How to import Horde garrison trading post + Doodads set.

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Horde garrison trading post + Doodads set. of the bundle Horde garrison trading post + Doodads set.. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Horde garrison trading post Doodads set..zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing 6or_garrison_leatherworkingrank3.mdx

Now Click the "Import File" Button:

Next select '6or_garrison_leatherworkingrank3.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_leatherworkingrank3.mdx.

Importing 6hu_leatherworking_head01.blp

Now Click the "Import File" Button:

Next select '6hu_leatherworking_head01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_leatherworking_head01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_leatherworking_head01.blp.

Importing 6hu_leatherworking_skin01.blp

Now Click the "Import File" Button:

Next select '6hu_leatherworking_skin01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_leatherworking_skin01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_leatherworking_skin01.blp.

Importing 6hu_leatherworking_skin02.blp

Now Click the "Import File" Button:

Next select '6hu_leatherworking_skin02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6hu_leatherworking_skin02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6hu_leatherworking_skin02.blp.

Importing 6ih_ironhorde_grapplinghook01.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_grapplinghook01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_grapplinghook01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_grapplinghook01.blp.

Importing 6ih_ironhorde_torch01.blp

Now Click the "Import File" Button:

Next select '6ih_ironhorde_torch01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6ih_ironhorde_torch01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6ih_ironhorde_torch01.blp.

Importing 6oc_orcclans_barrel01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_barrel01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_barrel01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_barrel01.blp.

Importing 6oc_orcclans_candles01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_candles01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_candles01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_candles01.blp.

Importing 6oc_orcclans_crate01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_crate01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_crate01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_crate01.blp.

Importing 6oc_orcclans_leatherbags01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_leatherbags01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_leatherbags01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_leatherbags01.blp.

Importing 6oc_orcclans_leatherstuff01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_leatherstuff01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_leatherstuff01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_leatherstuff01.blp.

Importing 6oc_orcclans_saddle01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_saddle01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_saddle01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_saddle01.blp.

Importing 6oc_orcclans_saddlerack01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_saddlerack01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_saddlerack01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_saddlerack01.blp.

Importing 6oc_orcclans_tools01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_tools01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_tools01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_tools01.blp.

Importing 6oc_orcclans_wineskin01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_wineskin01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_wineskin01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_wineskin01.blp.

Importing 6oc_orcclans_woodworking01.blp

Now Click the "Import File" Button:

Next select '6oc_orcclans_woodworking01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6oc_orcclans_woodworking01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6oc_orcclans_woodworking01.blp.

Importing 6og_ogre_rugs_01.blp

Now Click the "Import File" Button:

Next select '6og_ogre_rugs_01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6og_ogre_rugs_01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6og_ogre_rugs_01.blp.

Importing 6og_ogre_rugs_02.blp

Now Click the "Import File" Button:

Next select '6og_ogre_rugs_02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6og_ogre_rugs_02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6og_ogre_rugs_02.blp.

Importing 6or_alchemy_extras.blp

Now Click the "Import File" Button:

Next select '6or_alchemy_extras.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_alchemy_extras.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_alchemy_extras.blp.

Importing 6or_garrison_blackiron.blp

Now Click the "Import File" Button:

Next select '6or_garrison_blackiron.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_blackiron.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_blackiron.blp.

Importing 6or_garrison_hub_texture1.blp

Now Click the "Import File" Button:

Next select '6or_garrison_hub_texture1.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_hub_texture1.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_hub_texture1.blp.

Importing 6or_garrison_hub_texture4.blp

Now Click the "Import File" Button:

Next select '6or_garrison_hub_texture4.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_hub_texture4.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_hub_texture4.blp.

Importing 6or_garrison_hub_texture6.blp

Now Click the "Import File" Button:

Next select '6or_garrison_hub_texture6.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_hub_texture6.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_hub_texture6.blp.

Importing 6or_garrison_leatherworking_texture1.blp

Now Click the "Import File" Button:

Next select '6or_garrison_leatherworking_texture1.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_leatherworking_texture1.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_leatherworking_texture1.blp.

Importing 6or_garrison_leatherworking_texture2.blp

Now Click the "Import File" Button:

Next select '6or_garrison_leatherworking_texture2.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_leatherworking_texture2.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_leatherworking_texture2.blp.

Importing 6or_garrison_leatherworking_texture3.blp

Now Click the "Import File" Button:

Next select '6or_garrison_leatherworking_texture3.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_leatherworking_texture3.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_leatherworking_texture3.blp.

Importing 6or_garrison_leatherworking_texture4.blp

Now Click the "Import File" Button:

Next select '6or_garrison_leatherworking_texture4.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_leatherworking_texture4.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_leatherworking_texture4.blp.

Importing 6or_garrison_leatherworking_texture5.blp

Now Click the "Import File" Button:

Next select '6or_garrison_leatherworking_texture5.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_leatherworking_texture5.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_leatherworking_texture5.blp.

Importing 6or_garrison_rope.blp

Now Click the "Import File" Button:

Next select '6or_garrison_rope.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_rope.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_rope.blp.

Importing 6or_garrison_shelfextras.blp

Now Click the "Import File" Button:

Next select '6or_garrison_shelfextras.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_shelfextras.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_shelfextras.blp.

Importing 6or_garrison_tables.blp

Now Click the "Import File" Button:

Next select '6or_garrison_tables.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_garrison_tables.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_garrison_tables.blp.

Importing 6or_inscription_bookstack01.blp

Now Click the "Import File" Button:

Next select '6or_inscription_bookstack01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_inscription_bookstack01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_inscription_bookstack01.blp.

Importing 6or_inscription_bookstack02.blp

Now Click the "Import File" Button:

Next select '6or_inscription_bookstack02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_inscription_bookstack02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_inscription_bookstack02.blp.

Importing 6or_inscription_bookstack04.blp

Now Click the "Import File" Button:

Next select '6or_inscription_bookstack04.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_inscription_bookstack04.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_inscription_bookstack04.blp.

Importing 6or_inscription_doodads.blp

Now Click the "Import File" Button:

Next select '6or_inscription_doodads.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_inscription_doodads.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_inscription_doodads.blp.

Importing 6or_inscription_papers01.blp

Now Click the "Import File" Button:

Next select '6or_inscription_papers01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_inscription_papers01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_inscription_papers01.blp.

Importing 6or_leatherworking_extras01.blp

Now Click the "Import File" Button:

Next select '6or_leatherworking_extras01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_leatherworking_extras01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_leatherworking_extras01.blp.

Importing 6or_leatherworking_extras02.blp

Now Click the "Import File" Button:

Next select '6or_leatherworking_extras02.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_leatherworking_extras02.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_leatherworking_extras02.blp.

Importing 6or_leatherworking_extras03.blp

Now Click the "Import File" Button:

Next select '6or_leatherworking_extras03.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_leatherworking_extras03.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_leatherworking_extras03.blp.

Importing 6or_stone_floor01.blp

Now Click the "Import File" Button:

Next select '6or_stone_floor01.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6or_stone_floor01.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6or_stone_floor01.blp.

Importing 6sm_dirt01_512_h.blp

Now Click the "Import File" Button:

Next select '6sm_dirt01_512_h.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file 6sm_dirt01_512_h.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file 6sm_dirt01_512_h.blp.

Importing hordepvpmountarmorred.blp

Now Click the "Import File" Button:

Next select 'hordepvpmountarmorred.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file hordepvpmountarmorred.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file hordepvpmountarmorred.blp.

Importing pr_refuge_chain.blp

Now Click the "Import File" Button:

Next select 'pr_refuge_chain.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file pr_refuge_chain.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file pr_refuge_chain.blp.

Importing shoveltuskbrown.blp

Now Click the "Import File" Button:

Next select 'shoveltuskbrown.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file shoveltuskbrown.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file shoveltuskbrown.blp.

Importing t_bedextras.blp

Now Click the "Import File" Button:

Next select 't_bedextras.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file t_bedextras.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file t_bedextras.blp.

Importing t_tableextras.blp

Now Click the "Import File" Button:

Next select 't_tableextras.blp' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file t_tableextras.blp:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file t_tableextras.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.