How to import Hammer Doom Guard (Reforged Beta) Portrait

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Hammer Doom Guard (Reforged Beta) Portrait of the bundle Hammer Doom Guard (Reforged Beta) Portrait. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Hammer Doom Guard (Reforged Beta).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing doomguardMace_portrait.mdx

Now Click the "Import File" Button:

Next select 'doomguardMace_portrait.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file doomguardMace_portrait.mdx.

Importing wc3r_beta_doomguard_corpse_diffuse.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_corpse_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_corpse_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_corpse_diffuse.dds.

Importing wc3r_beta_doomguard_corpse_normal.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_corpse_normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_corpse_normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_corpse_normal.dds.

Importing wc3r_beta_doomguard_corpse_orm.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_corpse_orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_corpse_orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_corpse_orm.dds.

Importing wc3r_beta_doomguard_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_main_diffuse.dds.

Importing wc3r_beta_doomguard_main_emissive.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_main_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_main_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_main_emissive.dds.

Importing wc3r_beta_doomguard_main_normal.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_main_normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_main_normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_main_normal.dds.

Importing wc3r_beta_doomguard_main_orm.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_main_orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_main_orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_main_orm.dds.

Importing wc3r_beta_doomguard_weapon_diffuse.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_weapon_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_weapon_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_weapon_diffuse.dds.

Importing wc3r_beta_doomguard_weapon_emissive.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_weapon_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_weapon_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_weapon_emissive.dds.

Importing wc3r_beta_doomguard_weapon_normal.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_weapon_normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_weapon_normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_weapon_normal.dds.

Importing wc3r_beta_doomguard_weapon_orm.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_weapon_orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_weapon_orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_weapon_orm.dds.

Importing wc3r_beta_doomguard_wings_diffuse.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_wings_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_wings_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_wings_diffuse.dds.

Importing wc3r_beta_doomguard_wings_normal.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_wings_normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_wings_normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_wings_normal.dds.

Importing wc3r_beta_doomguard_wings_orm.dds

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard_wings_orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard_wings_orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard_wings_orm.dds.

Importing wc3r_beta_doomguard.facefx

Now Click the "Import File" Button:

Next select 'wc3r_beta_doomguard.facefx' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file wc3r_beta_doomguard.facefx:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file wc3r_beta_doomguard.facefx.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

And we will do what we can to help you.