• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

How to import Leshrac (DotA2)

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Leshrac (DotA2) of the bundle Leshrac (DotA2). Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Leshrac (DotA2).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Leshrac (DotA2)
Leshrac.mdx
Leshrac_Body.blp
Leshrac_Armor.blp
Leshrac_Horns.blp
Leshrac_Tail.blp
Leshrac_Vine.blp

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Leshrac.mdx

Now Click the "Import File" Button:

Next select 'Leshrac.mdx' in the folder which you extracted from the zip archive:

Leshrac (DotA2)
Leshrac.mdx
Leshrac_Armor.blp
Leshrac_Body.blp
Leshrac_Horns.blp
Leshrac_Tail.blp
Leshrac_Vine.blp

The file has been properly added to the map archive:

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx

Done, you have imported the file Leshrac.mdx.

Importing Leshrac_Armor.blp

Now Click the "Import File" Button:

Next select 'Leshrac_Armor.blp' in the folder which you extracted from the zip archive:

Leshrac (DotA2)
Leshrac.mdx
Leshrac_Armor.blp
Leshrac_Body.blp
Leshrac_Horns.blp
Leshrac_Tail.blp
Leshrac_Vine.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
war3mapimported/Leshrac_Armor.blp

Double-click the file Leshrac_Armor.blp:

Leshrac_Armor.blp
Image / Texture
167
war3mapimported/Leshrac_Armor.blp

Tick the box "Use Custom Path" and type in the correct path:

Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp

The file has been properly added to the map archive:

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp

Done, you have imported the file Leshrac_Armor.blp.

Importing Leshrac_Body.blp

Now Click the "Import File" Button:

Next select 'Leshrac_Body.blp' in the folder which you extracted from the zip archive:

Leshrac (DotA2)
Leshrac.mdx
Leshrac_Armor.blp
Leshrac_Body.blp
Leshrac_Horns.blp
Leshrac_Tail.blp
Leshrac_Vine.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp
Leshrac_Body.blp
Image / Texture
682
war3mapimported/Leshrac_Body.blp

Double-click the file Leshrac_Body.blp:

Leshrac_Body.blp
Image / Texture
682
war3mapimported/Leshrac_Body.blp

Tick the box "Use Custom Path" and type in the correct path:

Leshrac_Body.blp
Image / Texture
682
Leshrac_Body.blp

The file has been properly added to the map archive:

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp
Leshrac_Body.blp
Image / Texture
682
Leshrac_Body.blp

Done, you have imported the file Leshrac_Body.blp.

Importing Leshrac_Horns.blp

Now Click the "Import File" Button:

Next select 'Leshrac_Horns.blp' in the folder which you extracted from the zip archive:

Leshrac (DotA2)
Leshrac.mdx
Leshrac_Armor.blp
Leshrac_Body.blp
Leshrac_Horns.blp
Leshrac_Tail.blp
Leshrac_Vine.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp
Leshrac_Body.blp
Image / Texture
682
Leshrac_Body.blp
Leshrac_Horns.blp
Image / Texture
152
war3mapimported/Leshrac_Horns.blp

Double-click the file Leshrac_Horns.blp:

Leshrac_Horns.blp
Image / Texture
152
war3mapimported/Leshrac_Horns.blp

Tick the box "Use Custom Path" and type in the correct path:

Leshrac_Horns.blp
Image / Texture
152
Leshrac_Horns.blp

The file has been properly added to the map archive:

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp
Leshrac_Body.blp
Image / Texture
682
Leshrac_Body.blp
Leshrac_Horns.blp
Image / Texture
152
Leshrac_Horns.blp

Done, you have imported the file Leshrac_Horns.blp.

Importing Leshrac_Tail.blp

Now Click the "Import File" Button:

Next select 'Leshrac_Tail.blp' in the folder which you extracted from the zip archive:

Leshrac (DotA2)
Leshrac.mdx
Leshrac_Armor.blp
Leshrac_Body.blp
Leshrac_Horns.blp
Leshrac_Tail.blp
Leshrac_Vine.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp
Leshrac_Body.blp
Image / Texture
682
Leshrac_Body.blp
Leshrac_Horns.blp
Image / Texture
152
Leshrac_Horns.blp
Leshrac_Tail.blp
Image / Texture
95
war3mapimported/Leshrac_Tail.blp

Double-click the file Leshrac_Tail.blp:

Leshrac_Tail.blp
Image / Texture
95
war3mapimported/Leshrac_Tail.blp

Tick the box "Use Custom Path" and type in the correct path:

Leshrac_Tail.blp
Image / Texture
95
Leshrac_Tail.blp

The file has been properly added to the map archive:

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp
Leshrac_Body.blp
Image / Texture
682
Leshrac_Body.blp
Leshrac_Horns.blp
Image / Texture
152
Leshrac_Horns.blp
Leshrac_Tail.blp
Image / Texture
95
Leshrac_Tail.blp

Done, you have imported the file Leshrac_Tail.blp.

Importing Leshrac_Vine.blp

Now Click the "Import File" Button:

Next select 'Leshrac_Vine.blp' in the folder which you extracted from the zip archive:

Leshrac (DotA2)
Leshrac.mdx
Leshrac_Armor.blp
Leshrac_Body.blp
Leshrac_Horns.blp
Leshrac_Tail.blp
Leshrac_Vine.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp
Leshrac_Body.blp
Image / Texture
682
Leshrac_Body.blp
Leshrac_Horns.blp
Image / Texture
152
Leshrac_Horns.blp
Leshrac_Tail.blp
Image / Texture
95
Leshrac_Tail.blp
Leshrac_Vine.blp
Image / Texture
158
war3mapimported/Leshrac_Vine.blp

Double-click the file Leshrac_Vine.blp:

Leshrac_Vine.blp
Image / Texture
158
war3mapimported/Leshrac_Vine.blp

Tick the box "Use Custom Path" and type in the correct path:

Leshrac_Vine.blp
Image / Texture
158
Leshrac_Vine.blp

The file has been properly added to the map archive:

Leshrac.mdx
Model
1,247
war3mapimported/Leshrac.mdx
Leshrac_Armor.blp
Image / Texture
167
Leshrac_Armor.blp
Leshrac_Body.blp
Image / Texture
682
Leshrac_Body.blp
Leshrac_Horns.blp
Image / Texture
152
Leshrac_Horns.blp
Leshrac_Tail.blp
Image / Texture
95
Leshrac_Tail.blp
Leshrac_Vine.blp
Image / Texture
158
Leshrac_Vine.blp

Done, you have imported the file Leshrac_Vine.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

  • Link to the model and the tutorial
  • Precise description of what does not work
  • The map you tried to import it to (with the model imported)
And we will do what we can to help you.
Top