Introduction
This is an automatically generated tutorial. It will guide you through the process of importing the model Dragoon_Void of the bundle Dragoon_Void. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.
Extract and Access
I am assuming that you have already downloaded the file Protoss Unit Pack (Starcraft 2).zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).
When you have extracted the archive, it should look like this:
Open World Editor and click Module -> Import Manager:
This is the Import Manager. From here you can add and remove custom files from your map file:
Importing Dragoon_Void.mdx
Now Click the "Import File" Button:
Next select 'Dragoon_Void.mdx' in the folder which you extracted from the zip archive:
Dragoon_Void
dragoon_void_diff.blp
dragoon_void_emis.blp
electrical_arc_white.blp
starMiranaDisegraf.blp
Teal_Glow.blp
tesla_particle01_teal.blp
The file has been properly added to the map archive:
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
Done, you have imported the file Dragoon_Void.mdx.
Importing dragoon_void_diff.blp
Now Click the "Import File" Button:
Next select 'dragoon_void_diff.blp' in the folder which you extracted from the zip archive:
Dragoon_Void
Dragoon_Void.mdx
dragoon_void_emis.blp
electrical_arc_white.blp
starMiranaDisegraf.blp
Teal_Glow.blp
tesla_particle01_teal.blp
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
war3mapimported/dragoon_void_diff.blp
Double-click the file dragoon_void_diff.blp:
dragoon_void_diff.blp
Image / Texture
1,109
war3mapimported/dragoon_void_diff.blp
Tick the box "Use Custom Path" and type in the correct path:
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
The file has been properly added to the map archive:
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
Done, you have imported the file dragoon_void_diff.blp.
Importing dragoon_void_emis.blp
Now Click the "Import File" Button:
Next select 'dragoon_void_emis.blp' in the folder which you extracted from the zip archive:
Dragoon_Void
Dragoon_Void.mdx
dragoon_void_diff.blp
electrical_arc_white.blp
starMiranaDisegraf.blp
Teal_Glow.blp
tesla_particle01_teal.blp
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
war3mapimported/dragoon_void_emis.blp
Double-click the file dragoon_void_emis.blp:
dragoon_void_emis.blp
Image / Texture
168
war3mapimported/dragoon_void_emis.blp
Tick the box "Use Custom Path" and type in the correct path:
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
The file has been properly added to the map archive:
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
Done, you have imported the file dragoon_void_emis.blp.
Importing electrical_arc_white.blp
Now Click the "Import File" Button:
Next select 'electrical_arc_white.blp' in the folder which you extracted from the zip archive:
Dragoon_Void
Dragoon_Void.mdx
dragoon_void_diff.blp
dragoon_void_emis.blp
starMiranaDisegraf.blp
Teal_Glow.blp
tesla_particle01_teal.blp
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
electrical_arc_white.blp
Image / Texture
126
war3mapimported/electrical_arc_white.blp
Double-click the file electrical_arc_white.blp:
electrical_arc_white.blp
Image / Texture
126
war3mapimported/electrical_arc_white.blp
Tick the box "Use Custom Path" and type in the correct path:
electrical_arc_white.blp
Image / Texture
126
electrical_arc_white.blp
The file has been properly added to the map archive:
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
electrical_arc_white.blp
Image / Texture
126
electrical_arc_white.blp
Done, you have imported the file electrical_arc_white.blp.
Importing starMiranaDisegraf.blp
Now Click the "Import File" Button:
Next select 'starMiranaDisegraf.blp' in the folder which you extracted from the zip archive:
Dragoon_Void
Dragoon_Void.mdx
dragoon_void_diff.blp
dragoon_void_emis.blp
electrical_arc_white.blp
Teal_Glow.blp
tesla_particle01_teal.blp
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
electrical_arc_white.blp
Image / Texture
126
electrical_arc_white.blp
starMiranaDisegraf.blp
Image / Texture
133
war3mapimported/starMiranaDisegraf.blp
Double-click the file starMiranaDisegraf.blp:
starMiranaDisegraf.blp
Image / Texture
133
war3mapimported/starMiranaDisegraf.blp
Tick the box "Use Custom Path" and type in the correct path:
starMiranaDisegraf.blp
Image / Texture
133
starMiranaDisegraf.blp
The file has been properly added to the map archive:
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
electrical_arc_white.blp
Image / Texture
126
electrical_arc_white.blp
starMiranaDisegraf.blp
Image / Texture
133
starMiranaDisegraf.blp
Done, you have imported the file starMiranaDisegraf.blp.
Importing Teal_Glow.blp
Now Click the "Import File" Button:
Next select 'Teal_Glow.blp' in the folder which you extracted from the zip archive:
Dragoon_Void
Dragoon_Void.mdx
dragoon_void_diff.blp
dragoon_void_emis.blp
electrical_arc_white.blp
starMiranaDisegraf.blp
tesla_particle01_teal.blp
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
electrical_arc_white.blp
Image / Texture
126
electrical_arc_white.blp
starMiranaDisegraf.blp
Image / Texture
133
starMiranaDisegraf.blp
Teal_Glow.blp
Image / Texture
12
war3mapimported/Teal_Glow.blp
Double-click the file Teal_Glow.blp:
Teal_Glow.blp
Image / Texture
12
war3mapimported/Teal_Glow.blp
Tick the box "Use Custom Path" and type in the correct path:
Teal_Glow.blp
Image / Texture
12
Teal_Glow.blp
The file has been properly added to the map archive:
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
electrical_arc_white.blp
Image / Texture
126
electrical_arc_white.blp
starMiranaDisegraf.blp
Image / Texture
133
starMiranaDisegraf.blp
Teal_Glow.blp
Image / Texture
12
Teal_Glow.blp
Done, you have imported the file Teal_Glow.blp.
Importing tesla_particle01_teal.blp
Now Click the "Import File" Button:
Next select 'tesla_particle01_teal.blp' in the folder which you extracted from the zip archive:
Dragoon_Void
Dragoon_Void.mdx
dragoon_void_diff.blp
dragoon_void_emis.blp
electrical_arc_white.blp
starMiranaDisegraf.blp
Teal_Glow.blp
tesla_particle01_teal.blp
As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for.
You can find the required paths in the readme.txt and also on this page.
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
electrical_arc_white.blp
Image / Texture
126
electrical_arc_white.blp
starMiranaDisegraf.blp
Image / Texture
133
starMiranaDisegraf.blp
Teal_Glow.blp
Image / Texture
12
Teal_Glow.blp
tesla_particle01_teal.blp
Image / Texture
10
war3mapimported/tesla_particle01_teal.blp
Double-click the file tesla_particle01_teal.blp:
tesla_particle01_teal.blp
Image / Texture
10
war3mapimported/tesla_particle01_teal.blp
Tick the box "Use Custom Path" and type in the correct path:
tesla_particle01_teal.blp
Image / Texture
10
tesla_particle01_teal.blp
The file has been properly added to the map archive:
Dragoon_Void.mdx
Model
321
war3mapimported/Dragoon_Void.mdx
dragoon_void_diff.blp
Image / Texture
1,109
dragoon_void_diff.blp
dragoon_void_emis.blp
Image / Texture
168
dragoon_void_emis.blp
electrical_arc_white.blp
Image / Texture
126
electrical_arc_white.blp
starMiranaDisegraf.blp
Image / Texture
133
starMiranaDisegraf.blp
Teal_Glow.blp
Image / Texture
12
Teal_Glow.blp
tesla_particle01_teal.blp
Image / Texture
10
tesla_particle01_teal.blp
Done, you have imported the file tesla_particle01_teal.blp.
You're done
You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.
If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following:
- Link to the model and the tutorial
- Precise description of what does not work
- The map you tried to import it to (with the model imported)
And we will do what we can to help you.