TSE_Index] = TSE_I_SourceUnitAliveCheck[TSE_ReplacementIndex]
Set Variable Set TSE_I_TargetUnitAliveCheck[TSE_Index] = TSE_I_TargetUnitAliveCheck[TSE_ReplacementIndex]
Set Variable Set TSE_I_TargetUnit[TSE_Index] = TSE_I_TargetUnit[TSE_ReplacementIndex]
Set Variable Set TSE_I_OnLoopEvent[TSE_Index] = TSE_I_OnLoopEvent[TSE_ReplacementIndex]
Set Variable Set TSE_I_OnLoopTimer[TSE_Index] = TSE_I_OnLoopTimer[TSE_ReplacementIndex]
Set Variable Set TSE_I_LoopDuration[TSE_Index] = TSE_I_LoopDuration[TSE_ReplacementIndex]
Set Variable Set TSE_I_OnEndEvent[TSE_Index] = TSE_I_OnEndEvent[TSE_ReplacementIndex]
Set Variable Set TSE_I_LockInstance[TSE_Index] = TSE_I_LockInstance[TSE_ReplacementIndex]
Set Variable Set TSE_I_LockInstance[TSE_ReplacementIndex] = "false"
Set Variable Set TSE_I_ActiveInstance[TSE_Index] = TSE_I_ActiveInstance[TSE_ReplacementIndex]
Set Variable Set TSE_I_ActiveInstance[TSE_ReplacementIndex] = "false"
Set Variable Set TSE_Index = (TSE_Index - 1)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
Or - Any (Conditions) are true
Conditions
TSE_ReplacementIndex Equal to TSE_MaxIndex
TSE_I_ActiveInstance[TSE_MaxIndex] Equal to False
Then - Actions
Set Variable Set TSE_MaxCheckOver = "false"
Custom script: loop
Set Variable Set TSE_MaxIndex = (TSE_MaxIndex - 1)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
Or - Any (Conditions) are true
Conditions
TSE_I_ActiveInstance[TSE_MaxIndex] Equal to True
TSE_MaxIndex Less than or equal to 0
Then - Actions
Set Variable Set TSE_MaxCheckOver = "true"
Else - Actions
Custom script: exitwhen udg_TSE_MaxCheckOver == true
Custom script: endloop
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
TSE_MaxIndex Less than or equal to 0
Then - Actions
Countdown Timer - Pause TSE_CTimer
Trigger - Turn off TSE_LoopTrigger
Else - Actions
Else - Actions
Else - Actions
TSEEmptyEvent
Events
Conditions
Actions
TSESampleRegisterUnit
Events
Conditions
Actions
-------- CORE --------
-------- TSEDuration is the duration of the effect --------
Set Variable Set TSEDuration = "10.00"
-------- TSETargetUnit determine which unit has this effect attached --------
Set Variable Set TSETargetUnit = (Triggering unit)
-------- TSEAttachPoint is only used in conjunction with TargetUnit to determine in which part of unit it is placed --------
Set Variable Set TSEAttachPoint = "left hand"
-------- EffectName is the string to the effect file --------
Set Variable Set TSEEffectName = "war3mapImported/Soul Bow Enchantment Necro.mdx"
-------- EXTENSION --------
-------- TSETargetUnitAliveCheck refers to whether the attached effect account whether the unit is alive or not --------
Set Variable Set TSETargetUnitAliveCheck = "false"
-------- TSESourceUnit refers to the source of the buff, useful if the TargetUnit and SourceUnit are two different units --------
-------- KNOWN ISSUE TILL V1.5: If SourceUnit is set to a unit and the SourceUnit is killed, the buff will immediately ceased --------
-------- KNOWN ISSUE TILL V1.5: (cont) so if the buff is not tied to the state of the source, it is preferred to not be set --------
Set Variable Set TSESourceUnit = (Triggering unit)
-------- TSESourceUnitAliveCheck is to troubleshoot the KNOWN ISSUE for v1.5 --------
-------- Since it is considered an issue, the default state is now to ignore SourceUnit state (False) --------
Set Variable Set TSESourceUnitAliveCheck = "false"
-------- TSEChanneledOrderID is used for buff tied with channeling spells --------
-------- The buff immediately ceased if the channeling spell ends --------
Set Variable Set TSEChanneledOrderID = "blizzard"
-------- TSEChanneledOrderID is used for buff tied with channeling spells --------
-------- TSEOnIndexEvent is an event that runs when the effect is created (directly at moment of effect creation). Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnIndexEvent = TSEOnIndexEvent
-------- TSEOnLoopEvent is an event that runs every TSEOnLoopTimer seconds. Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnLoopEvent = TSEOnLoopEvent
-------- TSEOnLoopTimer is the duration between each tick of the loop --------
-------- Setting this allows better control over the OnLoopEvent instead of dealing with TSE_TIMEOUT global --------
-------- This variable cannot be lower than TSE_TIMEOUT --------
Set Variable Set TSEOnLoopTimer = "1.00"
-------- TSEOnEndEvent is an event that runs when the effect is about to be destroyed. Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnEndEvent = TSEOnEndEvent
-------- If you utilize external array variables tied to TSE__ActiveIndex (v1.6+) OR TSE_Index /TSE_MaxIndex (v1.5-) in any of the event, YOU MUST SET LOCK INSTANCE TO TRUE --------
-------- Else, it is recommended to set this to false so the system performs better --------
Set Variable Set TSELockInstance = "false"
-------- END --------
-------- After all core variables are set, run TSE_RegisterTrigger --------
Trigger - Run TSE_RegisterTrigger (checking conditions)
TSESampleRegisterPoint
Events
Conditions
Actions
-------- CORE --------
-------- TSEDuration is the duration of the effect --------
Set Variable Set TSEDuration = "16.00"
-------- TSEEffectName is the string to the effect file --------
Set Variable Set TSEEffectName = "Abilities\Spells\Human\CloudOfFog\CloudOfFog.mdl"
-------- TSEPoint is the position of the effect created --------
Set Variable Set TSEPoint = (Target point of ability being cast)
-------- TSEScale for scaling position-based effect --------
Set Variable Set TSEScale = "1.00"
-------- EXTENSION --------
-------- TSESourceUnit refers to the source of the buff, useful if the TargetUnit and SourceUnit are two different units --------
-------- KNOWN ISSUE TILL V1.5: If SourceUnit is set to a unit and the SourceUnit is killed, the buff will immediately ceased --------
-------- KNOWN ISSUE TILL V1.5: (cont) so if the buff is not tied to the state of the source, it is preferred to not be set --------
Set Variable Set TSESourceUnit = (Triggering unit)
-------- TSESourceUnitAliveCheck is to troubleshoot the KNOWN ISSUE for v1.5 --------
-------- Since it is considered an issue, the default state is now to ignore SourceUnit state (False) --------
Set Variable Set TSESourceUnitAliveCheck = "false"
-------- TSEChanneledOrderID is used for buff tied with channeling spells --------
-------- The buff immediately ceased if the channeling spell ends --------
Set Variable Set TSEChanneledOrderID = "blizzard"
-------- TSEChanneledOrderID is used for buff tied with channeling spells --------
-------- TSEOnIndexEvent is an event that runs when the effect is created (directly at moment of effect creation). Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnIndexEvent = TSEOnIndexEvent
-------- TSEOnLoopEvent is an event that runs every TSEOnLoopTimer seconds. Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnLoopEvent = TSEOnLoopEvent
-------- TSEOnLoopTimer is the duration between each tick of the loop --------
-------- Setting this allows better control over the OnLoopEvent instead of dealing with TSE_TIMEOUT global --------
-------- This variable cannot be lower than TSE_TIMEOUT --------
Set Variable Set TSEOnLoopTimer = "1.00"
-------- TSEOnEndEvent is an event that runs when the effect is about to be destroyed. Refer to data with TSE__ActiveIndex. --------
-------- Read TSELockInstance notes if external array variables uses TSE__ActiveIndex. --------
Set Variable Set TSEOnEndEvent = TSEOnEndEvent
-------- If you utilize external array variables tied to TSE__ActiveIndex (v1.6+) OR TSE_Index /TSE_MaxIndex (v1.5-) in any of the event, YOU MUST SET LOCK INSTANCE TO TRUE --------
-------- Else, it is recommended to set this to false so the system performs better --------
Set Variable Set TSELockInstance = "false"
-------- END --------
-------- After all core variables are set, run TSE_RegisterTrigger --------
Trigger - Run TSE_RegisterTrigger (checking conditions)
- Improved TSESampleRegisterPoint by adding TSEScale into the sample
> It has been available for multiple versions, but I missed it on 1.6 update for the samples
- Fixed an issue with TimedSpecialEffect loop
- TSE__RemainingDuration can now be altered to modify the duration of the effect for OnIndex and OnLoop
- Fixed a bug that if the first effect created by TSE is a point effect, it will be affected by the new scale native and rendered it invisible
- Added a disabled theory trigger to showcase that Set Scale does not affect unit-attached effects
- Added an example of register event for both unit and point
- Added SourceUnitAliveCheck --> Solution for an issue discovered in v1.5
- Added OnEvent variables that allowed better readability of OnEvent triggers --> all are READ-ONLY
- MAJOR FIX: Resolve a hidden issue where indexes of TSE are not properly deallocated at times, especially after dealing with instances that has LockInstance = True
- Changed the timer scheme from using the add event to a Countdown Timer based approach due to 1.32+ patches having a limit of 100 Hz
- Point is now preserved into the TSE data if declared and can be accessed via TSE_I_Point
- Added LockInstance capability
- Provided some Recursion safety for the Lock Instance feature, although it is more of additional safety layers
- Fixed a critical bug with the newly added event feature
- Added ability to register triggers on events: OnIndexEvent, OnLoopEvent, OnEndEvent
> OnIndexEvent runs once the system finish indexing (register) all relevant data
> OnLoopEvent runs every TSE_TIMEOUT while the effect is active
> OnEndEvent runs when the system is about to deindex the instance
- Changed TSEUnit to TSETargetUnit
- Added backward compatibility to v1.1 and earlier (TSE_Unit should not be used for those using v1.2 forward)
- Changed TSEMaxIndex to TSE_MaxIndex
- Changed TSEUnitAliveChecks to TSE_I_UnitAliveCheck
- Changed TSEIsChannelings to TSE_I_IsChanneling
- Changed TSESourceUnits to TSE_I_SourceUnit
- Changed TSEChanneledOrderIDs to TSE_I_ChanneledOrderID
- Changed TSEEffects to TSE_I_Effect
- Changed TSERemainingDurs to TSE_I_RemainingDuration
- Changed TSETimeout to TSE_TIMEOUT
- Changed TSERegister to TSE_RegisterTrigger
- Changed TSETargetUnits to TSE_I_TargetUnit
- Changed TSEIndexLoop to TSE_Index
This folder contain variables from past versions that have been deprecated for one reason or another
It is provided as a safety measure when people changed versions of TSE
Revive
Events
Unit - A unit Dies
Conditions
(Unit-type of (Triggering unit)) Not equal to Spell Master
Actions
Set Variable Set TempUnit = (Triggering unit)
Set Variable Set TempLoc = (Random point in (Playable map area))
Unit - Create 1 . (Unit-type of (Triggering unit)) for (Player((Random integer number between 2 and 12))) at TempLoc facing Default building facing degrees
Custom script: call RemoveLocation(udg_TempLoc)
Full Vision
Events
Map initialization
Conditions
Actions
Visibility - Disable fog of war
Visibility - Disable black mask
Make Ally
Events
Map initialization
Conditions
Actions
Player - Make Player 2 (Blue) treat Player 1 (Red) as an Ally
Player - Make Player 3 (Teal) treat Player 1 (Red) as an Ally
Untitled Trigger 001
Events
Player - Player 1 (Red) skips a cinematic sequence
Conditions
Actions
For each (Integer A) from 1 to 9 , do (Actions)
Loop - Actions
Destructible - Create a LTlt (Unexpected type: 'destructablecode') at ((Position of Spell Master 0002 <gen>) offset by 256 towards (40.00 x (Real((Integer A)))) degrees.) facing (Random angle) with scale 1 and variation 0
Top