How to import Lady Blaumeux WoW Rip

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Lady Blaumeux WoW Rip of the bundle Lady Blaumeux WoW Rip. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Lady Blaumeux WoW Rip.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Lady_Blaumeux.mdx

Now Click the "Import File" Button:

Next select 'Lady_Blaumeux.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file Lady_Blaumeux.mdx.

Importing Axe_1H_Stratholme_D_01_Texture.blp

Now Click the "Import File" Button:

Next select 'Axe_1H_Stratholme_D_01_Texture.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Axe_1H_Stratholme_D_01_Texture.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Axe_1H_Stratholme_D_01_Texture.blp.

Importing dust1.blp

Now Click the "Import File" Button:

Next select 'dust1.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file dust1.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file dust1.blp.

Importing FlameLickSmall.blp

Now Click the "Import File" Button:

Next select 'FlameLickSmall.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FlameLickSmall.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FlameLickSmall.blp.

Importing MountedDeathKnightDarkBlueBlack_01.blp

Now Click the "Import File" Button:

Next select 'MountedDeathKnightDarkBlueBlack_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file MountedDeathKnightDarkBlueBlack_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file MountedDeathKnightDarkBlueBlack_01.blp.

Importing MountedDeathKnightDarkBlueBlack_02.blp

Now Click the "Import File" Button:

Next select 'MountedDeathKnightDarkBlueBlack_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file MountedDeathKnightDarkBlueBlack_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file MountedDeathKnightDarkBlueBlack_02.blp.

Importing MountedDeathKnightDarkBlueBlack_03.blp

Now Click the "Import File" Button:

Next select 'MountedDeathKnightDarkBlueBlack_03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file MountedDeathKnightDarkBlueBlack_03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file MountedDeathKnightDarkBlueBlack_03.blp.

Importing SMOKE02_FLIP.blp

Now Click the "Import File" Button:

Next select 'SMOKE02_FLIP.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file SMOKE02_FLIP.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file SMOKE02_FLIP.blp.

Importing SMOKE02A.blp

Now Click the "Import File" Button:

Next select 'SMOKE02A.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file SMOKE02A.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file SMOKE02A.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: