How to import High Elven Knight

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model High Elven Knight of the bundle High Elven Knight. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Elven Knights (AoW).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing High_Elven_ Knight.mdx

Now Click the "Import File" Button:

Next select 'High_Elven_ Knight.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file High_Elven_ Knight.mdx.

Importing High_Elf_Knight_Buckle_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Buckle_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Buckle_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Buckle_Diffuse.dds.

Importing High_Elf_Knight_Buckle_Emissive.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Buckle_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Buckle_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Buckle_Emissive.dds.

Importing High_Elf_Knight_Buckle_Normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Buckle_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Buckle_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Buckle_Normal.dds.

Importing High_Elf_Knight_Buckle_Orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Buckle_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Buckle_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Buckle_Orm.dds.

Importing High_Elf_Knight_Clothes_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Clothes_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Clothes_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Clothes_Diffuse.dds.

Importing High_Elf_Knight_Clothes_Normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Clothes_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Clothes_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Clothes_Normal.dds.

Importing High_Elf_Knight_Clothes_Orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Clothes_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Clothes_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Clothes_Orm.dds.

Importing High_Elf_Knight_Helmet_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Helmet_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Helmet_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Helmet_Diffuse.dds.

Importing High_Elf_Knight_Helmet_Emissive.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Helmet_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Helmet_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Helmet_Emissive.dds.

Importing High_Elf_Knight_Helmet_Normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Helmet_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Helmet_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Helmet_Normal.dds.

Importing High_Elf_Knight_Helmet_Orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Helmet_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Helmet_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Helmet_Orm.dds.

Importing High_Elf_Knight_Horse_Armor_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Horse_Armor_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Horse_Armor_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Horse_Armor_Diffuse.dds.

Importing High_Elf_Knight_Horse_Armor_Emissive.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Horse_Armor_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Horse_Armor_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Horse_Armor_Emissive.dds.

Importing High_Elf_Knight_Horse_armor_Normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Horse_armor_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Horse_armor_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Horse_armor_Normal.dds.

Importing High_Elf_Knight_Horse_Armor_Orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Horse_Armor_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Horse_Armor_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Horse_Armor_Orm.dds.

Importing High_Elf_Knight_Horse_Main_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Horse_Main_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Horse_Main_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Horse_Main_Diffuse.dds.

Importing High_Elf_Knight_Horse_Main_Emissive.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Horse_Main_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Horse_Main_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Horse_Main_Emissive.dds.

Importing High_Elf_Knight_Horse_Main_Normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Horse_Main_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Horse_Main_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Horse_Main_Normal.dds.

Importing High_Elf_Knight_Horse_Main_Orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Horse_Main_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Horse_Main_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Horse_Main_Orm.dds.

Importing High_Elf_Knight_Main_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Main_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Main_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Main_Diffuse.dds.

Importing High_Elf_Knight_main_emissive.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_main_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_main_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_main_emissive.dds.

Importing High_Elf_Knight_main_normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_main_normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_main_normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_main_normal.dds.

Importing High_Elf_Knight_main_orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_main_orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_main_orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_main_orm.dds.

Importing High_Elf_Knight_Neck_armor_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Neck_armor_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Neck_armor_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Neck_armor_Diffuse.dds.

Importing High_Elf_Knight_Neck_armor_Normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Neck_armor_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Neck_armor_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Neck_armor_Normal.dds.

Importing High_Elf_Knight_Neck_armor_Orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Neck_armor_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Neck_armor_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Neck_armor_Orm.dds.

Importing High_Elf_Knight_Set_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Set_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Set_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Set_Diffuse.dds.

Importing High_Elf_Knight_Set_Emissive.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Set_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Set_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Set_Emissive.dds.

Importing High_Elf_Knight_Set_Normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Set_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Set_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Set_Normal.dds.

Importing High_Elf_Knight_Set_Orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Set_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Set_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Set_Orm.dds.

Importing High_Elf_Knight_Shoulder_Diffuse.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Shoulder_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Shoulder_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Shoulder_Diffuse.dds.

Importing High_Elf_Knight_Shoulder_Emissive.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Shoulder_Emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Shoulder_Emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Shoulder_Emissive.dds.

Importing High_Elf_Knight_Shoulder_Normal.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Shoulder_Normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Shoulder_Normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Shoulder_Normal.dds.

Importing High_Elf_Knight_Shoulder_Orm.dds

Now Click the "Import File" Button:

Next select 'High_Elf_Knight_Shoulder_Orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file High_Elf_Knight_Shoulder_Orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file High_Elf_Knight_Shoulder_Orm.dds.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.