How to import Kael'thas Death Knight

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Kael'thas Death Knight of the bundle Kael'thas Death Knight. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Kaelthas Death Knight.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing kael_DeathKnight_Vanilla.mdx

Now Click the "Import File" Button:

Next select 'kael_DeathKnight_Vanilla.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file kael_DeathKnight_Vanilla.mdx.

Importing Human_KaelThas_Alter_Main_two_Normal.DDS

Now Click the "Import File" Button:

Next select 'Human_KaelThas_Alter_Main_two_Normal.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_KaelThas_Alter_Main_two_Normal.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_KaelThas_Alter_Main_two_Normal.DDS.

Importing Human_KaelThas_Alter_Main_two_Orm.DDS

Now Click the "Import File" Button:

Next select 'Human_KaelThas_Alter_Main_two_Orm.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Human_KaelThas_Alter_Main_two_Orm.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Human_KaelThas_Alter_Main_two_Orm.DDS.

Importing human_kaelthas_main_emissive.dds

Now Click the "Import File" Button:

Next select 'human_kaelthas_main_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file human_kaelthas_main_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file human_kaelthas_main_emissive.dds.

Importing Undead_FallenKael_DK_Hair_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Hair_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Hair_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Hair_Diffuse.DDS.

Importing Undead_FallenKael_DK_Main_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_Diffuse.DDS.

Importing Undead_FallenKael_DK_Main_eith_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_eith_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_eith_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_eith_Diffuse.DDS.

Importing Undead_FallenKael_DK_Main_Five_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_Five_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_Five_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_Five_Diffuse.DDS.

Importing Undead_FallenKael_DK_Main_Forth_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_Forth_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_Forth_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_Forth_Diffuse.DDS.

Importing Undead_FallenKael_DK_Main_Forth_Emissive.dds

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_Forth_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_Forth_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_Forth_Emissive.dds.

Importing Undead_FallenKael_DK_Main_sevent_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_sevent_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_sevent_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_sevent_Diffuse.dds.

Importing Undead_FallenKael_DK_Main_Six_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_Six_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_Six_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_Six_Diffuse.dds.

Importing Undead_FallenKael_DK_Main_Six_Emissive.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_Six_Emissive.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_Six_Emissive.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_Six_Emissive.DDS.

Importing Undead_FallenKael_DK_Main_Third_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_Third_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_Third_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_Third_Diffuse.DDS.

Importing Undead_FallenKael_DK_Main_Two_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Main_Two_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Main_Two_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Main_Two_Diffuse.DDS.

Importing Undead_FallenKael_DK_Pauldron_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Pauldron_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Pauldron_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Pauldron_Diffuse.DDS.

Importing Undead_FallenKael_DK_Pauldron_Emissive.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Pauldron_Emissive.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Pauldron_Emissive.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Pauldron_Emissive.DDS.

Importing Undead_FallenKael_DK_Pauldron_Fourth_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Pauldron_Fourth_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Pauldron_Fourth_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Pauldron_Fourth_Diffuse.DDS.

Importing Undead_FallenKael_DK_Pauldron_Fur_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Pauldron_Fur_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Pauldron_Fur_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Pauldron_Fur_Diffuse.dds.

Importing Undead_FallenKael_DK_Pauldron_thri_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Pauldron_thri_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Pauldron_thri_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Pauldron_thri_Diffuse.DDS.

Importing Undead_FallenKael_DK_Pauldron_thri_Orm.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Pauldron_thri_Orm.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Pauldron_thri_Orm.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Pauldron_thri_Orm.DDS.

Importing Undead_FallenKael_DK_Pauldron_two_Diffuse.dds

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_Pauldron_two_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_Pauldron_two_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_Pauldron_two_Diffuse.dds.

Importing Undead_FallenKael_DK_tpr_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_tpr_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_tpr_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_tpr_Diffuse.DDS.

Importing Undead_FallenKael_DK_v1_Main_Emissive.dds

Now Click the "Import File" Button:

Next select 'Undead_FallenKael_DK_v1_Main_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_FallenKael_DK_v1_Main_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_FallenKael_DK_v1_Main_Emissive.dds.

Importing Undead_KaelEvil_Cape_Diffuse.DDS

Now Click the "Import File" Button:

Next select 'Undead_KaelEvil_Cape_Diffuse.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_KaelEvil_Cape_Diffuse.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_KaelEvil_Cape_Diffuse.DDS.

Importing Undead_KaelEvil_Cape_Normal.DDS

Now Click the "Import File" Button:

Next select 'Undead_KaelEvil_Cape_Normal.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_KaelEvil_Cape_Normal.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_KaelEvil_Cape_Normal.DDS.

Importing Undead_KaelEvil_Cape_Orm.DDS

Now Click the "Import File" Button:

Next select 'Undead_KaelEvil_Cape_Orm.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_KaelEvil_Cape_Orm.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_KaelEvil_Cape_Orm.DDS.

Importing Undead_LichKingCinematic_Glow_ORM.DDS

Now Click the "Import File" Button:

Next select 'Undead_LichKingCinematic_Glow_ORM.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_LichKingCinematic_Glow_ORM.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_LichKingCinematic_Glow_ORM.DDS.

Importing Undead_LichKingCinematic_Main_Emissive.dds

Now Click the "Import File" Button:

Next select 'Undead_LichKingCinematic_Main_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_LichKingCinematic_Main_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_LichKingCinematic_Main_Emissive.dds.

Importing Undead_LichKingCinematic_Main_Normal.DDS

Now Click the "Import File" Button:

Next select 'Undead_LichKingCinematic_Main_Normal.DDS' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Undead_LichKingCinematic_Main_Normal.DDS:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Undead_LichKingCinematic_Main_Normal.DDS.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.