How to import Malacath

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Malacath of the bundle Malacath. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Statues of Daedric Princes.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Malacath_statue.mdx

Now Click the "Import File" Button:

Next select 'Malacath_statue.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file Malacath_statue.mdx.

Importing TX_DAED_MALACATH_BACKTORSO.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_BACKTORSO.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_BACKTORSO.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_BACKTORSO.blp.

Importing TX_DAED_MALACATH_BELT_CENTER_PIECE.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_BELT_CENTER_PIECE.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_BELT_CENTER_PIECE.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_BELT_CENTER_PIECE.blp.

Importing TX_DAED_MALACATH_EAR.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_EAR.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_EAR.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_EAR.blp.

Importing TX_DAED_MALACATH_FACE.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_FACE.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_FACE.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_FACE.blp.

Importing TX_DAED_MALACATH_FEET.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_FEET.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_FEET.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_FEET.blp.

Importing TX_DAED_MALACATH_FRONTTORSO.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_FRONTTORSO.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_FRONTTORSO.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_FRONTTORSO.blp.

Importing TX_DAED_MALACATH_HAIR.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_HAIR.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_HAIR.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_HAIR.blp.

Importing TX_DAED_MALACATH_HAND.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_HAND.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_HAND.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_HAND.blp.

Importing TX_DAED_MALACATH_LOWER_LEG.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_LOWER_LEG.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_LOWER_LEG.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_LOWER_LEG.blp.

Importing TX_DAED_MALACATH_SKIRTBACK.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_SKIRTBACK.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_SKIRTBACK.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_SKIRTBACK.blp.

Importing TX_DAED_MALACATH_SKIRTFRONT.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_SKIRTFRONT.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_SKIRTFRONT.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_SKIRTFRONT.blp.

Importing TX_DAED_MALACATH_SMALL.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_SMALL.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_SMALL.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_SMALL.blp.

Importing TX_DAED_MALACATH_SWORD.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_SWORD.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_SWORD.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_SWORD.blp.

Importing TX_DAED_MALACATH_UPPER_LEG.blp

Now Click the "Import File" Button:

Next select 'TX_DAED_MALACATH_UPPER_LEG.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file TX_DAED_MALACATH_UPPER_LEG.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file TX_DAED_MALACATH_UPPER_LEG.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.