• Listen to a special audio message from Bill Roper to the Hive Workshop community (Bill is a former Vice President of Blizzard Entertainment, Producer, Designer, Musician, Voice Actor) 🔗Click here to hear his message!
  • Read Evilhog's interview with Gregory Alper, the original composer of the music for WarCraft: Orcs & Humans 🔗Click here to read the full interview.

How to import Feltotem Tauren Melee

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Feltotem Tauren Melee of the bundle Feltotem Tauren Melee. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Feltotem Tauren Pack (WoW).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Feltotem Tauren Melee
FeltotemTauren_Melee.mdx
FeltotemTauren_MeleeBase.blp
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeWeapon.blp

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing FeltotemTauren_Melee.mdx

Now Click the "Import File" Button:

Next select 'FeltotemTauren_Melee.mdx' in the folder which you extracted from the zip archive:

Feltotem Tauren Melee
FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
FeltotemTauren_MeleeWeapon.blp

The file has been properly added to the map archive:

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx

Done, you have imported the file FeltotemTauren_Melee.mdx.

Importing FeltotemTauren_Fel.blp

Now Click the "Import File" Button:

Next select 'FeltotemTauren_Fel.blp' in the folder which you extracted from the zip archive:

Feltotem Tauren Melee
FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
FeltotemTauren_MeleeWeapon.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
Image / Texture
138
war3mapimported/FeltotemTauren_Fel.blp

Double-click the file FeltotemTauren_Fel.blp:

FeltotemTauren_Fel.blp
Image / Texture
138
war3mapimported/FeltotemTauren_Fel.blp

Tick the box "Use Custom Path" and type in the correct path:

FeltotemTauren_Fel.blp
Image / Texture
138
FeltotemTauren_Fel.blp

The file has been properly added to the map archive:

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
Image / Texture
138
FeltotemTauren_Fel.blp

Done, you have imported the file FeltotemTauren_Fel.blp.

Importing FeltotemTauren_MeleeArmor.blp

Now Click the "Import File" Button:

Next select 'FeltotemTauren_MeleeArmor.blp' in the folder which you extracted from the zip archive:

Feltotem Tauren Melee
FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
FeltotemTauren_MeleeWeapon.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
Image / Texture
138
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
Image / Texture
397
war3mapimported/FeltotemTauren_MeleeArmor.blp

Double-click the file FeltotemTauren_MeleeArmor.blp:

FeltotemTauren_MeleeArmor.blp
Image / Texture
397
war3mapimported/FeltotemTauren_MeleeArmor.blp

Tick the box "Use Custom Path" and type in the correct path:

FeltotemTauren_MeleeArmor.blp
Image / Texture
397
FeltotemTauren_MeleeArmor.blp

The file has been properly added to the map archive:

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
Image / Texture
138
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
Image / Texture
397
FeltotemTauren_MeleeArmor.blp

Done, you have imported the file FeltotemTauren_MeleeArmor.blp.

Importing FeltotemTauren_MeleeBase.blp

Now Click the "Import File" Button:

Next select 'FeltotemTauren_MeleeBase.blp' in the folder which you extracted from the zip archive:

Feltotem Tauren Melee
FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
FeltotemTauren_MeleeWeapon.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
Image / Texture
138
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
Image / Texture
397
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
Image / Texture
863
war3mapimported/FeltotemTauren_MeleeBase.blp

Double-click the file FeltotemTauren_MeleeBase.blp:

FeltotemTauren_MeleeBase.blp
Image / Texture
863
war3mapimported/FeltotemTauren_MeleeBase.blp

Tick the box "Use Custom Path" and type in the correct path:

FeltotemTauren_MeleeBase.blp
Image / Texture
863
FeltotemTauren_MeleeBase.blp

The file has been properly added to the map archive:

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
Image / Texture
138
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
Image / Texture
397
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
Image / Texture
863
FeltotemTauren_MeleeBase.blp

Done, you have imported the file FeltotemTauren_MeleeBase.blp.

Importing FeltotemTauren_MeleeWeapon.blp

Now Click the "Import File" Button:

Next select 'FeltotemTauren_MeleeWeapon.blp' in the folder which you extracted from the zip archive:

Feltotem Tauren Melee
FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
FeltotemTauren_MeleeWeapon.blp

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
Image / Texture
138
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
Image / Texture
397
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
Image / Texture
863
FeltotemTauren_MeleeBase.blp
FeltotemTauren_MeleeWeapon.blp
Image / Texture
95
war3mapimported/FeltotemTauren_MeleeWeapon.blp

Double-click the file FeltotemTauren_MeleeWeapon.blp:

FeltotemTauren_MeleeWeapon.blp
Image / Texture
95
war3mapimported/FeltotemTauren_MeleeWeapon.blp

Tick the box "Use Custom Path" and type in the correct path:

FeltotemTauren_MeleeWeapon.blp
Image / Texture
95
FeltotemTauren_MeleeWeapon.blp

The file has been properly added to the map archive:

FeltotemTauren_Melee.mdx
Model
3,589
war3mapimported/FeltotemTauren_Melee.mdx
FeltotemTauren_Fel.blp
Image / Texture
138
FeltotemTauren_Fel.blp
FeltotemTauren_MeleeArmor.blp
Image / Texture
397
FeltotemTauren_MeleeArmor.blp
FeltotemTauren_MeleeBase.blp
Image / Texture
863
FeltotemTauren_MeleeBase.blp
FeltotemTauren_MeleeWeapon.blp
Image / Texture
95
FeltotemTauren_MeleeWeapon.blp

Done, you have imported the file FeltotemTauren_MeleeWeapon.blp.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:

  • Link to the model and the tutorial
  • Precise description of what does not work
  • The map you tried to import it to (with the model imported)
And we will do what we can to help you.
Top