How to import FallenAlexandros Mograine(classic bald one)

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model FallenAlexandros Mograine(classic bald one) of the bundle FallenAlexandros Mograine(classic bald one). Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Alexandros Mograine(Four Horsemen).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing FallenAlexandros Mograine(classic one).mdx

Now Click the "Import File" Button:

Next select 'FallenAlexandros Mograine(classic one).mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros Mograine(classic one).mdx.

Importing ashbringer_handle_diffuse.dds

Now Click the "Import File" Button:

Next select 'ashbringer_handle_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ashbringer_handle_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ashbringer_handle_diffuse.dds.

Importing ashbringer_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'ashbringer_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ashbringer_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ashbringer_main_diffuse.dds.

Importing ashbringer_main_emissive.dds

Now Click the "Import File" Button:

Next select 'ashbringer_main_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file ashbringer_main_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file ashbringer_main_emissive.dds.

Importing FallenAlexandros Mograine_arm_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros Mograine_arm_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros Mograine_arm_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros Mograine_arm_Diffuse.dds.

Importing FallenAlexandros Mograine_beard_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros Mograine_beard_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros Mograine_beard_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros Mograine_beard_Diffuse.dds.

Importing FallenAlexandros Mograine_leg_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros Mograine_leg_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros Mograine_leg_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros Mograine_leg_Diffuse.dds.

Importing FallenAlexandros_Mograine_belt_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_belt_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_belt_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_belt_Diffuse.dds.

Importing FallenAlexandros_Mograine_cape_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_cape_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_cape_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_cape_Diffuse.dds.

Importing FallenAlexandros_Mograine_chest_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_chest_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_chest_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_chest_Diffuse.dds.

Importing FallenAlexandros_Mograine_chestcrest_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_chestcrest_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_chestcrest_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_chestcrest_Diffuse.dds.

Importing FallenAlexandros_Mograine_face_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_face_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_face_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_face_Diffuse.dds.

Importing FallenAlexandros_Mograine_face_emissive.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_face_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_face_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_face_emissive.dds.

Importing FallenAlexandros_Mograine_hair_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_hair_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_hair_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_hair_Diffuse.dds.

Importing FallenAlexandros_Mograine_horse_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_horse_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_horse_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_horse_Diffuse.dds.

Importing FallenAlexandros_Mograine_horsearmor_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_horsearmor_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_horsearmor_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_horsearmor_Diffuse.dds.

Importing FallenAlexandros_Mograine_midloincloth_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_midloincloth_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_midloincloth_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_midloincloth_Diffuse.dds.

Importing FallenAlexandros_Mograine_Pauldrons_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_Pauldrons_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_Pauldrons_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_Pauldrons_Diffuse.dds.

Importing FallenAlexandros_Mograine_ridegem_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_ridegem_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_ridegem_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_ridegem_Diffuse.dds.

Importing FallenAlexandros_Mograine_ridegem_emissive.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_ridegem_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_ridegem_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_ridegem_emissive.dds.

Importing FallenAlexandros_Mograine_scarf_Diffuse.dds

Now Click the "Import File" Button:

Next select 'FallenAlexandros_Mograine_scarf_Diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file FallenAlexandros_Mograine_scarf_Diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file FallenAlexandros_Mograine_scarf_Diffuse.dds.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: