• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

Triggers

Magical Daggers v1.1.w3x
Variables
Initialization
Map Init
Creep Respawn
Magical Daggers
Importing Instruction
MDG Init
MDG Cast
MDG Loop
Enter map-specific custom script code below. This text will be included in the map script after variables are declared and before any trigger code.
Name Type is_array initial_value
MDG_2ndDamage real Yes
MDG_Ability abilcode No
MDG_Angle real Yes
MDG_Angle2 real Yes
MDG_AoE real Yes
MDG_Attachment string Yes
MDG_AttackType attacktype No
MDG_BaseSpeed real Yes
MDG_Caster unit Yes
MDG_CDummy unitcode No
MDG_Counter real Yes
MDG_CurDistance real Yes
MDG_CurIndex integer No
MDG_DAbility abilcode No
MDG_Damage real Yes
MDG_DamagedGroup group Yes
MDG_DamagedGroup2 group Yes
MDG_DamageType damagetype No
MDG_DummyCast unit No
MDG_Duration real Yes
MDG_Effect effect Yes
MDG_Effect2 effect Yes
MDG_Gap real Yes
MDG_Level integer Yes
MDG_Loc location Yes
MDG_MaxDistance real Yes
MDG_MaxIndex integer No
MDG_MDummy unitcode No
MDG_Missile unit Yes
MDG_Missile2 unit Yes
MDG_Numbers integer Yes
MDG_PeriodicTimer real No
MDG_Player player Yes
MDG_SDummy unitcode No
MDG_SFX string Yes
MDG_SFXDummy unit Yes
MDG_Speed real Yes
MDG_Stage integer Yes
MDG_StartAngle real No
MDG_StartOffset real Yes
MDG_TempAngle real No
MDG_TempCaster unit No
MDG_TempInteger integer No
MDG_TempLevel integer No
MDG_TempPlayer player No
MDG_TempSpeed real No
MDG_TempUnit unit No
MDG_UndamagedGroup group Yes
MDG_UndamagedGroup2 group Yes
Map Init
Events
Map initialization
Conditions
Actions
Game - Display to (All players) for 30 seconds the text: |cffffcc00=========================================|r
Game - Display to (All players) for 30 seconds the text: |cffffcc00Welcome to Magical Daggers Testmap|r
Game - Display to (All players) for 30 seconds the text: |cffffcc00By Rheiko|r
Game - Display to (All players) for 30 seconds the text: |cffffcc00=========================================|r
Game - Display to (All players) for 30 seconds the text: |cffffcc00Remember to give credits if you use this in your map!|r
Creep Respawn
Events
Unit - A unit Dies
Conditions
(Owner of (Triggering unit)) Equal to Neutral Hostile
Actions
Wait 20.00 game-time seconds
Unit - Create 1 . (Unit-type of (Triggering unit)) for Neutral Hostile at (Position of (Triggering unit)) facing Default building facing degrees
=======================
IMPORTING INSTRUCTION
=======================
1. Copy Magical Daggers, Magical Daggers (Slow) Abilities
2. Copy Magical Daggers Buff
3. Import Moeity Dagger model file from this link -> https://www.hiveworkshop.com/threads/moiety-dagger.263082/#resource-36780
or just export the one in this map and import it to your map. Don't forget to credit Blood Raven for this awesome model.
4. Copy Magical Daggers Dummies (Missile, Caster, SFX)
5. Make sure your World Editor has "Automatically Create Unknown Variable" enabled. You can find it in File => Preferences
6. Copy all the triggers in "Magical Daggers" folder
7. Make sure the variables are assigned properly
8. Enjoy!
MDG Init
Events
Map initialization
Conditions
Actions
-------- Magical Daggers Ability --------
Set Variable Set MDG_Ability = "A000"
-------- Dummy's Ability; Magical Daggers (Slow) --------
Set Variable Set MDG_DAbility = "A001"
-------- Missile Dummy --------
Set Variable Set MDG_MDummy = "h001"
-------- SFX Dummy --------
Set Variable Set MDG_SDummy = "h000"
-------- Caster Dummy --------
Set Variable Set MDG_CDummy = "h002"
-------- Number of Daggers --------
Set Variable Set MDG_Numbers[1] = "5"
Set Variable Set MDG_Numbers[2] = "5"
Set Variable Set MDG_Numbers[3] = "5"
-------- Maximum Distance Traveled by Daggers --------
Set Variable Set MDG_MaxDistance[1] = "700.00"
Set Variable Set MDG_MaxDistance[2] = "700.00"
Set Variable Set MDG_MaxDistance[3] = "700.00"
-------- Damage Radius --------
Set Variable Set MDG_AoE[1] = "100.00"
Set Variable Set MDG_AoE[2] = "100.00"
Set Variable Set MDG_AoE[3] = "100.00"
-------- Damage per dagger --------
Set Variable Set MDG_Damage[1] = "50.00"
Set Variable Set MDG_Damage[2] = "75.00"
Set Variable Set MDG_Damage[3] = "100.00"
-------- Damage per dagger when they return --------
Set Variable Set MDG_2ndDamage[1] = "50.00"
Set Variable Set MDG_2ndDamage[2] = "75.00"
Set Variable Set MDG_2ndDamage[3] = "100.00"
-------- Attack Type & Damage Type --------
Set Variable Set MDG_AttackType = Spells
Set Variable Set MDG_DamageType = Magic
-------- Dagger's Projectile Speed --------
Set Variable Set MDG_BaseSpeed[1] = "1500.00"
Set Variable Set MDG_BaseSpeed[2] = "1500.00"
Set Variable Set MDG_BaseSpeed[3] = "1500.00"
-------- The Gap between each dagger --------
Set Variable Set MDG_Gap[1] = "15.00"
Set Variable Set MDG_Gap[2] = "20.00"
Set Variable Set MDG_Gap[3] = "20.00"
-------- The Duration until The Daggers return --------
Set Variable Set MDG_Duration[1] = "3.00"
Set Variable Set MDG_Duration[2] = "3.00"
Set Variable Set MDG_Duration[3] = "3.00"
-------- Location the daggers spawn --------
-------- Distance between Caster and Daggers --------
Set Variable Set MDG_StartOffset[1] = "50.00"
Set Variable Set MDG_StartOffset[2] = "50.00"
Set Variable Set MDG_StartOffset[3] = "50.00"
-------- Additional Special Effects --------
Set Variable Set MDG_SFX[1] = "Abilities\Spells\Other\Stampede\StampedeMissileDeath.mdl"
Set Variable Set MDG_SFX[2] = "Abilities\Spells\Orc\SpiritLink\SpiritLinkTarget.mdl"
-------- Attachment points (in case it does not work for certain models) --------
-------- MDG_Attachment[1] works for MDG_SFX[1] --------
Set Variable Set MDG_Attachment[1] = "chest"
-------- - --------
-------- +> OFF LIMIT <+ --------
-------- Do Not Change Anything Below This Point --------
-------- - --------
-------- The value of Periodic Timer in Looping Trigger --------
Set Variable Set MDG_PeriodicTimer = "0.03"
Trigger - Add to MDG_Loop <gen> the event (Every MDG_PeriodicTimer seconds of game time)
-------- - --------
Set Variable Set MDG_Loc[1] = (Center of (Playable map area))
-------- Preloading --------
Unit - Create 1 . MDG_MDummy for Player 1 (Red) at MDG_Loc[1] facing Default building facing degrees
Unit - Add MDG_DAbility to (Last created unit)
Unit - Remove MDG_DAbility from (Last created unit)
Unit - Add MDG_Ability to (Last created unit)
Unit - Remove MDG_Ability from (Last created unit)
Unit - Remove (Last created unit) from the game
-------- Create a caster dummy --------
Unit - Create 1 . MDG_CDummy for Neutral Passive at MDG_Loc[1] facing Default building facing degrees
Set Variable Set MDG_DummyCast = (Last created unit)
Unit - Add Magical Daggers (Slow) to MDG_DummyCast
-------- - --------
Custom script: call RemoveLocation(udg_MDG_Loc[1])
MDG Cast
Events
Unit - A unit Starts the effect of an ability
Conditions
(Ability being cast) Equal to MDG_Ability
Actions
-------- Store the Caster temporarily --------
Set Variable Set MDG_TempCaster = (Triggering unit)
-------- Store the Owner of Caster temporarily --------
Set Variable Set MDG_TempPlayer = (Triggering player)
-------- Store the Ability Level temporarily --------
Set Variable Set MDG_TempLevel = (Level of MDG_Ability for MDG_TempCaster)
-------- Store the Dagger Speed temporarily --------
Set Variable Set MDG_TempSpeed = (MDG_BaseSpeed[MDG_TempLevel] x 0.03)
-------- Store Temporary Locations and Angles --------
Set Variable Set MDG_Loc[1] = (Position of MDG_TempCaster)
Set Variable Set MDG_Loc[2] = (Target point of ability being cast)
Set Variable Set MDG_TempAngle = (Angle from MDG_Loc[1] to MDG_Loc[2])
-------- Setup the location for the projectile --------
Set Variable Set MDG_Loc[3] = (MDG_Loc[1] offset by MDG_StartOffset[MDG_Level[MDG_CurIndex]] towards MDG_TempAngle degrees.)
-------- - --------
For each (Integer MDG_TempInteger ) from 1 to (MDG_Numbers[MDG_TempLevel] / 2) , do (Actions)
Loop - Actions
-------- Alter the Starting Angle --------
Set Variable Set MDG_TempAngle = (MDG_TempAngle - MDG_Gap[MDG_TempLevel])
For each (Integer MDG_TempInteger ) from 1 to MDG_Numbers[MDG_TempLevel] , do (Actions)
Loop - Actions
-------- Increase Index --------
Set Variable Set MDG_MaxIndex = (MDG_MaxIndex + 1)
-------- Store the Caster for loop --------
Set Variable Set MDG_Caster[MDG_MaxIndex] = MDG_TempCaster
-------- Store the Player for loop --------
Set Variable Set MDG_Player[MDG_MaxIndex] = MDG_TempPlayer
-------- Store the Ability Level --------
Set Variable Set MDG_Level[MDG_MaxIndex] = MDG_TempLevel
-------- Setup the missile angle --------
Set Variable Set MDG_Angle[MDG_MaxIndex] = MDG_TempAngle
-------- Setup the missile speed --------
Set Variable Set MDG_Speed[MDG_MaxIndex] = MDG_TempSpeed
-------- Reduce the gap to form a fan-shape directions --------
Set Variable Set MDG_TempAngle = (MDG_TempAngle + MDG_Gap[MDG_TempLevel])
-------- Reset the Current Distance Variable --------
Set Variable Set MDG_CurDistance[MDG_MaxIndex] = "0.00"
-------- Reset the Current Counter Variable --------
Set Variable Set MDG_Counter[MDG_MaxIndex] = "0.00"
-------- Setup the stage --------
Set Variable Set MDG_Stage[MDG_MaxIndex] = "1"
-------- Create a missile dummy --------
Unit - Create 1 . MDG_MDummy for MDG_Player[MDG_MaxIndex] at MDG_Loc[3] facing MDG_Angle[MDG_MaxIndex] degrees
Set Variable Set MDG_Missile[MDG_MaxIndex] = (Last created unit)
-------- Create a group to filter enemy units that have been damaged --------
Custom script: if udg_MDG_UndamagedGroup[udg_MDG_MaxIndex] == null then
Custom script: set udg_MDG_UndamagedGroup[udg_MDG_MaxIndex] = CreateGroup()
Custom script: endif
Custom script: if udg_MDG_UndamagedGroup2[udg_MDG_MaxIndex] == null then
Custom script: set udg_MDG_UndamagedGroup2[udg_MDG_MaxIndex] = CreateGroup()
Custom script: endif
-------- - --------
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MDG_MaxIndex Equal to 1
Then - Actions
Trigger - Turn on MDG_Loop <gen>
Else - Actions
-------- - --------
Custom script: call RemoveLocation(udg_MDG_Loc[1])
Custom script: call RemoveLocation(udg_MDG_Loc[2])
Custom script: call RemoveLocation(udg_MDG_Loc[3])
MDG Loop
Events
Conditions
Actions
For each (Integer MDG_CurIndex ) from 1 to MDG_MaxIndex , do (Actions)
Loop - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MDG_Stage[MDG_CurIndex] Equal to 1
Then - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MDG_CurDistance[MDG_CurIndex] Greater than or equal to MDG_MaxDistance[MDG_Level[MDG_CurIndex]]
Then - Actions
Set Variable Set MDG_Loc[1] = (Position of MDG_Missile[MDG_CurIndex])
-------- Kill Missile Dummy --------
Unit - Kill MDG_Missile[MDG_CurIndex]
-------- Create a SFX Dummy --------
Unit - Create 1 . MDG_SDummy for MDG_Player[MDG_CurIndex] at MDG_Loc[1] facing MDG_Angle[MDG_CurIndex] degrees
Set Variable Set MDG_SFXDummy[MDG_CurIndex] = (Last created unit)
Special Effect - Create a special effect at MDG_Loc[1] using MDG_SFX[2]
Set Variable Set MDG_Effect2[MDG_CurIndex] = (Last created special effect)
-------- Proceed to the next stage --------
Set Variable Set MDG_Stage[MDG_CurIndex] = "2"
-------- - --------
Custom script: call RemoveLocation(udg_MDG_Loc[1])
Else - Actions
-------- Setup missile position --------
Set Variable Set MDG_Loc[1] = (Position of MDG_Missile[MDG_CurIndex])
Set Variable Set MDG_Loc[2] = (MDG_Loc[1] offset by MDG_Speed[MDG_CurIndex] towards MDG_Angle[MDG_CurIndex] degrees.)
-------- Move the projectile --------
Custom script: call SetUnitX(udg_MDG_Missile[udg_MDG_CurIndex], GetLocationX(udg_MDG_Loc[2]))
Custom script: call SetUnitY(udg_MDG_Missile[udg_MDG_CurIndex], GetLocationY(udg_MDG_Loc[2]))
-------- Increase the Current Distance Variable --------
Set Variable Set MDG_CurDistance[MDG_CurIndex] = (MDG_CurDistance[MDG_CurIndex] + MDG_Speed[MDG_CurIndex])
-------- Loop through units within range --------
Set Variable Set MDG_DamagedGroup[MDG_CurIndex] = (Units within MDG_AoE[MDG_Level[MDG_CurIndex]] of MDG_Loc[1].)
Unit Group - Pick every unit in MDG_DamagedGroup[MDG_CurIndex] and do (Actions)
Loop - Actions
-------- Filter --------
Set Variable Set MDG_TempUnit = (Picked unit)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(MDG_TempUnit is A structure) Equal to False
(MDG_TempUnit belongs to an enemy of MDG_Player[MDG_CurIndex].) Equal to True
(MDG_TempUnit is alive) Equal to True
(MDG_TempUnit is Magic Immune) Equal to False
(MDG_TempUnit is in MDG_UndamagedGroup[MDG_CurIndex].) Equal to False
Then - Actions
-------- Deals damage --------
Unit - Cause MDG_Caster[MDG_CurIndex] to damage MDG_TempUnit , dealing MDG_Damage[MDG_Level[MDG_CurIndex]] damage of attack type MDG_AttackType and damage type MDG_DamageType
-------- Create a special effect on enemy units --------
Special Effect - Create a special effect attached to the MDG_Attachment[1] of MDG_TempUnit using MDG_SFX[1]
Set Variable Set MDG_Effect[MDG_CurIndex] = (Last created special effect)
Special Effect - Destroy MDG_Effect[MDG_CurIndex]
-------- Order Caster Dummy to cast slow --------
Unit - Order MDG_DummyCast to Human Sorceress - Slow . MDG_TempUnit
-------- Add them to undamaged group to prevent getting damaged twice --------
Unit Group - Add MDG_TempUnit to MDG_UndamagedGroup[MDG_CurIndex]
Else - Actions
-------- - --------
Custom script: call RemoveLocation(udg_MDG_Loc[1])
Custom script: call RemoveLocation(udg_MDG_Loc[2])
Custom script: call DestroyGroup(udg_MDG_DamagedGroup[udg_MDG_CurIndex])
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MDG_Stage[MDG_CurIndex] Equal to 2
Then - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MDG_Counter[MDG_CurIndex] Greater than or equal to MDG_Duration[MDG_Level[MDG_CurIndex]]
Then - Actions
Set Variable Set MDG_Loc[1] = (Position of MDG_SFXDummy[MDG_CurIndex])
Set Variable Set MDG_Loc[2] = (Position of MDG_Caster[MDG_CurIndex])
-------- Kill the Dummies --------
Unit - Kill MDG_SFXDummy[MDG_CurIndex]
Special Effect - Destroy MDG_Effect2[MDG_CurIndex]
-------- Setup a new angle --------
Set Variable Set MDG_Angle[MDG_CurIndex] = (Angle from MDG_Loc[1] to MDG_Loc[2])
-------- Create a new missile dummy --------
Unit - Create 1 . MDG_MDummy for MDG_Player[MDG_CurIndex] at MDG_Loc[1] facing MDG_Angle[MDG_CurIndex] degrees
Set Variable Set MDG_Missile2[MDG_CurIndex] = (Last created unit)
-------- Reset the Current Distance Variable to Distance between Caster and Dummy --------
Set Variable Set MDG_CurDistance[MDG_CurIndex] = (Distance between MDG_Loc[1] and MDG_Loc[2])
-------- Proceed to the next stage --------
Set Variable Set MDG_Stage[MDG_CurIndex] = "3"
-------- - --------
Custom script: call RemoveLocation(udg_MDG_Loc[1])
Custom script: call RemoveLocation(udg_MDG_Loc[2])
Else - Actions
Set Variable Set MDG_Counter[MDG_CurIndex] = (MDG_Counter[MDG_CurIndex] + 0.03)
Else - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MDG_Stage[MDG_CurIndex] Equal to 3
Then - Actions
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MDG_CurDistance[MDG_CurIndex] Less than or equal to 100.00
Then - Actions
-------- Kill the Dummy --------
Unit - Kill MDG_Missile2[MDG_CurIndex]
-------- De-Index --------
Set Variable Set MDG_Caster[MDG_CurIndex] = MDG_Caster[MDG_MaxIndex]
Set Variable Set MDG_Caster[MDG_MaxIndex] = No unit
Set Variable Set MDG_Angle[MDG_CurIndex] = MDG_Angle[MDG_MaxIndex]
Set Variable Set MDG_Angle2[MDG_CurIndex] = MDG_Angle2[MDG_MaxIndex]
Set Variable Set MDG_Counter[MDG_CurIndex] = MDG_Counter[MDG_MaxIndex]
Set Variable Set MDG_CurDistance[MDG_CurIndex] = MDG_CurDistance[MDG_MaxIndex]
Set Variable Set MDG_DamagedGroup[MDG_CurIndex] = MDG_DamagedGroup[MDG_MaxIndex]
Custom script: call DestroyGroup(udg_MDG_DamagedGroup[udg_MDG_MaxIndex])
Custom script: set udg_MDG_DamagedGroup[udg_MDG_MaxIndex] = null
Set Variable Set MDG_DamagedGroup2[MDG_CurIndex] = MDG_DamagedGroup2[MDG_MaxIndex]
Custom script: call DestroyGroup(udg_MDG_DamagedGroup2[udg_MDG_MaxIndex])
Custom script: set udg_MDG_DamagedGroup2[udg_MDG_MaxIndex] = null
Set Variable Set MDG_UndamagedGroup[MDG_CurIndex] = MDG_UndamagedGroup[MDG_MaxIndex]
Custom script: call DestroyGroup(udg_MDG_UndamagedGroup[udg_MDG_MaxIndex])
Custom script: set udg_MDG_UndamagedGroup[udg_MDG_MaxIndex] = null
Set Variable Set MDG_UndamagedGroup2[MDG_CurIndex] = MDG_UndamagedGroup2[MDG_MaxIndex]
Custom script: call DestroyGroup(udg_MDG_UndamagedGroup2[udg_MDG_MaxIndex])
Custom script: set udg_MDG_UndamagedGroup2[udg_MDG_MaxIndex] = null
Set Variable Set MDG_Effect[MDG_CurIndex] = MDG_Effect[MDG_MaxIndex]
Set Variable Set MDG_Effect2[MDG_CurIndex] = MDG_Effect2[MDG_MaxIndex]
Set Variable Set MDG_Level[MDG_CurIndex] = MDG_Level[MDG_MaxIndex]
Set Variable Set MDG_Missile[MDG_CurIndex] = MDG_Missile[MDG_MaxIndex]
Set Variable Set MDG_Missile[MDG_MaxIndex] = No unit
Set Variable Set MDG_Missile2[MDG_CurIndex] = MDG_Missile2[MDG_MaxIndex]
Set Variable Set MDG_Missile2[MDG_MaxIndex] = No unit
Set Variable Set MDG_Player[MDG_CurIndex] = MDG_Player[MDG_MaxIndex]
Set Variable Set MDG_SFXDummy[MDG_CurIndex] = MDG_SFXDummy[MDG_MaxIndex]
Set Variable Set MDG_SFXDummy[MDG_MaxIndex] = No unit
Set Variable Set MDG_Stage[MDG_CurIndex] = MDG_Stage[MDG_MaxIndex]
Set Variable Set MDG_CurIndex = (MDG_CurIndex - 1)
Set Variable Set MDG_MaxIndex = (MDG_MaxIndex - 1)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
MDG_MaxIndex Equal to 0
Then - Actions
Trigger - Turn off (This trigger)
Else - Actions
-------- - --------
Else - Actions
-------- Setup missile position --------
Set Variable Set MDG_Loc[1] = (Position of MDG_Missile2[MDG_CurIndex])
Set Variable Set MDG_Loc[2] = (Position of MDG_Caster[MDG_CurIndex])
-------- Keep track of the angle --------
Set Variable Set MDG_Angle[MDG_CurIndex] = (Angle from MDG_Loc[1] to MDG_Loc[2])
Set Variable Set MDG_Loc[3] = (MDG_Loc[1] offset by MDG_Speed[MDG_CurIndex] towards MDG_Angle[MDG_CurIndex] degrees.)
-------- Move the projectile --------
Custom script: call SetUnitX(udg_MDG_Missile2[udg_MDG_CurIndex], GetLocationX(udg_MDG_Loc[3]))
Custom script: call SetUnitY(udg_MDG_Missile2[udg_MDG_CurIndex], GetLocationY(udg_MDG_Loc[3]))
-------- Keep track between Caster and Dummy's distance --------
Set Variable Set MDG_CurDistance[MDG_CurIndex] = (Distance between MDG_Loc[1] and MDG_Loc[2])
-------- Loop through units within range --------
Set Variable Set MDG_DamagedGroup2[MDG_CurIndex] = (Units within MDG_AoE[MDG_Level[MDG_CurIndex]] of MDG_Loc[1].)
Unit Group - Pick every unit in MDG_DamagedGroup2[MDG_CurIndex] and do (Actions)
Loop - Actions
-------- Filter --------
Set Variable Set MDG_TempUnit = (Picked unit)
If (All Conditions are True) then do (Then Actions) else do (Else Actions)
If - Conditions
(MDG_TempUnit is A structure) Equal to False
(MDG_TempUnit belongs to an enemy of MDG_Player[MDG_CurIndex].) Equal to True
(MDG_TempUnit is alive) Equal to True
(MDG_TempUnit is Magic Immune) Equal to False
(MDG_TempUnit is in MDG_UndamagedGroup2[MDG_CurIndex].) Equal to False
Then - Actions
-------- Deals damage --------
Unit - Cause MDG_Caster[MDG_CurIndex] to damage MDG_TempUnit , dealing MDG_2ndDamage[MDG_Level[MDG_CurIndex]] damage of attack type MDG_AttackType and damage type MDG_DamageType
-------- Create a special effect on enemy units --------
Special Effect - Create a special effect attached to the chest (Unexpected type: 'attachpoint') of MDG_TempUnit using MDG_SFX[1]
Set Variable Set MDG_Effect[MDG_CurIndex] = (Last created special effect)
Special Effect - Destroy MDG_Effect[MDG_CurIndex]
-------- Add them to undamaged group to prevent getting damaged twice --------
Unit Group - Add MDG_TempUnit to MDG_UndamagedGroup2[MDG_CurIndex]
Else - Actions
-------- - --------
Custom script: call RemoveLocation(udg_MDG_Loc[1])
Custom script: call RemoveLocation(udg_MDG_Loc[2])
Custom script: call RemoveLocation(udg_MDG_Loc[3])
Custom script: call DestroyGroup(udg_MDG_DamagedGroup2[udg_MDG_CurIndex])
Else - Actions
Top